Riprap, also known as rip rap, rip-rap, shot rock, rock armor, or rubble, is man-placed rock or other material used to armor shorelines, streambeds, bridge abutments, pilings and other shoreline structures against scour and water, wave, or ice erosion
Description: Mud Cleaner is the second stage and the third stage solids control equipment which is a combination of Desander, Desilter and underflow shaker shaker. Comparing with traditional separate Desander and Desilter, the mud cleaner has a higher cleaning function. The Underflow Screen equals another shaler shaker which receives the waste out from the cyclone nozzle for additional processing. So that mud cleaner could recover more valuable drilling mud. Mud cleaner is the ideal device of the second class and the third class solid control to treat the drilling mud.
Description: The Mud guns are meant to provide supplemental or primary mixing in mud tanks depending on the number being used and the pit size. They are best used in tank corners to keep solids from settling and a mud agitator is placed in the tank center.
Description: Mud Agitator, less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area.� 1.Compact design. Quiet, smooth, vibration free. 2.Durable, single reduction worm gear drive. 3.Fewer moving parts, less maintenance. 4.Compact design without coupling, IEC top brand gear box. 5.C-Face Explosion proof electrical motor direct connection with gear box. ATEX, IEC Ex, and Marine Model Motor (Kw) Speed (RPM) Impeller Size (mm) Impeller Qty (pcs) Ratio Weight (Kg) Dimension (mm) LKJBQ030D 3 60/72 (50HZ/60HZ) 650 1 25:1 154 717�?560�?471 LKJBQ055D 5.5 850 1 280 892�?700�?597 LKJBQ075D 7.5 950 1 287 980�?750�?608 LKJBQ075DD 800 2 297 LKJBQ110D 11 1050 1 402 1128�?840�?655 LKJBQ110DD 850 2 419 LKJBQ150D 15 1100 1 423 1158 840 655 LKJBQ150DD 950 2 441 LKJBQ185DD 18.5 1050 2 746 1270�?1000�?727 LKJBQ220DD 22 1100 2 820 1270�?1000�?727
SourcEEZ is a multi product Indian sourcing agency which handles END TO END sourcing operations. Right from vendor analysis and selection, to overseeing the course of production, and to finally warranting a smooth sail for your products, we ascertain that you have a stress-free grip on the procurement process as a whole.
The Manual tongs are necessary tools applied to make up and break out pipes. By changing the lug jaws and latch steps the manual tongs can hold different size of tongs.They are designed and manufactured according to API 7K for well drilling equipment. The B type manual tongs are includes B type, SB type, and DB type, SDD,LF, Type C, workover tongs, WWC, WWB,AAX, Casing tong, Extended casing tons.
1.Increased rate of penetration. 2.Better hole deviation control. 3.Reduction in drill string failure rate. 4.Reduction in wear and tear of the swivel, Kelly, and rotary drives. 5.Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor. 6.Big torque, high effective, wide flow rate range, running stable and long using time. 7.API Spec. Standard
1.API 7-1 Standard connection 2.Tricone bit is suitable for any rock formation. 3.Tricone bit is versatile and can handle changing formations. 4.PDC Main cutters are high performance PDC cutters to insure service life of the bit while improving ROP. 5.Hydraulic system of the bit is optimized using dynamic flow pattern simulation technology to enhance cleaning and cooling effects of the bit to effectively prevent bit from balling.
1. The drill rods comply with the provisions of API SPEC 5D & API SPEC7. 2. The grade of steel are determined according to the requirements of Group 1 & Group 3 of API SPEC 5D. 3. Drill pipe joints at the same level comply with the provisions under the Standard API SPEC 7. 4. Standard pipe size range: 2-3/8â??~6-5/8â?? 5. Hardbanding: The wear rate is less than 6% of that of bare tool joint, which can prolong 3 times of the tool joint service life. Good property of friction-reduction, which can reduce the casing wear to the least, and its wear to casing is less than 11% of that of bare tool joint. Reduce the torque of drilling string. 6. Widely used for oil, gas, water well and geothermal fields in Turkey, Poland, Japan, Singapore etc.
Kellys are manufactured with one of two drive configurations, square or hexagonal. Square kellys are furnished as forged or machined in the drive section. Hexagonal or fully machined square kellys are machined from full length quenched and tempered round bars. Square Kelly and hexagonal kellys are fabricated as per requirements of customers. The kellys are made of AISI 4142H-4145H forged or rolled alloy structural steel. Quenching plus tempering thermal treatment will be conducted over the whole length. Its Brinell hardness can reach 285-341 on the basis of such thermal treatment. Charpy impact energy: >or =54J. The formulated process can ensure that the misalignment of the hole reaches the standard wall thickness. Kelly bars are manufactured according to API-7-1 Spec.
1. Hardness range of 285 to 341 BHN and a charpy impact value of 40ft/lbs are guaranteed for evenly distributed 16 points in any cross sections at room temperature. 2. Connections as phosphate coated father machining to protect the threads from corrosive elements and to prevent galling upon initial make -up. Thread roots are cold rolled on API and H0-90 connections. 3. Pressed steel thread protectors are supplied to all drill collar that are equipped with standard connections. 4. Manufactured strictly according to API standard. 5. Widely used in oil, gas, HDD and geothermal field.
1.Made of 4145H alloy structural steel. 2.Production complies with the provisions under the Standard SY/T 5146-1997. Connector screws comply with the provisions of the Standard API SPEC 7-1. 3.The tube section has a larger diameter at mid length to protect the heavy weight drill pipe from wear. 4.Hardbanding and Internal Coating can be provided on customer request.
