Impact Drill ID850 Voltage/Freqency: 220-240V~ 50Hz, Input power: 850W No-load speed:0-2800/min Chuck size:13mm, Max Drilling capacity: steel: 10mm concrete: 13mm wood: 25mm 1. Ideal for drilling brick and concrete. 2. Grip design for better balance and control. 3. Includes side handle and depth rod. 4. Powerful and compact to handle tough tasks in tight spaces.
Electric Drill HD350 Voltage/Freqency: 220-240V~ 50Hz, Input power 350W No-load speed:0-3000/min Chuck size:6.5mm, Maximum torque:15Nm Max Drilling capacity: steel: 10mm wood: 20mm 1. 0.8-6.5mm chuck. 2. Buckle design for aloft work. 3. Valiable and revrse switch. 4. Soft grip for comfortable holding. 5. Drill & screwdriver fuction.
Electric Drill HD500A Voltage/Freqency: 220-240V~ 50Hz, Input power 500W No-load speed:0-3000/min Chuck size:10mm, Max Drilling capacity: steel: 10mm wood: 20mm 1. 0.8-10mm chuck. 2. Buckle design for aloft work. 3. Valiable and revrse switch. 4. Soft grip for comfortable holding. 5. Drill & screwdriver fuction.
The PDTHR-200 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The DTHR-200 rigs flexibility means it can be mounted on single truck version, two truck versions and on local truck matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling Optional: Skid mounting Key features: Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement All the actuators are operated by proportional control valves Drill rod handling :10 feet (3.0 meter) - 15 feet (4.5 meter) Drilling depth : 650 feet (200 meters) Drilling diameter : 4.5 inch (114 mm) - 8 inch (203 mm) Pull up force : 5,000 kgf Drill head torque: 255 kg.m Air compressor : 1100 cfm/300 psi Mud pump : 300 lpm - 500 lpm Carrier : Truck(Optional: Skid)
Technical Specifications: Prime Mover: SKID Make : PRL Model : SKID Engine Rating : 180hp @ 2200Rpm Air Compressor Make : ELGI / Atlas Copco Model : 1100/300 CFM : 1100 PSI : 300 (20.8 Bar) Drill Depth Maximum Depth : 300Meters(1000Feet) Rod Handling : 4.5 inch(15Feet) Hole Diameter DTH : 152 254mm(6"- 10") Rotary: 152 350mm(6-14) Mud Pump Make : G&P/ Lakshmi Model : 6X6 Stroke : 150mm Liner Size : 150mm Mast Max Capacity : 18 tons (39600 lbs) Height : 8.0 mtr (27 ft) Rod handling capacity: 6.0 mtr (20 ft)
Brief description: The PDTHR-600 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-600 rig's flexibility means it can be mounted on two truck versions and on local trucks matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling Optional: Skid mounting Key features: Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement All the actuators are operated by proportional control valves Key specification: 1.Drill HOle Diameter : Dia 8" DTH/ 12 1/4" Rotary 2.Depth : 600 Mtr Optional 3.Carrier : Ashok LeylandTruck (6x4 Wheel Drive) 4.Air Compressor : 1200 cfm @ 350 psi 5.Mud Pump : 765 lpm @ 16 Bar 6.Application : Water Well 7.Optional : Skid/Two truck version
Description: The PCDR-150 drill rig is ideal for Soil testing drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PCDR-150 rigs flexibility means it will be mounted on tractor and (Rig can be mounted on two wheel or four wheel tractor upon customer request) Optional: Multipurpose drill rig (Core, DTH, Mud rotary) Key features: Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement Drill rod handling : 10 feet (3.0 meter) Drilling depth: up to 500 feet (150 meters) Drilling diameter: NQ-HQ Pull up force:5000 kgf Drill head torque : 40 kg.m 70 kg.m Carrier : Tractor(Optional: Truck) Optional : Crawler/Skid/Trolley
Technical Specifications of PDTHR 450 AMW Drill Rig Machine: Depth of the Bore hole - 450 Meters Diameter of the Bore Hole - 10(204 mm) by DTH Method 12 ¼(310 mm) by Rotary method. Application - Hard Rock / Soft Soil / Alluvial Formations. Rig Carrier - AMW Make 2523 Model truck with Engine Capacity 230hp @ 2400RPM and 25 Tons Gross Vehicle Weight. Compressor - ELGI/Atlas Copco Make 1200 CFM @ 350 PSI Mud Pump - Hydraulic Driven Screw Type Mud Pump
