21 PC 1/2 Hammer
Voltage:110v/240v
Input:450W,500W,550W,600W,650W,700W
No-Load Speed:0-2800 rpm or Two speed:2200-2800rpm
Capacity for Steel:10 mm
Concrete:13 mm
Wood:20 mm
Impact times:38400/min, reversible, Belt hook with level.
Accessories:
1 Blow Mold Case
5 Masonry Drill Bits w/1 each of sizes 4,5,6,8& 10 mm.
9 Steel Drill Bits w/1 each of sizes 2,3,3.5,4,4.5,5,6,7,& 8 mm.
5 Assorted Mounted Stones
1 Depth Gauge
Outer Carton dimensions: 48 x 37 x 29.5cm, QTY:6 pcs/ctn
3240sets/20ft container; 7800sets/40ft HQ
Drill bit
1.This drill comes with the finest imported carbide tip which is very efficient in carring out various tough drilling process.
2. This comes in various nad length eg: from 3/16 to 3/8 length 49 mm to 12 inch.
3.This comes with full replacement garantee.
We supply Anti Vibration Machine Pads, Round Levelling Mounts, Precision Wedge Mounts, Base Mounts and special tailor made mounts for special applications as per sample or drawings
Our Products are manufactured using materials such as Nitrile Rubber, Cork articles, Chemicals, and High Grade Castings & Fasteners. Our product range covers a wide range of applications from Forging Hammer to Air Compressor.
PD1000-STG5 Model PILE DRIVER MACHINE TECHNICAL DETAILS
Motor Yanmar STG-V Motor
Hammer power 1000 Joule
Number of blows/min 440-880 bpm
Hammer weight 485 kg
Oil tank capacity 150 L
Oil pressure 180 Bar
Fuel tank capacity 50 L
Max. pile length 4500 mm
Total weight 4500 kg
Column inclination +15 �° / - 65 �°
Lateral inclination +15 �°/ -15 �°
STANDARD EQUIPMENTS
Lightening
Radiator water level sensor
Hydraulic oil level sensor
Hydraulic oil temperature sensor
Safety valves
Hydraulic oil cooler radiator
Hydraulic pump
90 liter tool kit
Digital display
OPTIONAL EQUIPMENTS
DTH / Rock drilling
Auger
Automatic levelling
Remote control system
GPS
Post extraction apparatus
Post mold according to post section
PD1000-STG3 Model PILE DRIVER MACHINE TECHNICAL DETAILS
Motor Yanmar STG-III Motor
Hammer power 1000 Joule
Number of blows/min 440-880 bpm
Hammer weight 485 kg
Oil tank capacity 150 L
Oil pressure 180 Bar
Fuel tank capacity 50 L
Max. pile length 4500 mm
Total weight 4500 kg
Column inclination +15 �° / - 65 �°
Lateral inclination +15 �°/ -15 �°
STANDARD EQUIPMENTS
Lightening
Radiator water level sensor
Hydraulic oil level sensor
Hydraulic oil temperature sensor
Safety valves
Hydraulic oil cooler radiator
Hydraulic pump
90 liter tool kit
OPTIONAL EQUIPMENTS
DTH / Rock drilling
Auger
Automatic levelling
Remote control system
GPS
Post extraction apparatus
Post mold according to post section
Drilling cap. In Steel 40mm
Drilling cap. C. I. 45mm
Tapping in M. S. 30mm
Spindle center to col. 890 / 387 mm
Spindle travel 235 mm
Spindle nose to base 900 / 185 mm
Dia. of column 165 mm
Dia. of RAM 72 mm
Size of table 380 x 280 x 275 mm
Overall base size 1270 x 745 x 200 mm
No. of spindle speed (8 speed) 90 to 2630 RPM
Taper in spindle base MT-4
Machine area of base 1200 x 605 mm
Drill motor (gear drive) 1.5 HP & 1 HP
Total height 1900
V-Belt size A-24, B-46
Net Weight 890 Kgs
SPECIFICATION : VMT 38
Drilling cap. In Steel 38 MM
Drilling cap. C. I. 45 MM
Tapping in M. S. 20 MM
Spindle center to col. 320 MM
Spindle travel 240 MM
Spindle nose to base 1000 MM
Dia. of column 120 MM
Dia. of RAM 72 MM
Size of Sq. Table 375 x 475 MM
Overall base size 720 x 470 MM
No. of spindle speed (8 speed) 90 to 2630
Taper in spindle base MT-3
Machine area of base 485 x 445 MM
Drill motor (gear drive) 1.5 HP 1440 RPM
Total height of machine 1800
V-Belt size B-58
Net Weight 325 Kgs.
Orchid Energy could supply slick type drill collar, spiral drill collar and Non-magnetic drill collar (NMDC).
Orchid Energy can provide three types of Non Magnetic Drill Collar: Non Magnetic Slick Drill Collar, Non Magnetic Spiral Drill Collar, Non Magnetic Flex Drill Collar, Pony Collar.(P530,P550 material etc)
Non Magnetic Drill Collar (NMDC) are made from low-carbon stainless steel as API specification and implementation of SY/T5144 standard, which can be cold thread rolling, machine special double shoulder thread and do as other specifications request. Non Magnetic Drill Collar are as a housing for MWD tools and also could provide weight for drill string.
Test and Inspection carried out on each bar: Chemical Composition, Tensile Test, Impact Test, Hardness Test, Metallographic Test, Corrosion Test, Ultrasonic Test over the whole length of the bar, Relative magnetic permeability Test, Hot spot Test, Dimensional Inspection.