1.The product is used for the reaming of the oil, gas, petrochemical, sewage, power and fiber optic pipelines in the no-dig horizontal directional drilling. 2.Directional crossing operation is widely used in unexcavated project. 3.Small torque force can be applied to hole opening with drilling machine. 4.Hole opener includes body and the cutter. 4 different types of cutter can be assembled to the body in one size for opening the hole in 4 sizes. 5.Cutter can be divided into MT type used in soft formation and TCI type used in hard formation.
1.API standard drilling cross-over sub 2.BOX x BOX, BOX x PIN, PIN x PIN 3.Different API Standard connection type, e.g. NC, REG, FH, IF etc. 4.Apply to HDD, Geothermal, Gas, Oil and Water well drilling.
Model KD600 - Function: drilling - Number of pully: 2 units - Drill route: 50 mm - Distance from spindle nose to the table: 120 mm - Distance from center of spindle nose to column: 104.5 mm - Column diameter: �? 46.5 mm - Bit diameter: �?1.5 - �?13 - Motor: 1/4HP â?? 1 phase â?? 4P (220V/50Hz) Model KD800 - Function: Drilling - Number of pully: 2 units - Drill route: 58 mm - Distance from spindle nose to the table: 255 mm - Distance from center of spindle nose to column: 126.5 mm - Column diameter: �? 58.5 mm - Bit diameter: �?3 - �?13 - Motor: 1/2HP â?? 1 phase â?? 4P (220V/50Hz) Model KDC800 - Function: drilling and tapping - Number of pully: 3 units - Drill route: 58 mm - Distance from spindle nose to the table: 245 mm - Distance from center of spindle nose to column: 126.5 mm - Column diameter: �? 58.5 mm - Bit diameter: �?3 - �?13 - Motor: 1/2HP â?? 1 phase â?? 4P (220V/50Hz)
NFPA 130 Standard for fixed guideway transit and passenger rail systems Standard Introduction This standard shall cover fire protection requirements for underground, surface, and elevated fixed guideway transit and passenger rail systems, including trainways, vehicles, and vehicle maintenance and storage areas, and for life safety from fire in fixed guideway transit and passenger rail system stations, trainways, vehicles, and outdoor vehicle maintenance and storage areas. Test Method Surface Material : ASTM E162 Surface Flammability & ASTM E662 Smoke Density Elastomers : ASTM C 1166 & ASTM E 662 Fabrics : 14 CFR 25 & ASTM E 662 Cushioning : ASTM D 3675 & STM E 662 Small Compoment : ASTM E 1354 Heat Release Reference Standards ASTM E 162 Surface Flammability of Materials Using a Radiant Heat Energy Source ASTM E 662 Specific Optical Densityof Smoke Generated by Solid Materials ASTM C 1166 Flame Propagation of Dense and Cellular Elastometric Gaskets ASTM D 3675 Surface Flammability of Flexible Cellular Materials ASTM E 1354 Test Method for Heat and Visible Smoke Release Rates Bombardier SMP800-C Toxic Gas Generation Test We also can provide the following service of fire test to Railway EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers NFPA 130 Standard for fixed guideway transit and passenger rail systems DIN5510-2 Fire behaviour of materials and parts, classification, requirement and test methods BS6853 Code of practice for fire precautions in the design and construction of passenger carrying trains NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
Brand : Cock Brand and Sea Horse Brand Diameter : From 1.5mm to 120 mm Number of strands : 3,4,8 Core : No Main material : Polypropylene Composition : PP, PE, Masterbatch, UV Color : Light brown, Yellow, Yellowish Orange, Grey, White, Blueâ?¦ Diverse colors with more than 20 durable colors prevent the productâ??s color from fading away as being used Length : Standard roll of 200m and as ordered by customers Quality standard: According to TCCS no.01-2013/Siam Brothers VN, dated 04/09/2013. Characteristics : - Durable and highly adhesive - High anti-corrosion ability - High tensile strength ( 50% higher than other types of rope) - Light weight, float on water - High ultraviolet ray resistance - High temperature bearing capacity, no decaying, no oil penetration or dissolving in any chemical. Application: Mooring rope, tail rope, main rope of net, trawl rope, sport, maritime transportation, industry and agriculture, etc. â?¦ Cautions: - Use less than 80% of standard tensile strength - Avoid contacting with heat, fire, chemical, sharp objects. - Avoid sunlight if products are not used in a long time Produced by: Siam Brothers Viet Nam Joint Stock Company.
Description: Drilling hose(rotary hose)made according to API 7K spec, applies for flexible hose connection between the top of oil drilling stand pipe and vertical moved swivel joint in well drilling, well cementing, work-over and down-hole servicing operation. drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake, sometimes to transfer high pressure oil and water base mud with the lowest aniline point of 60�°C from the swivel pipe in high pressure, and down-hole operation high medium such as water, oil etc, drilling rotary hose can be used for prefect work too.
Description: A� rotary table is a mechanical device on a drilling rig that provides clockwise (as viewed from above) rotational force to the� drill string� to facilitate the process of drilling a� borehole.
Drill subs are an important integral part of everyday drilling. Not having the right thread adapter can make your life miserable. We have a large inventory of common and not so common sizes. Custom sizes are always available. Rotary subs have two primary applications. They can be used to cross over from one connection size to another, or as the disposable component used to extend the connection life of a more expensive drill stem member. Installing a float sub (with check valve) is always a good idea when drilling in wet situations.
