1. Applications of HZ-130Y hydraulic core drilling rig
·geological survey and exploration
·basic exploration for roads
·high-rise buildings
·inspection holes for various concrete structures
·river embankments
·grouting holes
·direct grouting,
·civil water well
·ground temperature central air
conditioners.
2.Features of HZ-130Y hydraulic core drilling rig
·Hoist installation holder, forming structure of double support wheel, can withstand strong impact.
·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer.
·This machine adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required.
·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission
3.Technical parameters of HZ-130Y hydraulic core drilling rig
HZ-130Y hydraulic core drilling rig
Drilling depth 130m
Maximum open hole caliber 220mm
End hole caliber 75mm
Drill rod caliber 50mm
Drilling angle 90-75°
Drill weight (Not include power) 750kg
Spindle
Spindle speed 142 285 570r/min
Spindle stroke 450mm
Hoist
Max.single line hoisting capacity 1600kg
Single line lifting speed 0.41/0.82/1.64m/s
Drum diameter 140mm
Wire rope diameter 13mm
Tightrope caliber 27m
Mud pump
Type Horizontal single urn twin-action
Electric motor 95/77 l/min
Maximum pressure 1.2mpa
Work pressure 0.7mpa
Water inlet caliber 30mm
Water to exit caliber 20mm
Triangle conveyer belt B1575mm
1.Brief introductions of HZ-130YY hydraulic core drilling rig
HZ-130YY hydraulic core drilling rig adds shifting slipway on the basis of common drilling rig, which can realize rapid replacement of drilling tools and improve work efficiency and reduce labor usage.
1.Applications of HZ-130YY hydraulic core drilling rig
·this core drilling rig is suitable for drilling water well, soil exploration, geophysical exploration, road and building exploration and drilling blasting holes.
·drilling bits can be chosen according to the different soil condition, such as alloy, diamond and composite.
·2-9 grades of sandy clay and rock.
3.Features of HZ-130YY hydraulic core drilling rig
·the automatic feed mechanism with oil pressure can improve the drilling efficiency and reduce the labor intensity of the workers.
·the ball card holding mechanism is used instead of the chuck, which can be operated without stopping the rod, and the operation is convenient, safe and reliable.
·hoist is installed with holder, forming structure of double support wheel so that it can withstand strong impact
·four groups of bearings are located in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complicated geological conditions such as the gravel layer, the pebble layer and so on.
This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance.
4.Technical parameters of HZ-130YY hydraulic core drilling rig
HZ-130YY hydraulic core drilling rig
Drill hole depth 130m
Maximum opening diameter 75-220mm
Final hole diameter 75mm
Take the initiative to drill pipe 53/59*4200mm
Drill pipe diameter 50mm
Borehole inclination 90°-75°
Power(diesel engine) 13.2kw 2200r/min
Size 850kg/2400*950*1400
Vertical shaft
Vertical spindle speed 142/285/570r/min
Vertical stroke 450mm
Hoist
Single rope lift 9.6kn
Single rope winding speed 0.41/0.82/1.64m/s
Drum diameter 140mm
Diameter of wire rope 9.3mm
Wire rope capacity 27m
Derrick
Rated load 2t
Effective height 6m
Towerleg specifications 73mm
Mud pump
Model BW95
Flow 95l/min
Maximum pressure 1.2mpa
Reciprocating frequency 93r/min
Suction pipe diameter 51mm*4.5m
Diameter of high pressure pipe 32mm*6m
1. Characteristics of XYD-200 crawler hydraulic core drilling rig
·drilling rig uses automatic Telescopic drilling rig ,it uses two high-strength cylinders to support.There is a group of hydraulic valves to control super nation of drill tower so that it saves time and effort, safe and reliable when user operates, the maximum for the user to create benefits.
·the chassis uses a rubber belt track so that the weight is light,the cost of life cycle is lower.It can reduce noise of the vehicle walking mechanism,reduce car bodyï¼?s shake,reduce the oil consumption.It can walk on the pavement of city and donï¼?t hurt the pavement.
·the chassis comes with four high-strength threaded legs(or Hydraulic high leg) the threaded legs install rate and adjust is fast and convenient, can be used for work plane leveling.It can make loading and unloading reduce the cost of to improve efficiency.It also can be used as auxiliary support when the track drilling rig is working.
