Helical, Burnishing
Drills are designed to work with hard metal materials such as steel, castiron, and sus.
Even without a guide Bush or center Drilling there is good precision and intensity of illumination.
The Ultra-fine endmills perform well on hard metal material such as high hardned materials and sus.
SJ guide best solution of machining condition with supreme post treatment.
Drawings are provided that pertain to carbide grade, structural shape, working condition for SA, milling cutter, differentiated product.
SJ Reamers are made with strict quality management, inspection and measurement. Accurate tolerance and precision are quaranteed regarding the holes that customers want to be bore.
The reamer for machining difficult-to-cut materials(heat treated steel, soft casting, etc..).
Good illumination and reasonable price.
The grinder mill is suitable for grinding all kinds of mineral and metal material or construction/matal waste into ultrafine powder (80-500 mesh) , such as clinker, slag, gold, limestone, calcium carbonate, coal, etc.
Capacity from 5-50 t/h
We also provide free and professional customize, remould or design the system according to your demand.
Wearing parts supply and technical support are always 27/7 for you
5726 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
Raymond Mill is mainly applied to the powder processing of mineral products in industries of metallurgy, construction, chemistry, and mining etc. It can produce powder from more than 280 kinds of non-flammable and non-explosive mineral materials with Mohs hardness below 7 and humidity below 6%, such as barite, limestone, quartz, calcite, granite, porcelain clay, basalt, gypsum etc. The final size is between 613micron and 440 micron (0.613mmâ??0.044mm). 2-22t/h We also provide free and professional customize, remould or design the system according to your demand.
Wearing parts supply and technical support are always 27/7 for you
Coupling sleeves manufacturers india, coupling sleeves, other name is coupling, when using rock drills with male shank adapters and a conventional drifter rod, a coupling is required to join the adapter to the rod, ensuring the ends touch for efficient energy transmission. Coupling sleeves are also used to connect several rods to each other in the same way. Couplings sleeves have a middle stop to prevent over-threading on to the drill rod.
Shank adapters are manufactured from specially selected alloy steels followed by heat treatment through carbonizing which withstands the high impact power of drilling. This product line has been recently introduced by mindrill and the quality is highly appreciated by the end users. Presently we maintain stock of few selected fast moving categories but we can undertake manufacturing of the same as per customers requirement, if quantity permits.
DTH Hammer Button bits are available with different head configurations to suit changing drilling condition and rock characteristics. Bits are generally fitted hemispherical or round tungsten carbide inserts but parabolic or ballistic inserts are available on many sizes. Alternatively, a combination of Hemispherical and parabolic inserts can be fitted. Button Bits are produced in a wide range of sizes to suit most popular type of Down Hole Hammers
Create arcs and circles are important process in part or tool fabrication, with addition of rotary tables to greater capacity to produce more profitable parts, less time and greater accuracy in cutting.
Input voltage: 220v
Output power: 90w
Spindle speed: 40000r / min
Dimensions: 210 * 70 * 80mm
Weight: 5kg
Function: adjustable speed carving machine is a kind of electronic control speed engraving machine. The machine handle is strong and used common machine chuck, the replacement of different chucks, you can use different models and different rods of the tool needle which is easy to use and strong versatility. The machine speed can be used according to the stepless speed regulation, combined with the advantages of electronic gong machine and gong machine, to avoid the same gong machine with the same replacement of the hose, but also to avoid the electronic gong machine can only use small rod tool shortcomings.
We are professional manufacturer of carbide milling inserts.
1. Various grade and size is available.
2. High quality with competitive price.
3. Small orders are welcome.
4. We can produce milling inserts according to your drawings or samples.
Voltageï¼?220V
output power ï¼?750W
speed of mainshaft ï¼?1400r/min
Function:This machine is mainly used for soft stone material of processing and polishing, such as amber, jade, green gold, etc.,
This machine is using a small flat, suitable ditch sieve plate for faster processing products and not easy deformation which has high yield, the product effect is good.
The input voltage: 380 v / 220 v
Output power: 1.5 kw / 1.1 kw
The spindle speed: 1400 r/min
Installation dimensions: 92 * 50 * 92 cm
Function:this machine uses much higher chamfering barrels and its single motor with double barrel. Its processing quantity is much which saves electricity.
