API 7K Mud Pump Parts Gasket O-Ring Packing Product Description Lake Petro offers a wide range of gaskets and packing materials for usage in drilling pumps. Gaskets and packings made of polyurethane, rubber and combination of fabric and rubber. Lake Petro has very rich experience in supplying spare parts of mud pump to the worldwide Oil Drilling industry.We stock and sell a wide selection of mud pump fluid end expendables and spares parts. Mud pump parts for F series mud pump, For P series mud pump, For PZ series mud pump, For 3NB series mud pump. These parts include liners, pistons, valves & seats,piston rods, rod clamps, extension rods, all fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings.
Rongsheng F1600 Mud Pump Crosshead Product Description The crosshead supplied by Lake Petro is manufactured from high quality, cast steel and the guides are from a quality manganese bronze normally used in bearings. This combination of materials provides a low friction interface and generates very little heat, which indications no friction, which equates to no wear. Lake Petro has very rich experience in supplying spare parts of mud pump to the worldwide Oil Drilling industry.We stock and sell a wide selection of mud pump fluid end expendables and spares parts. Mud pump parts for F series mud pump, For P series mud pump, For PZ series mud pump, For 3NB series mud pump. These parts include liners, pistons, valves & seats,piston rods, rod clamps, extension rods, all fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings.
The following example is for you reference: 1.Description: Manual tongs are necessary tools applied to make up and break out pipes.Changing lug jaws and latch steps can adjust different handling sizes of the tongs.They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q3 1/2"~13 3/8"-75 Type SB Manual Tong Type SB Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling .The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps.The available range of manual tong is from 3 1/2~13 3/8 inch. 2.Key Words: Manual Tong, Drilling Manual Tong, SB Type Manual Tong. 3.Features: (1).API 7K certified quality assured. (2).Easy to operation to holding different size by changing the lug jaw. (3).Spare parts available after sales,all parts are traceable. (4).Size range from 3 1/2~13 3/8. (5).Rated Torque range from 40kN·m to 75kN·m. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 7K. 7.Condition: New. 8.Color: Required. 9.Model: Type SB. 10.Rated Torque(kN*m): 40~75. 11.Size Range: 3 1/2"~13 3/8". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 30days. 19.Supply Ability: 50sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
The following example is for you reference: 1.Description: Manual tongs are necessary tools applied to make up and break out pipes.Changing lug jaws and latch steps can adjust different handling sizes of the tongs.They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q3 1/2"~17"-90 Type DB Manual Tong Type DB Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling .The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps.The available range of manual tong is from 3 1/2~17 inch. 2.Key Words: Manual Tong, Drilling Manual Tong, DB Type Manual Tong. 3.Features: (1).API 7K certified quality assured. (2).Easy to operation to holding different size by changing the lug jaw. (3).Spare parts available after sales,all parts are traceable. (4).Size range from 3 1/2~17. (5).Rated Torque range from 55kN·m to 90kN·m. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 7K. 7.Condition: New. 8.Color: Required. 9.Model: Type DB. 10.Rated Torque(kN*m): 50~90. 11.Size(in): 3 1/2"~17". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 30days. 19.Supply Ability: 300sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
The following example is for you reference: 1.Description: Manual tongs are necessary tools applied to make up and break out pipes.Changing lug jaws and latch steps can adjust different handling sizes of the tongs.They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q4"~17"-135 Type SDD Manual Tong Type SB Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling .The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps.The available range of manual tong is from 4~17 inch. 2.Key Words: Manual Tong, Drilling Manual Tong, SDD Type Manual Tong. 3.Features: (1).API 7K certified quality assured. (2).Easy to operation to holding different size by changing the lug jaw. (3).Spare parts available after sales,all parts are traceable. (4).Size range from 4~17. (5).Rated Torque range from 80kN·m to 135kN·m. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 7K. 7.Condition: New. 8.Color: Required. 9.Model: Type SDD. 10.Rated Torque(kN*m): 80~135. 11.Size Range: 4"~17". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 30days. 19.Supply Ability: 300sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