·using 48V electric starting diesel engine is reduced the operateï¼?s labour intensity greatly.Especially in cold season,when diesel engine start hardly,it will show superiority vastly.
·the machine is equipped with BW-160 independent mud pump,the pump flow and pressure are big,the maintenance is convenient,the parts of the machine are convenient to buy all over the country.
2. Technical parameters of XYD-200 crawler hydraulic core drilling rig
XYD-200 crawler hydraulic core drilling rig
Drilling depth 200m
Maximum opening diameter 75-300mm
Final hole diameter 75mm
Kelly 53/59*4200mm
Drill pipe diameter 50/60mm
Drilling angle 90°-75°
Auxiliary power diesel engine 16.2kw 2200r/min
Structural weight/Size 3000kg 3800*1950*2700
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Windlass
Single rope lifting force 24kn
Single rope lifting speed 0.12/0.22/0.49/0.95m/s
Drum diameter 140mm
Wire rope diameter 13mm
Wire rope capacity 35m
Derrick
Rated load 5t
Effective height 6m
Tower leg specification 89mm
1. Characteristics of XYC-200A tricycle-mounted hydraulic core drilling rig
·XYC-200A tricycle-mounted hydraulic core drilling rig is multi-function hydraulic vehicle-mounted core drilling machine .
·The tricycle is Tricar. The drilling rig, engine, BW-160 pump and hydraulic drill tower are all installed on the tricycle, so it us easy for transportation.
·XYC-200A tricycle-mounted hydraulic core drilling rig with BW160 pump which has high pressure and high flux, to ensure the drilling depth and hole diameter.
·The tricycle drilling rig is equipped with shift unit,so the drilling rig can move back and forth
·The highest speed can reach 1045r/min with 5 gears, which improves the drilling efficiency
·The drilling rig is Adopted 53*59 drilling rod, which has high rigidity and strong delivery torque
·Equipped with taper clutch, made the machine easy to operate and free of maintenance.
·Use large module planetary gear and add supporting frame, highly increased hoisting and braking ability of the winch.
·Vertical spindle are fixed by four groups of bearings to ensure that the core rig is rigid enough for gravel layer and other complex geological conditions.
2. Parameters of XYC-200A tricycle-mounted hydraulic core drilling rig
Drilling depth 200m
Max. open hole diameter 75-260mm
End hole diameter(mm) 75
Drill rod diameter 50mm
Drilling tower height 6500mm
Drilling angle 90-75
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Hoist
Max. single line hoisting capacity 1600kg
Single line lifting speed 17/35/75/151r/min
Tightrope diameter 12.5mm
Tightrope cubic measure 35mm
Hug floodgate belt width 70mm
Mud Pump
Type Horizontal Single Urn Twin-action
Discharge displacement 170l/min.
Diesel S1115 22HP
Electric motor 15kw,1440r/min
Max. pressure 1.5mpa
Work pressure 0.7mpa
Water inlet diameter 30mm
Water outlet diameter 25mm
Triangle conveyre belt B1728mm
Chassis
Chassis Tricar(Pictures of vehicle-mounted drilling rigs for reference only)
1.Features of XY-130 hydraulic core drilling rig
·Hoist installation holder, forming structure of double support wheel, can withstand strong impact.
·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer.
·This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required.
·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission
2.Specifications of XY-130 hydraulic core drilling rig
XY-130 hydraulic core drilling rig
Drilling depth 130m
Maximum open hole caliber 220mm
End hole caliber 75mm
Drill rod caliber 50mm
Drilling angle 90
Drill weight (Not include power) 600kg
Spindle
Spindle speed 142 285 570r/min
Spindle stroke 450mm
Hoist
Max.single line hoisting capacity 1600kg
Single line lifting speed 0.41/0.82/1.64m/s
Drum diameter 140mm
Wire rope diameter 13mm
Tightrope caliber 27m
Mud pump
Type Horizontal single urn twin-action
Electric motor 95/77 l/min
Maximum pressure 1.2mpa
Work pressure 0.7mpa
Water inlet caliber 30mm
Water to exit caliber 20mm
Triangle conveyer belt B1575mm
Matched driving power (diesel engine and motor) 18hp diesel engine and 11kw motor
5726 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
1.Applications of HZ-200Y hydraulic core drilling rig
Geological survey and exploration, road and high-rise building foundation exploration, and all kinds of concrete structure inspection holes, river embankments, subgrade grouting holes, drilling and direct grouting, civil water well and ground temperature central air conditioners.
