The perfect combination of look-down display and high-security storage at the same time. These high-specification drawers are produced in folded steel and powder-coated to finish within a metal extrusion frame for all-round security. Individual drawers rests on dedicated pulleys for easy opening and closing. External or internal lighting systems are available. A micro-switch sensor allows lighting to be switched on only when each drawer is open to prevent long exposures of light-sensitive exhibits to artificial light. Applicable to high density or compact display and storage.
Relicase& Trika Demountable Showcase System comprises individual case modules each of which can be quickly and easily fixed together to create larger showcases whilst maintaining the security and sealing that is expected from a permanent showcase installation. Modules can be assembled in a variety of custom configurations. Each module is a stand-alone showcase with full height glass for maximum flexibility. Glass Tops or Lighting Tops are interchangeable between modules. Displays can be mounted on internal plinths, dress panels or fully adjustable hanging rod shelving. Standard Individual Module Specification Trika Demountable - with Glass Top or Lighting Hood Top. Dimensions900 module700 module Overall height:2100mm2100mm Internal height: Glass Top1950mm1950mm Lighting Hood Top1900mm1950mm External width:900mm700mm Internal width:850mm650mm External depth:900mm700mm Internal depth:850mm650mm
5-sided all-glass table-top display case with sloping glass hood set at an angle. Open plan display plinth for perfect all-round viewing visibility. Comes with built-in silica gel drawer compartment concealed below table top. Ideal for libraries and archives for historic documents, flat object displays and smaller exhibits that require close-up viewing. Cases offer ease of access with a high level of security and environmental control.
5-sided all-glass table-top display case with sloping glass hood set at an angle. Open plan display plinth for perfect all-round viewing visibility. Comes with built-in silica gel drawer compartment concealed below table top. Ideal for libraries and archives for historic documents, flat object displays and smaller exhibits that require close-up viewing. Cases offer ease of access with a high level of security and environmental control.
4-sided, all-glass tabletop display case on an open plan, display plinth to allow optimum all-round visibility. Glass hood is securely bonded into a locking metal frame. The perfect choice for the display of smaller objects and documents, it offers ease of access with a high level of security and environmental control and is widely used by museums, libraries, and archives.
5-sided, all-glass tabletop display case on a closed plinth. Power supply, microclimate control and access opening system are incorporated within the high-security plinth below. A security laminated glass hood is securely bonded into a locking metal frame. It is the perfect choice for the display of smaller objects and documents. It offers ease of access with a high level of security and environmental control and is widely used by museums, libraries, and archives.
Niche display cases can be mounted directly against a wall surface with options for a hinged glass hood to provide a frameless glass case system or mounted within a boxed-up partition wall. Internal displays for flat objects such as coins, medals, documents, insects and stamps or exhibits that require a close-up view for study and research are ideal. An optional artsorb compartment for silica gel media is concealed below the bottom dress panel. Access can be from the front with concealed hinges at the top with high security locks at the sides.
Ideal for paintings, textiles, coins, medals, insects, stamps or any flat documents or objects, the wall-hung display case system is directly mounted on wall surfaces to provide a close-up, intimate view of the display exhibits. With a hinged glass hood, this case system is able to deliver a frameless, shallow exhibition area ideal for displaying low profile exhibits. An optional artsorb compartment for silica gel media is concealed below the bottom dress panel. Access can be from the front with concealed hinges at the top with high security locks at the sides.
Built-in display cases are engineered using an ultra-slim aluminium extrusion design profile with only a visible front glass panel. The case front can be fitted to any depth of a showcase carcass. This approach provides a high-security display area with 100% full opening access integrated with a concealed side hinge door. The back-wall is a solid backing panel that can come with optional fabric wrapping, folded steel in powder-coated finish or inlaid with vertically adjustable shelving systems for heavy exhibit displays. An optional artsorb compartment for silica gel media is concealed below the bottom dress panel.
The case system allows large exhibits to be featured without interruption along an entire gallery space. Case can be mounted against the wall or bolted to the floor to suit any gallery dimensions. Comes with options for easy access with a fully-automatic swing door, or an electronically-synchronized pull and slide door front. Front glass panels can be in one single piece or divided to multiple panels of two, three or more. A customized silicone inert seal between glass joints provides air-tightness within the display area. Different options for lighting is concealed within the separate light hood compartment above the showcase. Back dressing panels form the vertical areas for mounting small or larger exhibits with accessories for cantilevered shelving, suspended glass panels or graphic rails which can be added later.