Brief description: The PDTHR-350 Star drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-350 rig's flexibility means it can be mounted on two truck versions and on local trucks matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling. Optional: Skid mounting Key features: Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement All the actuators are operated by proportional control valves Key specification: Drill HOle Diameter : Dia 8" DTH/ 10" Rotary Depth : 350meters Carrier : Man Truck/6x4 Ashok Leyland Air Compressor : 1100 cfm @ 300 psi Mud Pump : 765 lpm @ 16 Bar Application : Water Well Optional : Skid/Two truck version
The PDTHR-600 SKID drill rig is capable for water well drilling application in Rock and Soft formation.It's simple and compact design, excellent performance, high accessibility and reliability at affordable cost in its class. The PDTHR-600 rig can be mounted on local truck matching the rig to the terrain it will be used. Can be used for mud rotary drilling Optional Skid mounting Key features · Proven technology ensures easy maintenance and more productive. · The rig can be customize as per customer requirement Key specification Drill rod handling : 15 feet (4.5 meter) / 20 feet (6.0 meter) Drilling depth : up to 2,000 feet (600 meters) Drilling diameter : 12.25 inch (311 mm)-16 inch(400 mm) Pull up force : 40,200 kgf Drill head torque : 320 kg.m Mud pump : 750 lpm-1,000 lpm Carrier : Skid Mounted
Description: The PCDTHR 300 drill rig is ideal for exploration drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PCDTHR 300 rigs flexibility means it can be mounted on single truck version, crawler mounted versions and on local truck matching the rig to the terrain it will be used. Optional:Multipurpose drill rig (core, DTH, mud rotary) Key features: · Proven technology ensures easy maintenance and more productive. · The rig can be customize as per customer requirement Key specification: Drill rod handling : 15 feet Drilling depth : up to 1000 feet (300 meters) Drilling diameter : NQ-HQ Pull up force : 11,200 kgf Drill head torque : 60 kg.m 240 kg.m Gear Box : Dual speed gearbox Mud pump : Suitable American Mud Pump Carrier :Truck(Optional: Crawler)
Technical Specifications: Prime Mover: Truck Make : TATA Model : 2518 Gross Vehicle weight : 25 MT Engine Rating : 230 HP @ 2400 rpm Air Compressor Make : ELGI / Atlas Copco Model : 1100/300 CFM : 1100 PSI : 300 (20.8 Bar) Drill Depth Maximum Depth : 300Meters(1000Feet) Rod Handling : 4.5 inch(15Feet) Hole Mud Pump Make : G&P/ Lakshmi Model : 6X6 Stroke : 150mm Liner Size : 150mm Mast Max Capacity : 18 tons (39600 lbs) Height : 8.0 mtr (27 ft) Rod handling capacity: 6.0 mtr (20 ft) Main Hoist Assembly Line Pull ( Bare Drum): 3000 Kgf Max Line Speed : 40 M/Minute Wire Dia : 16 mm Drive : Hydraulic
The PDTHR-300 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-300 rigs flexibility means it can be mounted on single truck version, two truck versions and on local truck matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling Optional: Skid mounting Key features: Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement Key specification: Drill rod handling : 15 feet (4.5 meter) - 20 feet (6.0 meter) Drilling depth : 1,000 feet (300 meters) Drilling diameter : 6.5 inch (165 mm) - 12.25 inch (311 mm) Pull up force : 11,200 kgf Drill head torque : 600 kg.m Air compressor : 1,100 cfm/300 psi Mud pump : 700 lpm-1,000 lpm Carrier : Truck(Optional: Skid)
PRL Truck Mounted Drill Rig Model PDTHR-350 is primarily designed for water well applications as drinking water or for agricultural use. PRL PDTHR- 350 is among the best and most sought after truck mounted drilling rig in the market. It isintended for use in borehole drilling for consumable and agricultural purposes. PRL PDTHR 350 is designed for 152 254mm (6 to 10) diameter holes with a down the hole hammer and 152-350mm (6-14) with Rotaryoperation.