2.Features of HZ-200Y hydraulic core drilling rig
·adopts 53*59 hexagon drilling, which has high rigidity and strong delivery torque.
·the machine is equipped with taper clutch, with the charactristics of strong transmission troque, easy operation and free of maintenance.
·for the winch, we use large module planetary gear and add supporting frame, greatly increasing hoisting and braking ability of the winch.
·vertical spindle are fixed by four groups of bearings to ensure that the core machine is rigid enough for gravel layer and other complex geological conditions.
·we are the first one to equip mud pump with the flow 160L/min in China so that it will save cost and also make the machine compct, moblie and light in weight.
3.Technical parameters of HZ-200Y hydraulic core drilling rig
HZ-200Y hydraulic core drilling rig
Drilling depth 200m
Max open hole caliber 300mm
End hole caliber 75mm
Drill rod caliber 60mm
Drilling angle 90°-75°
Drill weight(without power) 1100kg
Triangle conveyer belt B950*4 B1700*3
The main machine moving distance 300mm
Power Diesel engine 22HP Electric motor 15kw
Spindle
Spindle speed 64/128/287/557 r/min
Spindle stroke 450mm
Hoist
Max.lifting capacity 2400kg
Single line lifting speed 0.41/ 0.82/1.64 m/s
Wire rope caliber 13mm
Wire rope length 35m
Hug floodgate caliber 260mm
Hug floodgate belt width 70mm
Mud pump
Type Horizontal single-urn twin-action
Displacement Diesel engine 170L/min
Electric motor 150L/min
Maximum pressure 3Mpa
Work pressure 1.5Mpa
Inlet pipe caliber 40mm
Outlet pipe caliber 30mm
Triangle conveyer belt B1728mm
Mud pump
Type CBTF314
Triangle conveyer belt B1100Ã? 1
1. Characteristics of XYX-200 wheeled hydraulic core drilling rig
·hydraulic cylinder, high efficiency
·wheeled walking mechanism, very convenient for transport and adjusting the drilling rig level.
·pressure gauge display the condition of the bottom of the drill hole.
·the drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod.
·the working efficiency is high and the operation is convenient, safe and reliable.
2. Technical parameters of XYX-200 wheeled hydraulic core drilling rig
XYX-200 wheeled hydraulic core drilling rig
Drill hole depth 200m
Maximum opening diameter 300mm
Final hole diameter 75mm
Drill pipe diameter 60mm
Borehole inclination 90°-75°v
Rig weight (without power) 1300kg
Trigonometric belt B950*4 B1700*3
Active moving distance 300mm
Power Diesel engine/motor 22hp/16.2kw
A vertical scroll of painting
Shaft rotation speed 64/128/ 287/ 557 r/min
Vertical axis stroke 450mm
Windlass
Maximum lifting weight of single rope 2400kg
Single rope lifting speed 0.41/ 0.82/1.64m/s
Wire rope diameter 13mm
Wire rope capacity 35m
Hug floodgate caliber 260mm
Hug floodgate belt width 70mm
Mud pump
Type Horizontal single cylinder double action
Maximum displacement Diesel engine 170L/min
Matching motor 150L/min
Maximum pressure 3Mpa
Work pressure 1.5Mpa
Inlet pipe caliber 40mm
Outlet pipe caliber 30mm
Triangle conveyer belt B1728mm
Type CBT-F-314
Triangle conveyer belt B1100*1
1. Characteristics of XYX-3 wheeled hydraulic core drilling rig
·The drilling rig is equipped with wheeled walking mechanism and hydraulic cylinder support, which is convenient for the whole machine to be relocated and easy to adjust the level of the drilling rig.
·Using the ball card holding mechanism to replace chuck,can implement non-stop down rod,convenient operation,safe and reliable.
·With oil pressure feeding mechanism to improve drilling efficiency
·The pressure gauge is provided with the pressure gauge of the bottom of the hole, so it is easy to master the hole in the hole.
·The lifting and falling tower is hydraulic operation, which is convenient and reliable.
·The diesel engine uses electric start to reduce the labor intensity of the worker.