The case system allows large exhibits to be featured without interruption along an entire gallery space. Case can be mounted against the wall or bolted to the floor to suit any gallery dimensions. Comes with options for easy access with a fully-automatic swing door, or an electronically-synchronized pull and slide door front. Front glass panels can be in one single piece or divided to multiple panels of two, three or more. A customized silicone inert seal between glass joints provides air-tightness within the display area. Different options for lighting is concealed within the separate light hood compartment above the showcase. Back dressing panels form the vertical areas for mounting small or larger exhibits with accessories for cantilevered shelving, suspended glass panels or graphic rails which can be added later.
Expandable display cases can be mounted directly into a wall, In a modular design, the display cases combines sections or multi-units to produce an entire train of a single case with no limit on the size of its length, Full-Automatic swing-door with electrical control. Shelves can either be suspended on stainless steel rods that are adjustable along a discreet channel above in the case soffit via wireless control end. Cantilevered shelving or suspended graphic panels can be added on or configured at will in our modular case system.
Expandable display cases can be mounted directly into a wall, In a modular design, the display cases combines sections or multi-units to produce an entire train of a single case with no limit on the size of its length, Full-Automatic swing-door with electrical control. Shelves can either be suspended on stainless steel rods that are adjustable along a discreet channel above in the case soffit via wireless control end. Cantilevered shelving or suspended graphic panels can be added on or configured at will in our modular case system.
Wherever applicable, all our cases can be customized according to your exhibits. The Abnormity cases allow anchored onto the floor or free-standing. Different options and combinations demand acute angles of each showcase corner and contour were tight tolerance, Each tiny variance in the extrusions of the glass machining must be accommodated. With integral lighting ,the display case offers splendid display with high specification features and exceptional performance.
Expandable design allow large and long display cases to run along an entire gallery wall space. These combinations can be in a long straight linear form, stepped sections, cruciform, L-shape or U-shape. Different options and combinations can be factory fitted with applicable microclimate control such as constant humidity control, integral lighting, varying alarm etc. Applicable to most large or small exhibits and especially sensitive paintings or entire stories of exhibits. All construction materials and finishes within the display chamber meets international museum standards of conservation and air-tightness.
Frameless all glass display case with lighting compartment on top. The lighting compartment is separately sealed and isolated from the display compartment to provide an integrated lighting system within the showcase itself. The lighting diffuser prevents ultraviolet and heat radiation from entering into the display area whilst evenly distributing light. Constructed on a robust steel plinth, the freestanding display case can be customized with additional lighting, environment control and other features for the display of a wide range of sensitive exhibits. All materials and finishes meet international museum conservation standards.
Frameless all glass display case with lighting compartment on top. The lighting compartment is separately sealed and isolated from the display compartment to provide an integrated lighting system within the showcase itself. The lighting diffuser prevents ultraviolet and heat radiation from entering into the display area whilst evenly distributing light. Constructed on a robust steel plinth, the freestanding display case can be customized with additional lighting, environment control and other features for the display of a wide range of sensitive exhibits. All materials and finishes meet international museum conservation standards.
The removable glass top is a feature that allows different kinds of lighting solutions to be added on. Glass top can be changed to a diffuser glass that allows even distribution of light from an external light source. In addition, cases with this removable glass top can be fitted with a light hood that houses additional lighting elements such as LED, fluorescent, low-voltage halogen or even fibre optics lighting systems. Other task lighting can also be introduced at the sides or bottom of the case through this removable glass top.
The case system allows large exhibits to be featured without interruption along an entire gallery space. Case can be mounted against the wall or bolted to the floor to suit any gallery dimensions. Comes with options for easy access with a fully-automatic swing door, or an electronically-synchronized pull and slide door front. Front glass panels can be in one single piece or divided to multiple panels of two, three or more. A customized silicone inert seal between glass joints provides air-tightness within the display area. Different options for lighting is concealed within the separate light hood compartment above the showcase. Back dressing panels form the vertical areas for mounting small or larger exhibits with accessories for cantilevered shelving, suspended glass panels or graphic rails which can be added later.
The Vision case range allows for complete all-round visibility and is ideally suited for medium and large display items such as art objects, costumes and mannequins. The slim frame on the top element creates an almost invisible all round viewing for objects in a dramatic setting. Customization of sizes is possible with considerations for internal lighting which is mounted within the frame glass top. Accessories such as hanging rails and graphic backdrop can be incorporated as add-ons later. Case system comes with a concealed drawer for passive silica gel / artsorb at the bottom of the case.
