Waterproof door
echnical Features Profile Width : 70 mm Number of Cubicles : 5 Number of Gaskets : 2 (Middle Gasket) Gasket : TPE Gray/ Black Lath : Single Nail �?�¢?? PCE Gasket Glass Thickness : 4, 20, 24, 30, 36, 44 mm Standard : TS EN 12608-1 B Class Heat Conductivity Coefficient : Uf: 1.3 W/m2K (orta gasket) Uf: 1.4 W/m2K Many colors available SUPERIOR INSULATION Designed in 5 chambers and, 70 mm frame width, System provides excellent performance in respect of the heat insulation. The base heat transmission coefficient (Uf) of the system is 1,3 - 1,4 W/m2K as found out as a result of the tests carried out in the IFT Rosenheim. For the applications with the middle
System: HT102 Window Type: Sliding Window Profile Thick: 2.0mm Profile Width: 102mm Standard Glass: 5mm+12A+5mm Standard Hardware: German Siegenia Brand
System: HT102 Window Type: Sliding Window Profile Thick: 2.0mm Profile Width: 102mm Standard Glass: 5mm+12A+5mm Standard Hardware: German Siegenia Brand
Window Type: Awning Window Profile Thick: 2.0mm Profile Width: 102mm Standard Glass: 5mm+12A+5mm Standard Hardware: Australia Doric Brand
Profile Thick: 2.0mm Profile Width: 102mm Standard Glass: 5mm+12A+5mm Standard Hardware: G-U Hardware
Size :- 75mm x 50mm, 100mm x 50mm, 90mm x 63mm, 115mm x 63mm Length :- 5ft, 6ft, 7ft, 14ft Note :- Special Length available on request.
Size - Length :- 72, 75,78, 81, 84 Width :- 26, 28, 30, 32, 34, 36, 38, 40, 42, 48 Thickness :- 24mm,28mm,30mm,32mm Note :- Special Sizes & Thickness available on request.
Profile Thick: 2.0mm Profile Width: 153mm Standard Glass: 5mm+12A+5mm Standard Hardware: Australia Doric Brand
1. Door curtain: High strength polyster textile fiber 2. Curtain thickness: 0.8 - 1.2 mm 3. Opening speed: 0.8 - 1.5 M/S 4. Closing speed: 0.6 - 1.0 M/S 5. Side Rail options: 2.0mm thick cold-roll steel sheet (Bao Steel) / 2.0mm thick stainless steel 6. Tube shaft: 114mm diameter / 2.5mm thickness round tube 7. Cover box options: 1.0mm thick cold-roll steel shett (Bao Steel ) / 1.0mm thick stainless steel 8. Motor brand: SEW / SIEMENS 9. Motor power: 550W / 750W / 1500W / 2200W / 4000W 10. Control box: SIEMENS / MITSUBISHI 11. Safety performance: Airbag / Photo cell 12. Optional control mode: Geomagnetic right, Radar, Stretcing wire switch, Linkage interlock, Pull rope, etc
Interior Door with frame,lock and bolt. Wpc Door painted both sides (mate and hightgloss) the frame of door made from pine wood, avilitable in europian and asian closing system.
Sheet Thisckness 1,5mm Rock Wool 5cm Fire Resistance 120min.