2. Parameters of XYX-3 wheeled hydraulic core drilling rig
Drilling depth 100/ 250 / 300/ 600 m
Maximum opening diameter 300 / 200 /150 / 75mm
Max open hole caliber 300mm
Final hole diameter 75mm
Drill pipe 60mm
Borehole inclination 90°-65°
A vertical scroll of painting
Vertical rotation speed of vertical axis 30-1050r/min
Vertical reversal speed 29-137r/min
Vertical axis stroke 560mm
Diameter of shaft inner hole 96mm
Vertical axis lifting capacity 60kn
Main hoist (hydraulic drive)
Single rope lifting speed 0-45m/min
Wire rope diameter 14mm
Band width 90mm
Drum diameter 300mm
Reel capacity 30m
Maximum lifting capacity of single rope 40kn
Auxiliary hoist (hydraulic drive)
Drum diameter 140mm
Diameter of steel wire 6mm
Reel capacity 450m
Mud pump
Mud pump BW-250 Horizontal three cylinder
Flow 250 l/min
Working pressure 7mpa
Inlet diameter 75mm
Outlet diameter 50mm
Gear oil pump
Double oil pump CBF-F63/25
Front-end flow pressure 63 l/min 20mpa
Backend flow pressure 25 l/min 20mpa
Rig power
Diesel engine FAW Xichai 4 cylinder
Electric machinery Y180L-4 22KW
Wheeled chassis
Bearing capacity of wheel chassis 3.5t
Wheel chassis length 2.6m
Wheel chassis width 2m
Wheel chassis height 0.6m
1.Brief introductions of YQZ-30 hydraulic core drilling rig
YQZ-30 hydraulic core drilling rig is a small portable diesel oil drilling machine. It is mainly used for prospecting and exploration, geophysical exploration,drilling engineering such as road construction and blasting hole, shallow oil, natural gas and groundwater drilling. It also can be used for engineering drilling of dam grouting and tunnel ventilation and drainage. The drilling depth of YQZ-30 hydraulic core drilling rig is 30 meters. The open hole diameter is 89mm, and the final hole diameter is 75mm.
2.Features of YQZ-30 hydraulic core drilling rig
·Oil pressure automatic feeding mechanism, high drilling efficiency.
·Using the upper ball clamp mechanism, non-stop re-chuck
·Handles are centralized, easy to operate, safe and reliable.
·Compact structure, small floor space.
·The shell of drill rig and gearbox are made of aluminum. The shell reduce the weight of the fuselage.
· Easy to decomposition and move, suitable for working in hilly terrain, mountainous areas and other complex terrain.
3. Technical parameters of YQZ-30 hydraulic core drilling rig
Main engine
Drilling depth 30m Drill pipe diameter 42mm
Open hole diameter 91-110mm End hole diameter 75 mm
Drilling rig weight 198kg(No power) Drilling rig dimension 1400*600*1055mm
Windlass
Maximum hoist capacity 4kn Coiling block diameter 90mm
Wire rope diameter 8mm Maximum length 18m
The band type brake diameter 200mm The band type brake width 35mm
Vertical shaft
Rotating speed 136/338/578r/min Stroke 400mm
Maximum pressure 8kn Lifting power 10kn
Oil pump
Model YBC20/125 Rated pressure 12.5Mpa
Rate of flow 20ml/r Rated rotate speed 1500r/min
Power
Diesel engine R180 Cooling type water-cooling
Rated power 5.67KW Rated rotate speed 2600r/min
4.Configuration list of YQZ-30 hydraulic core drilling rig
Item Specification Unit Quantity
Hydraulic core drilling rig YQZ-30 Platform 1
Drill pipe including joint 42 m 30
Reducing nipple joint 57/57 pc 2
Reducing nipple 89*57 pc 1
Opening pipe 89 pc 1
Alloy bit 91 pc 1
Reducing nipple 73 pc 1
Core barrel 73 pc 1
Diamond bit 75 pc 1
Water pump diesel engine power set 1
Drill tower 3m set 1
Wire rope 10mm m 20
Rope cappel pc 4
U shape ring pc 1
Flat square main rod 2m/pc pc 1
Reducing nipple for main rod pc 1
Water faucet pc 1
Lifter pc 1
U-fork 57 pc 1
Safety clamp 57 pc 1
Pliers 24 pc 1
L-wrench 73/89 pc 2
1.Applications of HZ-200YY hydraulic core drilling rig
HZ-200YY hydraulic core drilling rig is mainly used for geological general investigation and exploration, road and tall building foundation exploration, holes in concrete structure, river levees, civil water wells and ground temperature central air-conditioner.