The following example is for you reference: 1.Description: Manual tongs are necessary tools applied to make up and break out pipes.Changing lug jaws and latch steps can adjust different handling sizes of the tongs.They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q3 3/8"~12 3/4"-75 Type B Manual Tong Type B Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling .The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps.The available range of manual tong is from 3 3/8~12 3/4 inch. 2.Key Words: Manual Tong, Drilling Manual Tong, B Type Manual Tong. 3.Features: (1).API 7K certified quality assured. (2).Easy to operation to holding different size by changing the lug jaw. (3).Spare parts available after sales,all parts are traceable. (4).Size range from 3 3/8"~12 3/4". (5).Rated Torque range from 55kN·m to 75kN·m. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 7K. 7.Condition: New. 8.Color: Required. 9.Model: Type B. 10.Rated Torque(kN*m): 55~75. 11.Size Range: 3 3/8"~12 3/4". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 20days. 19.Supply Ability: 300sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
Drilling machine to potholing
The following example is for you reference: 1.Description: Model CD side door elevators with square shoulder are suitable for handling tubings, casings, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and supplied according to API Spec 8A/8C Specification for drilling and production hoisting equipment. 2.Features ï¼?1ï¼?API certified products, national best quality. ï¼?2ï¼?Load capacity from 100ton to 750ton. ï¼?3ï¼?Easy to operation while well drilling. ï¼?4ï¼?100% NDT test for critical parts on the elevator. 3.Key words: CD side door elevator; drilling elevator; tubing elevator; casing elevator. 4.After-sales Service Provided:No overseas service provided. 5.Warranty:one year. 6.Certification:API 8A/8C. 7.Condition:New. 8.Material:Carbon Steel. 9.Processing Type:Casting. 10.Machine Type:Drilling Equipment. 11.Use:Well Drilling. 12.Processing Time:50days. 13.Supply Ability:5000sets/per year. 14Packing&Delivery: ï¼?1ï¼?Packing Details:Standard Export Package. ï¼?2ï¼?Port:China Main Port.
The following example is for you reference: 1.Description: DDZ series elevators are center latch elevators with 18 degree taper shoulder,applied in handling the drill pipes and drilling tools,etc.the load ranges from 100 tons to 750 tons and the size ranges from 2 3/8" to 6 5/8".It was design verification tested at more than two times the max,test load, and underwent ex-factory test at one and a half times the rated load.the products shall be designed and manufactured according to the requirements in API Spec 8A/8C Specification for drilling and production hoisting equipment. 2.Features: (1).Centralizer type elevator easy to operation. (2).100% NDT test, hydraulic test, Load capacity test according to API 8C. (3).Wear limit form provided for spare parts. (4).Load capacity from 100-750tons. (5).Short on deliver time. 3.Key Words: DDZ drilling elevator, Centralized elevator, Well drilling elevator. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 8A/8C. 7.Condition: New. 8.Color: Red. 9.Model: DDZ-100; DDZ-150; DDZ-250; DDZ-350; DDZ-350TD; DDZ-500; DDZ-500TD; DDZ-750. 10.Rated Capacity(short tons): 100~750. 11.Size(in): 2 3/8"~6 5/8". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 20days. 19.Supply Ability: 400sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
The following example is for you reference: 1.Description: Hydraulic elevator type DDZH is a center latch elevator. Through changing the bushing,it can handle drill pipes,drill collars,casing and tubings.By using the hydraulic-controlled system,it can make the operation more convenient,reduce the workers labor intensity effectively and improve work efficiency.It can also realize remote controlling and make the using safer and more reliable.The products shall be designed and manufactured according ti API Spec 8A/8C Specification for drilling and production hoisting equipment. 2.Key Words: Hydraulic Elevator, Drilling Elevator, DDZH Type Elevator. 3.After-sales Service Provided: No overseas service provided. 4.Warranty: one year. 5.Certificaiton: API 8A/8C. 6.Condition: New. 7.Color: Red. 8.Model: DDZH-250; DDZH-350; DDZH-500. 9.Rated Capacity(short tons): 250~500. 10.Place of Origion: China(Mainland). 11.Minimun Order: 1Set(s). 12.Material: Carbon Steel. 13.Processing Type: Casting. 14.Machine Type: Handling Tools. 15.Use: Well Drilling. 16.Processing Time: 30days. 17.Supply Ability: 500sets/per month. 18.Payment Terms: T/T; L/C; Western Union. 19.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
waterv well machine - rotary table systyem - 1200 meter capacity
Rotary Drilling/Vibrator Hose Tube: NBR, specially compounded for handling abrasive, corrosive and oily drilling mud Reinforcement: Multiple layers of polyester cord over tube, high tensile steel cables. Cover: NBR, Specially compounded, resistant to abrasion, corrosion, cutting, gouging, oil and weather. Application: Flexible Connection between standpipe and swivel(Rotary Drilling) or between pump and standpipe(Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Fitting: Hammer Unions, API Male End, Flanges Attachment: Safety Clamp & Chain Applicable Standard: API Spec 7k/ISO14693
High-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity. Thanks to the split point, this drill has good centring properties and requires little pressure.