The machine uses high quality bearing, smooth operation, long service life.Apply to factory mass production.
High Efficient Rock Drill
Product Description
Parameters Unit Parameter value
Weight Kg 26
Rated pressure Mpa 0.5
Impact frequency Hz 35
Gas consumption L/s 81
Drilling speed mm/min 350
Noise dB (A) 126
Operating water pressure Mpa 0.3
Diameter of shank mm H22*108
Diameter of borehole mm 34~42
Our Service
Pre-sales Service:
The wide product range enables us to provide our customers with individual machines or complete processing plants.Based on our customers'request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order.
After-sales Service:
Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customers'plants.Necessary training about machine daily maintenance to local workers is provided also.
Methods of Payment:
T/T (Telegraphic Transfer) or Western Union or L/C at sight
Handling time for an order:
Within 10 days supplied from stock
Shipping method:
Sample order: we suggest Courier express like DHL/UPS/TNT/FedEx or by air
Bulk order: we suggest by air or by sea.
Quality Control:
We have our own experienced QC.
There will be strict inspection and testing for every order before shipping out.
5. After Services:
a. Our sales team will response for your question within 24 hours (Holidays Excluded)
b. Technical Support will be available in any time
c. Free replacement will provide once the failure confirmed caused by our product quality
Drilling cap. C. I. 32
Tapping in M. S. 12
Spindle center to col. 670
Spindle travel 145
Spindle nose to base 650
Dia. of column 130
Dia. of RAM 72
Size of table 290 x 235 x 235
Overall base size 930 x 635
No. of spindle speed (8 speed) 105 to 2650 RPM
Taper in spindle base MT-3
Machine area of base 660 x 500
Drill motor (gear drive) 1 HP & 0.5 HP
Total height 1425
V-Belt size A-23, B-50
Net Weight 450 Kgs
Drilling cap. In Steel 25
Drilling cap. C. I. 32
Tapping in M. S. 12
Spindle center to col. 205
Spindle travel 145
Dia. of column 90
Dia. of RAM 72
Size of table 250 x 460
No. of spindle speed (8 speed) 105 to 2650 RPM
Taper in spindle base MT-3
Drill Motor (gear drive) 1 HP
Total height 1425
V-Belt size B-49
Longitudinal Travel 400
Cross Travel 206
Net Weight 400 Kgs
SPECIFICATION : SJR 40 F
Drilling cap. In Steel 40
Drilling cap. C. I. 45
Tapping in M. S. 20
Spindle center to col. 890 / 387
Spindle travel 235
Spindle nose to base 900 / 185
Dia. of column 165
Dia. of RAM 72
Size of table 380 x 280 x 275
Overall base size 1270 x745 x200
No. of spindle speed (8 speed) 90 to 2630 RPM
Taper in spindle base MT-4
Machine area of base 1200 x 605
Drill motor (gear drive) 1.5 HP & 1 HP
Total height 1900
V-Belt size A-24, B-47
Drilling cap. In Steel 38
Drilling cap. C. I. 45
Tapping in M. S. 15
Spindle center to col. 320
Spindle travel 240
Spindle nose to base 1000
Dia. of column 121
Dia. of RAM 72
Size of Sq. Table 375 x 475
Overall base size 720 x 470
No. of spindle speed (8 speed) 90 to 2630
Taper in spindle base MT-3
Machine area of base 485 x 445
Drill motor (gear drive) 1.5 HP 1440 RPM
Total height of machine 1800
V-Belt size B-58
Net Weight
325 Kgs.
Drilling cap. In Steel 25
Drilling cap. C. I. 32
Tapping in M. S. 12
Spindle center to col. 230
Spindle travel 145
Spindle nose to base 1000
Dia. of column 90
Dia. of RAM 72
Size of Round Table 365
Overall base size 570 x 345
No. of spindle speed (8 speed) 105 to 2650
Taper in spindle base MT-3
Machine area of base 260 x 350
Drill motor (gear drive) 1 HP 1440 RPM
Total height of machine 1625
V-Belt size B-49
Net Weight
200 Kgs.