2. Features of HZ-200YY hydraulic core drilling rig
·the highest speed can reach 1045r/min with 5 gears, which improves drilling efficiency
·adopted 53*59 drilling rod, which has high rigidity and strong delivery torque.
·equipped with taper clutch, made the machine easy to operate and free of maintenance.
·using large module planetary gear and adding supporting frame, which highly increased hoisting and braking ability of the winch.
·vertical spindle are fixed by four groups of bearings to ensure that the core drilling rig is rigid enough for gravel layer and other complex geological conditions.
3. Technical parameters of HZ-200YY hydraulic core drilling rig
Max open hole diameter 300mm
End hole diameter 75mm
Drill rod diameter 60mm
Drilling angle 90
Drill weight (without power) 975kg
Triangle conveyer belt B950 * 4; B1700 * 3
Main drilling rig moving distance 300mm
Power Diesel engine 22HP
Electric motor 15kw
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Hoist
Max. lifting capacity 2400kg
Single line lifting speed 0.41/0.82/1.64 m/s
Wire rope diameter 13mm
Wire rope length 35m
Reel diameter 140mm
Hug floodgate diameter 260mm
Hug floodgate belt width 70mm
Mud pump
Type Horizontal single-urn twin-action
Displacement Diesel engine 170L/min
Electric motor 150L/min
Maximum pressure 3mpa
Work pressure 1.5mpa
Inlet pipe diameter 40mm
Outlet pipe diameter 30mm
Triangle conveyer belt B1728mm
1. Applications of XY-180 hydraulic core drilling rig
The XY-180 hydraulic core drilling rig is designed on the basis of the XY-1A hydraulic core drilling rig. It is a low speed and high torque portable drilling machine with oil pressure.
This drill rig is suitable for engineering geological survey of railway, hydropower, traffic, bridge, dam foundation and other buildings, geological core drilling and physical investigation, drilling holes for small holes and blasting holes, a small water well drilled.
3.Parameters of XY-180 hydraulic core drilling rig
Drilling depth 180/150/120/90/70/30
75/91/110/130/150/300
Maximum opening diameter 375
Drill pipe diameter 42/50
Spindle speed (r/min) 71/142/310/620
Spindle stroke 450
Upgrading ability (KN) 15
Diameter of steel wire 12
Type gear pump
Model YBC-12/80
Rated pressure (MPa) 8
Rated speed (r/m) 1500
Displacement 8
Power supply ZS1115 diesel engine and 15kw motor
1. Features of XY-3 hydraulic core drilling rig
·XY-3 hydraulic core drilling rig adopts CG140 model auto transmission, has 10 rotation speeds and reasonable speed range, with eight forward rotation gears and two reverse rotation gears, high speed, strong stroke and wide scope of application
·Large torque, strong bearing capacity, can realize long distance control speed change, operation centralized and convenient
·Large engine power and two reverse rotation gears, can easily solve the water well drilling work accident.
·Equipped with normally closed hydraulic chuck, operation is flexible and reliable
·The independent operation of the vertical shaft and the hoist can be realized
·The diameter of the vertical shaft through the hole is large and can be replaced with a large six party active drill rod
2. Parameters of XY-3 hydraulic core drilling rig
XY-3 hydraulic core drilling rig
Drilling depth 600m
Borehole diameter 300-75mm
Max open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60
Drilling angle 90°-65°
Spindle
spindle speed 30-1050r/min
Spindle stroke 29-137r/min
Spindle stroke 60mm
Spindle inner diameter 96mm
Lifting capacity 6000kg
Hoist
Max.single line lifting speed 0.5-1.9m/s
Wire rope caliber 12.5mm
Max.single line lifting capacity 4000kg
Reel diameter 300mm
Wire rope length 50m
Maximum lifting capacity of single rope 3000kg
Mud pump
Type Horizontal three cylinder BW-250
Displacement 250l/min
Work pressure 80kg/cm²
Water inlet pipe diameter 75mm
Water outlet pipe diameter 50mm
Gear oil pump
Duplex gear oil pump CBF-F63/25
Front displacement, pressure 63l/min 20mpa
Water outlet pipe diameter 25l/min 20mpa
Power
Diesel engine 39kw
Electric machinery 22kw
Weight size
Drill weight 1800kg
Shape size 2500*900*1800mm
1.Brief introduction of QZ-2B gasoline engine sampling drilling rig
QZ-2B gasoline engine sampling drilling rig is produced by Shandong Master Machinery Group Co.,Ltd. It is suitable for geological industrial and civil buildings, bridges, railway, highway, hydro-power industry survey, geophysical exploration, advanced drilling and grouting hole drilling, embedded hole guiding, broken hole, hole and small household wells check out.