Acoustic pipe is the only specialized application in ultrasonic testing of reliable system in the market. Is the use of cold hard tube professional forming, use clamp pressure connection, spiral connection, flange connection means such as, in the concrete casting is reliable anti-seepage effect. The finished product usually include ultrasonic has standard length of steel tube and forming a method of connecting joint connection. Can reserve a channel make detection head can direct to the bottom of the pile foundation
Paper Drilling Machine with 1400 rm drill bit sped and stroke speed of 11 or 22 strokes per minute obtains fine results o different kinds of paper and is fitted with the automatic table-lift system. Equipped with 4 drilling heads, its capable of drilling from 3mm to 14mm.
BTA gun drilling machine is a column moving type equipped with gun drilling function with a small diameter and the BTA function with a large diameter or a combination. Spindles are available in 1 or 2 spindle configurations and work independently. This high precision and high strength spindle unit and applying an exclusive telescopic chip cute with a high torque driving system.
Rubber Drill Pipe Wiper Product Description Detailed introduction: 1. Drill Pipe Wiper 2. Drill Pipe Wipers are made of specially designed rubber compound having tremendous resistance to cutting, tearing and abrasion. They are available for water based and oil based drilling mud. Designed for application.They are available for 5", 3.1/2", 2.3/8" and 2.5/8" drill pipes / tubings. 3.Size for 27/8",31/2" 5" 51/2"drill pipe 4.wiper is designed to clean casing,tubing in oilwell . Advantages: 1. high strength- Resistance, wear- Resistance 2. Resistance to high temperature 3. Absorption oscillation resistance to high speed 4. Resistance to heavy load 5. Internationally advanced quality level, can be designed to meet the specific needs Description: Material: Butyronitrile rubber is the basic material. The inner steel skeleton is to prevent deformation. Main application: prevent drilling fluid returning from the drilling. Clear drilling fluid on the drill pipe wall to prevent the corrosion of metal. Hardness: 8 to 95 ±5 shore A ,±3 shore A tolerance specially Color: for rubber, usually black, for silicone, can be in any color as you want Machine type: 50 to 400 tons Mold/samples lead-time: For prototype mold, usually in 7days For mass production mold, usually in 2 weeks For some special molds, can be in 30 days, especially for some automotive rubber molds
Oilfield drill pipe clean wiper Product Description Oilfield drill pipe clean wiper are designed to place around the pipe to remove mud and debris from the pipe to provide safer handling of the pipe and a cleaner and a safe rig floor. The drill pipe wipers manufactured by us are made of a long lasting, durable rubber compound that is resistant to mud, water and oil based drilling mud. Application: 1. Drilling rig 2. Work over rig 3. Swabbing unit Item Parameters Material of pipe wiper Natural rubber, nitrile rubber Usage Oilfield drilling pipe Hardness. Shore A 60 +/- 5 Tensile strength. MPA 16 Elongation at break. % 460 Inner diameter. 2 3/8" to 7" Outer diameter. 9" to 26" Types of pipe wiper Flat type, dual type and dual split type
5 1/2" Nitrile Rubber Solid Dual Split Drill Pipe Wiper Product Description Drill Pipe Wipers are made of specially designed rubber compound having tremendous resistance to cutting, tearing and abrasion. They are available for water based and oil based drilling mud. Designed for application to Drill Pipe where a solid master bushing is used. We manufacture both Dual Split and Single Solid Type of Drill Pipe Wipers. Dual wipers are made with a spring steel reinforced ring. The split in the dual wipers allows are wiper to be threaded easily onto the pipe. Our split type wipers offer the advantage of a symmetrical, one piece design with multiple wiping action. it provides more than two full turns of continuous wiping surface around the full circumference of the pipe. Unlike split tyep wipers, there are no gaps, in the inner wiping edge to leave unwiped streaks on the pipe. Single Solid Wipers have a series of concentric rings moulded around the inner wiping surface. Each ring carries a specific size, identifying the area of the center hold to be cut out for a specific drill pipe size. Description Box Pack Bulk Pack Product Weight 9 x 2-3/8 Pipe Wiper Low Profile 10 450 2.2 lbs 9 x 2-7/8 Pipe Wiper Low Profile 10 450 2.2 lbs 9 x 3-1/2 Pipe Wiper Low Profile 10 450 2.2 lbs 9 x 2-3/8" Square Edge Pipe Wiper Std (60 Duro) 10 450 2.2 lbs 9 x 2-3/8 Square Edge Pipe Wiper Soft (50 Duro) 10 500 2.2 lbs