Slick/Spiral Drill collar is produced by AISI 4145H modified quenched and tempered steel as API specification and implementation of SY / T5144 standard, which can be cold thread rolling, copper or phosphate processing, machine special double shoulder thread and other specifications.
Slick/Spiral Drill collarFeatures & Benefits:
Pressed steel thread protectors are supplied for drill collar;
Stress relief groove & bore back Box applied if needed;
Hardbanding material ARNCO 100XT,ARNCO 300XT,TCS8000 applied if needed;
Slip and elevator recess are machined in accordance with API7-1;
The Universal Bottom Hole Orientation (UBHO) Sub is used in a directional drilling BHA, and it is manufactured from high quality AISI 4145-modified fully heat-treated alloy steel or non-magnetic material like P530, P550 to provide a non-magnetic environment for drill string.
The UBHO sub is often referred to as a mule shoe sub. This tool is typically run directly below a drill collar and contains a landing sleeve for directional survey equipment. The UBHO is designed and used to establish the â??high side of the toolâ??, which is essential for knowing the tools orientation in the wellbore.
UBHO also stands for:
Universal Bent Sub Orientation;
Universal Bottom Hole Orientation;
Universal Bore Hole Orientation;
Various OD sizes are available to meet specific directional drilling applications.
LT overshot is one of the fishing tools which is fishing the pipes externally. It can catch drill collar, drill pipe, tubing, subs and other pipes. Because of the seals, the fluid can circulate with the high pump pressure after catching the fish. The top of the fish will be milled by under mill shoe.
The releasing and circulating overshot can also work with jars to catch the stuck fishes. If the catched fish canâ??t be release from stucking ,we could release the overshot and lifting the drill string.
Overshot consists of three outside parts: top sub, bowl, and standard guide. The basic overshot may be dressed with either of two sets of internal parts, if the fish diameter is near the maximum catch of the overshot, a spiral grapple, spiral grapple control, and type â??Aâ?? packer are used. If the fish diameter is considerably below maximum catch size (�½â?? or more) a basket grapple and a mill control packer are used.
Orchid Energy drilling motors, also known as mud motors, have established a reputation for performance, reliability and excellent service. We provide a versatile range size and types of motors for directional, horizontal, straight drilling, performance drilling, coil tubing and HDD drilling conditions.
Drilling motors are the key component of bottom hole assembly(BHA), providing efficient and precise drilling operations. These high-performance motors, generate rotational force to drive the drill bit. With advanced technology and superior design, drilling motors offer enhanced torque, speed, and reliability.
Drilling motor is a positive displacement motor(PDM). The high drilling fluid enters into the motor converting high fluid power to mechanical energy and the rotor drives the shaft and bit rotating. We can produce drilling motors for hole size from 1 7/8â?? to 26". We also can design and manufacture according to customers' special requirements.
Classification
1) Bent Housing Motor
We can provide fixed bend motor, single bend motor, double bend motor and adjustable bend housing motors.(adjustable angle from 0-3�°) which can meet different kickoff requirement.
2) High Temperature Motor
Drilling motor Temp. range are â?¤120â??,120-150â?? and 150-175â??which can meet different well running condition even in very harshest environment.
3) Hollow Rotor Motor
To increase hydraulic horsepower and upward speed of mud stream, rotor is manufactured into hollow rotor with nozzles. Thus, motor total flow rate is equal to the sum of the flow rate through seal cavity and rotor.
4) Even Wall Motor
Even wall motor not only enhances the impact resistance and deformation resistance of the rubber on the inner surface of the stator housing, but also the rubber will not cause problems such as rubber aging and rubber drop during the vulcanization process, so that the rubber vulcanization effect can be achieved better to ensure the service life of drilling motor. Under the same pressure drop, the size of the motor can be shortened and mud motor kick off rate can be further improved.
5) Rotor Coating Technology
Regular chrome coating could be adopted as clients requirement. Also we can do Tungsten carbide coating on rotor surface which can enable the rotor to work normally in saturated saltwater mud and to prevent the corrosion of chrome plated rotor in saturated saltwater.
Benefits & Features
All drilling Motors are equipped with a rotor catch sub;
Drilling Motors can be equipped with float top sub or dump sub or special catch sub;
Drilling motor can be used in WBM(water based mud)&OBM(oil based mud);
Equipped with 0 â?? 3�° Adjustable Housings;
Screw on Stabilizer's available or fixed Stabilizer or blank stabilizer;
Stronger bearing mandrel for use with high torque power sections;
Hydraulic Mechanical Drilling Jar is integrate hydraulic principle with mechanical principle and applies to all kinds of drilling operations and be used through combining with drilling tools. This jar is equipped with a mechanical safety latch and mechanical latch for jarring downwards.
When the downhole tools get struck, the hydraulic mechanical drilling jar can generate upward jarring or downward jarring through lifting and landing drilling strings, and release block and stuck by several times jarring to recover normal drilling operation promptly. Avoiding resistance and stuck which may cause further accident and caused greater economic loss. If releasing force is failed, it can dynamically adjust at any time on sites.
Hydraulic jar is one of the drilling jars types used in drilling operations to free stuck pipe problem.
Orchid Energy hydraulic drilling jar will allow the operator to apply variable impact in both the up and down directions. It can protect the drill string effectively and improve the using life. The hydraulic stored energy mechanism has the advantage of reliable property and good stability. The scope of time delay interval can be 30s 240s; the scope of service temperature can be -40 180. It can adopt the new special material for higher property and safety. It can normally used for drilling, coring, work over and fishing etc.
5826 Drilling Machines Tools Suppliers
Short on time? Let Drilling Machines Tools sellers contact you.