QZ-2B gasoline engine sampling drilling rig has the following features: compact structure, small volume, light weight, two gears, easy to move.
2. Technical parameters of QZ-2B gasoline engine sampling drilling rig
QZ-2B gasoline engine sampling drilling rig
Bottom hole diameter (mm) 32-91
Drilling depthm soil 9110-15m
stone915-10m
stone7510-15m
stone6015-20m
stone4620-25m
Drilling pipe (mm) 28
Rotating speedr/min 200-570
Torquen.m 110
Gasoline engine house power(hp 5 (3.5kw)
displacementcc 196
Dimensionl*w*h 600*450*1900
Weightkg 90
3.Configuration list of QZ-2B gasoline engine sampling drilling rig
Item Parameter Unit Quantity
Gasoline engine sampling drilling rig QZ-2B set 1
Drilling pipe 28*1500 pc 6
Drilling pipe 28*800 pc 8
Pipe joint 35 pc 14
Reducing nipple 45/35 pc 1
Core barrel 45*800 pc 1
Alloy bit 46 pc 1
Reducing nipple 58/35 pc 1
Core barrel 58*800 pc 1
Alloy bit 60 pc 1
Three-wing bit 60 pc 1
Safety clamp hold 1
Water seal 30*50*10 pc 4
Oil seal 30*50*10
Oil seal 17*50*10
Control wheel pc 1
1.Brief introduction of QZ-2A three phase electric sampling drilling rig
QZ-2A is a three phase electric sampling drilling rig , produced by Shandong Master Machinery Group Co.,Ltd. It is suitable for industrial and civil buildings, bridges, railways, roads, utilities and other sectors of the geological exploration.
2. Technical parameters of QZ-2A three phase electric sampling drilling rig
QZ-2A three phase electric sampling drilling rig
Borehole diameter (mm) 32-91
Drilling depthm soil9110-15m
stone915-10m
stone7510-15m
stone6015-20m
stone4620-25m
Drilling pipe diameter (mm) 28
Rotate speedr/min 185-380
Torquen.m 80
Powerkw 3
Dimensionl*w*h 600*450*1900
Weightkg 95
3. Configuration list of QZ-2A three phase electric sampling drilling rig
Item Parameter Unit Quantity
Three phase electric sampling drilling rig QZ-2A platform 1
Drilling pipe 28*1500 pc 6
Drilling pipe 28*800 pc 8
Drilling joint 35 pc 14
Reducing nipple 45/35 pc 1
Core barrel 45*800 pc 1
Alloy bit 46 pc 1
Reducing nipple 58/35 pc 1
Core barrel 58*800 pc 1
Alloy bit 60 pc 1
Three-wing bit 0 pc 1
Safety clamp hold 1
Water seal Y30*50*10 pc 4
Oil seal 17*50*10 pc 2
Control wheel set 1
1. Purpose of HZQ-20 gasoline engine concrete core drilling rig
HZQ-20 gasoline engine concrete core drilling rig adopts high-speed cutting technology and is matched with thin-walled diamond drills. It is widely used in drilling and coring in engineering construction, municipal engineering, equipment installation engineering and building quality inspection. On the concrete, asphalt pavement and limestone roads such as highways, airports, ports and dams, the cores are subjected to compression and flexural tests. The coring and open hole is used to drill anchor bolt hole for large-scale machine equipment, and bridge handrails and traffic safety protection.
2. Features of HZQ-20 gasoline engine concrete core drilling rig
Double column structure and spiral feeding mode are adopted with good stability and simple operation and labor saving. The rig is equipped with wheel, which is easy to move.