SHEET THICKNESS: 1,2mm FRONT SIDE: MDF 10mm BACKSIDE: MDF 10mm HEAD INSULATION, STYROFOAM : 10cm LOCK: KALE & HOK BINOCULARS WOODEN DOOR SILL 10cm MONOLOCK
Product Description : High level interior doors made of quality MDF panels.Between the panels there is a wood frame and a noise cancelling and heat preserving filling. The filling also can be solid wood. There are offered two types of MDF doors: Laminated MDF (clean look, sturdy and reliable) and Veneer MDF (sophisticated and heavy look, easy to repair in case of small scratches).The appearance and core of the door may vary greatly according to customers’ needs. We also offer HDF doors and glazed doors with special strengthening holders for the glass. Double faced doors are made of aluminum and MDF panels.The face of the door in the bathroom is made of aluminum and has a full size mirror on it, but on the other side it looks like a regular MDF interior. It is perfect if the customer wants all the doors to look the same way, but in the same time he doesn’t want to worry about water and moisture in the bathroom. The door set accessories include door, frame, locks, architraves, hinges and handles (all in any size need). The door design, size and main specifications are upon customer’s requests. Price of product ( USD price or FOB price) : Negotiable, depending on the quantity order Product origin : Bulgaria Key Specifications/Special Features : Minimum Order Size : 100 sets Packaging details: As buyer request
Product Description : High level exterior doors, two and half times stronger than usual standarts for armored doors.The doors are made of two panels of stainless steel sheets with individual thickness of 1.5 mm or 2.00 mm each. There are C-shaped metal ribs between the panels through the whole door.The space between the ribs is filled with special fire resistant, noise and heat cancelling padding. The body of the door can be covered with a material according to customers’ choosing – paint or MDF panels, all in a variety of colors. The door thickness is 62 mm if it is covered with paint and 80 -90 mm if it covered in MDF panels. Special hinges are used for the doors suspension, that allow the lowering or lifting the door by around 10 mm., even if it has been installed. The company-producer has created a special defensive box inside the door for a lot additional security. The door locking system is placed in that box. The locking system and the number of the locks also can be done under customers’ needs. The doors covered in MDF panels include MDF Laminated Exterior Doors and MDF Veneer Exterior Doors. The exterior doors are between 620- 900 mm thick and weigh between 70 and 110 kg, depending on the size and materials used for coverage. There are offered also Double Faced Exterior Doors (different color on every side) and Double Exterior Doors (two doors covering a big opening like a gate). The door set accessories include door, metal frame, decorative wooden frame, decorative architraves for both sides, locking system, locks, hinges, handles, door viewer, installing bolts. The door design, size and main specifications are upon customer’s requests. Price of product ( USD price or FOB price) : Negotiable, depending on the quantity order Key Specifications/Special Features : Location of the product: Bulgaria, Sofia city Delivery terms: Negotiable Payments terms: LC or TT
WPC profile production line also known as plastic wood profile production line Plastic wood compound materials(WPC) is a new pattern environmentally friendly material made of wood fiber (inc. timber scrap, straw, rice hull) and hot plasticity plastics(mainly waste plastics). It has the advantage of plastics as good plasticity, tensile and impact strength, moth and corrosion resistance. Also it has advantage of wood as easy-cutting and drilling for good process as well as the nice appearance of wood. Its also ideal substitute in fields of packaging, architecture, etc. Our company mainly produces two kinds of machinery lines including PVC WPC foam production line and PE/PP WPC production line. The extruder for such line is featured for low-temperature plasticity, low cutting, complete high-torque gas emission, etc.
Based on many years of experience and our knowledge as Ferra Group, which blends with the innovative vision we are trying to be a mediator to reach a higher level of Turkish door market. To be completed of knowledge and experience that we are strict pursuits of technology with our expert team of staff. As Ferra Door with our latest technology machine park and the high quality standard products in original colors and models we can connect with our consumers. We provide the quality and reliable protection and comfort to our consumers. All components used in the manufacture of doors are chosen carefully with our experience of years. Wood fiberboard, primer, paint, coatings, accessories and other components, according to European Union standards, by ensuring complete certification from suppliers that we pay attention to the DIN standards. The vision of our door and integrated timber solutions for the future with the aim of becoming one of the world's most ambitious partners, using materials that do not harm human and nature, environmental awareness is kept in the forefront, we care about the ecological sensitivity. We are manufacturing Steel Security Doors.
Interior Room Door Urartu : Color : Urartu Partly stitched glass preparation Side Rims : 12mm Thickness, 8cm Width Upper moldings : 9mm thickness, 8cm width Case Thickness : 40mm Wing thickness : 42mm Melamine Surface : 4mm
Interior Room Door 4635 : Color 4635 Case Color Anthracite, White, Aluminum Case Frame Aluminum Wing Thickness 42mm Mdf Surface 6mm
Interior Room Door 4634 : Color 4634 Case Color Anthracite, White, Aluminum Side Rims 12mm Thickness, 8cm Width Upper Moldings 9mm Thickness, 8cm Width Case Thickness 40mm Wing Thickness 42mm Mdf Surface 6mm