·Material: High Speed Steel HSS M2(6542) ·Standard: DIN 345/DIN341/DIN1870/ANSI ·Process: Roll Forged/Milled ·Split Point: 118°/135° ·Surface: Bright ·Shank Type: Morse Taper Shank ·Morse Taper Shank No: 1 to 6 ·Advantage: Perfect performance in sharpness, precision, smoothness and toughness ·Applied material: Stainless steel, high carbon steel, general steel, aluminum, alloy steel, cast iron
Key Process: Roll Forged/Milled Raw Materials: HSS 4241/4341/9341/6542/M35 Product Standards: DIN 345/DIN341/DIN1870/ANSI Cutting Edge: 118° Chisel/Split Point / 135 Split Point Surface Finishes: Black Oxide/Coffee Flute Type: Right Flute Shank Types: Morse Taper Shank Product Sizes: Metric Size(5.0mm-100mm) Applications: Suitable for drilling general steel, alloy steel under HRC 35, iron,stainless steel.
1. Good Surface 2. High Precision 3. Good Performance 4. Certification:ISO9001:2008 , Supplier Assessment Certificate
Material: Solid Carbide, Tungsten Carbide Coating: Tialn, HE Type: Solid Carbide Drills Helix Angle: according to your demand ,non-standard products custom accepted Tolerance: M7 Feature: Heat and wear resistance, special flute design and coating Suitable for: Suitable for drilling generally steel, cast steel under HRC50, cast iron and stainless steel.
Standard: DIN352 Raw Material: HSS M35 / M2 Size: M1.2-M27 Type: Straight Flute Tap Standard: DIN/ANSI/JIS Hole: Blind hole/Through hole Application: For through/blind Holes in Alloy Steel, Carbon Steel, Steel, Cast Iron, Copper, aluminum and so on. MOQ: 100PCS Packing: 1.bulk+carton+pallet 2.small box+carton+pallet 3.color box+carton+pallet 4.As you require Payment Terms: L/C,T/T Delivery Time: 5-30 Days after order confirmed
1.With heat and wear resistance, the special design of flute and tooth-type with thousands times testing can improve working efficiency and reducing the working cost. 2.Suitable for processing through hole and blind hole of the internal thread. 3.The tap let dust tank in a spiral, have bigger spiral Angle, the smooth clearance, increase before work Angle, reduce the tapping torque. 4.Cutting efficiency of the taps is high, the clearance effect is good, strength, long service life, cutting torque is small, the machining accuracy stability etc. 5.The taps is suitable for ductile metal products and discontinuous surface of the screw hole tapping work, blind hole and deep blind. 6.Has simple structure, easy to use; can be manual operation, also can work on the tool machine, is widely applied in the production.
1. Standard:DIN338 2. Material: HSS M42(8% Cobalt) / M35 (5% Cobalt) 3. Process: Fully Ground 4. Cutting Edge: 118° General Angle / 135° General Angle / Fast Drill Bits / 118 ° Split Point/ 135 ° Split Point 5. Usage: For Stainless steel, high temperature alloy, titanium alloy, high strength steel and carbon fiber composite materials etc.