The use of high-speed cutting technology and thin-wall diamond drill supporting can drill and cut high strength reinforced concrete with high drilling efficiency, accurate hole location, hole wall smooth, good hole quality, complete core smooth, small vibration, no damage to the building.
3.Parameters of HZQ-20 gasoline engine concrete core drilling rig
·Drilling diameter: 200mm (if larger hole size is needed, please specify)
·Drilling depth: 700mm (greater depth can be drilled with connecting rod or extended mandrel)
·Engine: gasoline engine
·Power: 5.5 HP, 9.0 HP, 13 HP and 20 HP
·Output speed: 800-1500 RPM
·Weight: 180KG
Shandong Master Machinery Group specializes in the supplying of concrete drilling and coring machine. The main models are HZQ-20 gasoline engine concrete core drilling rig, HZC-20 diesel engine concrete core drilling rig, HZQ-20T towed concrete core drilling rig.
1.Brief introductions of QZ-1A two phase electric sampling drilling rig
QZ-1A is a two phase electric sampling drilling rig produced by Shandong Master Machinery Group Co.,Ltd. It is suitable for all kinds of geological exploration, like industrial and civil buildings, bridges, railways, roads and so on. QZ-1A two phase electric sampling drilling rig is only 80kg; height is less than 2 meters, and the drilling rig can been break down structure. Hence it is easy to move and operated.
2.Technical parameter s of QZ-1A two phase electric sampling drilling rig
QZ-1A two phase electric sampling drilling rig
Borehole diameter (mm) 32-46
Drilling depth (m) Soil layer: 20-25
Lithosphere: 15-20
Drilling pipe diameter (mm) 25
Rotate speedï¼?r/minï¼? 175
Torque (n.m) 80
Power (kw) 1.5
Dimensions (l*w*h) 600mm*450mm*1900mm
Weight (kg) 80
3.Configuration list of QZ-1A two phase electric sampling drilling rig
Item Parameters Unit Quantity
Two phase electric sampling drilling rig QZ-1A set 1
Drill pipe(mm) 25*1500 pc 6
Drill pipe(mm) 25*800 pc 8
Joint(mm) 32 pc 14
Core barrel(mm) 32*800 pc 1
Alloy bit(mm) 32 pc 1
Reducing nipple(mm) 45/32 pc 1
Core barrel(mm) 45*800 pc 1
Alloy bit(mm) 46 pc 1
Three-wing bit(mm) 60 pc 1
Safety clamp pc 1
Water seal Y Type 30*45*8 pc 4
Control wheel set 1
2. Product Description:
Drill pipe slip is a kind of handling tools specially used to handle drill pipe during the oil well drilling operations for the exploration of petroleum and natural gas. It is an essential tool for coupling and uncoupling.
There are three types of DU series Rotary Slips: DU, DUL and SDU. They are with large handling range and light weight. There into, SDU slips have larger contacting areas on the taper and higher resistance strength. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment.
3. Features:
(1). Suitable for shallow hole drilling, medium depth drilling and deep drilling.
(2). 100% customer satisfaction for quality and reliability.
(3). After machining all slips undergo 100% inspection.
(4). Different types for clients choice for different depth well and different size drill pipe.
1. Main Technical Parameters:
(1). Model: DCS-S. Drill Collar O.D. (in): 3-4. Drill Collar O.D. (mm): 76.2-101.6.
Weight (kg): 51. Weight (lb): 112. Use in Insert Bowl No.: API or No. 3.
(2). Model: DCS-S. Drill Collar O.D. (in): 4-4 7/8. Drill Collar O.D. (mm): 101.6-123.8.
Weight (kg): 47. Weight (lb): 103. Use in Insert Bowl No.: API or No. 3.
(3). Model: DCS-R. Drill Collar O.D. (in): 4 1/2-6. Drill Collar O.D. (mm): 114.3-152.4.
Weight (kg): 54. Weight (lb): 120. Use in Insert Bowl No.: API or No. 3.
(4). Model: DCS-R. Drill Collar O.D. (in): 5 1/2-7. Drill Collar O.D. (mm): 139.7-177.8.
Weight (kg): 51. Weight (lb): 112. Use in Insert Bowl No.: API or No. 3.
(5). Model: DCS-L. Drill Collar O.D. (in): 6 3/4-8 1/4. Drill Collar O.D. (mm): 171.4-209.6.
Weight (kg): 70. Weight (lb): 154. Use in Insert Bowl No.: API or No. 3.
(6). Model: DCS-L. Drill Collar O.D. (in): 8-9 1/2. Drill Collar O.D. (mm): 203.2-241.3.
Weight (kg): 78. Weight (lb): 173. Use in Insert Bowl No.: API or No. 3.
(7). Model: DCS-L. Drill Collar O.D. (in): 8 1/2-10. Drill Collar O.D. (mm): 215.9-254.
Weight (kg): 84. Weight (lb): 185. Use in Insert Bowl No.: No. 2.
(8). Model: DCS-L. Drill Collar O.D. (in): 9 1/4-11 1/4. Drill Collar O.D. (mm): 235-285.7.
Weight (kg): 90. Weight (lb): 198. Use in Insert Bowl No.: No. 2.
(9). Model: DCS-L. Drill Collar O.D. (in): 11-12 3/4. Drill Collar O.D. (mm): 279.4-323.9.
Weight (kg): 116. Weight (lb): 256. Use in Insert Bowl No.: No. 1.
(10). Model: DCS-L. Drill Collar O.D. (in): 12-14. Drill Collar O.D. (mm): 304.8-355.6.
Weight (kg): 107. Weight (lb): 237. Use in Insert Bowl No.: No. 1.
2. Product Description:
Drill Collar Slips are specially developed to handle drill collars during well drilling.
There are three types of DCS Drill Collar Slips: S, R, and L. They can accommodate drill collars from 3 in (76.2 mm) to 14 in (355.6 mm) O.D.. The handling sizes can be adjusted by changing the quantity of inserts or slip body. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment.
3. Features:
(1). Multi-segments design make it possible to handle different size drill collars by adjusting the quantity of inserts or slip body.
(2). 100% customer satisfaction for quality and reliability.
(3). After machining all slips undergo 100% inspection.
(4). Different types for clients choice for different depth well and different size drill pipe.
1. Main Technical Parameters:
(1). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 3-4 1/2.
Drill Collar O.D. (mm): 76.2-114.3. Use in Insert Bowl No.: API or No. 3.
(2). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 3 1/4-4 3/4.
Drill Collar O.D. (mm): 82.55-120.65. Use in Insert Bowl No.: API or No. 3.
(3). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 4 1/4-5 3/4.
Drill Collar O.D. (mm): 107.95-146.05. Use in Insert Bowl No.: API or No. 3.
(4). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 5 1/2-7.
Drill Collar O.D. (mm): 139.7-177.8. Use in Insert Bowl No.: API or No. 3.
(5). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 6 3/4-8 1/4.
Drill Collar O.D. (mm): 171.5-209.55. Use in Insert Bowl No.: API or No. 3.
(6). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 8 1/4-10.
Drill Collar O.D. (mm): 209.55-254. Use in Insert Bowl No.: No. 2.
(7). Model: Drill Collar Slips Type A. Drill Collar O.D. (in): 10-11 3/4.
Drill Collar O.D. (mm): 254-298.45. Use in Insert Bowl No.: No. 2.
2. Product Description:
Drill Collar Slips are specially developed to handle drill collars during well drilling.
Drill Collar Slips Type A are multi-segments slips. They can accommodate the changes of outer diameter after abrasion of drill collar. They are with light weight, large handling scale and reliable quality. This kind of slips are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment.
3. Features:
(1). Multi-segments design make it possible to handle different size drill collars by adjusting the quantity of inserts or slip body.
(2). 100% customer satisfaction for quality and reliability.
(3). After machining all slips undergo 100% inspection.
(4). Different types for clients choice for different depth well and different size drill pipe.
4. Material: Carbon Steel.
5. Processing Type: Forging.
6. Machine Type: Drilling Tool.
7. Use: Well Drilling.
8. FAQ:
Why you need to choose Lake Petro?
As a professional oil and gas service company, Lake Petro has many good experience in selling and serves for the oilfield industries for years. Quality is the culture of the company, we provide API and BV certified products for customer.
Can you make us the best quality products as well as a good price?
Yes, we can give you really high quality products with competitive price. We have a better understanding in Chinese market, with us your money will be safe.
What is special compare with other companies?
First, we provide the quality products, with BV and API certified; At the same time, we provide our customer with the best service after sale, any time any where.
5726 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
