Upper: Hydrophobized full grain black leather, Sympatex standard for , 120 min. watterproof with Sympatex lining
Sole: PU/PU dual density direct injection outsole, absorbing tread energy in heel
1 pair/box or 1 pair/PE sack, 5 pairs of one size/carton
High boot - type Rigger (S1)
Upper - Buffalo Booty leather & split booty combination leather upper, color tan
Lining - winter FUR
Sole - direct injected PU, type VIBRANT
Boot with steel toe cap
1 pair/box or 1 pair/PE sack, 5 pairs of one size/carton
Fire-fighting rescue action top boot
Fire-fighting rescue action top boot, hydrophobized leather, Antistatic construction, Cambrella lining, Nitrile rubber outsole with steel anti-perforation insert, resistant to oil, fuels, acids and temperature 300IC, Anatomic replaceable innersole washable in water 40IC, absorbing tread energy in heel, This boots are certified and approved to be used by fire-fighting rescue crews, Boot stiffened with steel toe cap.
1 pair/box or 1 pair/PE sack, 5 pairs of one size/carton
Collection ProWhite
Sandal shoe, full grain leather upper, lining combination leather on back side and textil on vamp, single PU cemented sole, steel toe cap, ESD Shoe
1 pair/box or 1 pair/pe sack, 5 pairs of one size/carton
Collection profire
Fire-fighting rescue action top boot, hydrophobized leather, with fast-action lacing and zip with safekeeping spike special tu cap antistatic construction sympatex membrane lining nitrile rubber outsole with steel anti-perforation insert, resistant to oil, fuels, acids and temperature 300c anatomic replaceable innersole washable in water 40c, absorbing tread energy in heel. This boots are certified and approved to be used by fire-fighting rescue crews. Boot stiffened with steel toe puff.
1 pair/box or 1 pair/pe sack, 5 pairs of one size/carton
Nitrile gloves (9.2 eur box of 100), hazmat suits (1.98 eur piece), syringes (6.15 eur box off 100) medical protective equipment, face masks, medical coveralls.
Compact detector from new series, which substitute type DEGA 03,.Serves to one- or two- Level signalization of detected gas concentration in guarded area. Its construction, kind of installation and service is designed for use in smaller business, boiler rooms, garages etc.. Detector used semiconductance sensor, which transforms change of concentration of detected gas at change of electrical resistance.Exceed of pre-set limits is signalized optical, acoustic or with internal siren and switch of potential-free relays contacts. It ś possible to energize device with system voltage 230 V AC, 12 or 24 V DC.
Humanitarian anti-mine boots - ZEMAN AM-S (with Sympatex lining)
Special all leather boots with protection against anti-personnel contact mines with charge of 70g High Explosives (TNT). Equal to 50g charge of of Semtex. The boots have been developed in co-operation with a leading Czech expert in EOD. Anti-mine boots are characterised by a robust and resistant design with long-term service life and they do not contain any metallic parts. Boots can be optionally provided with Cambrella lining (Model AM-C) or with Sympatex membrane giving comfort climate (Model AM-S).
All this special safety features providing boots with the total weight of only 2,980g. ZEMAN AM boots are protected by patent.
Warranty period: 24 months
Packaging: 1 pair/box or 1 pair/PE sack, 5 pairs of one size/carton
For the daily hygiene of Your and your children. Practical small package with a carabiner, thanks to which you can easily attach the gel to children on a backpack, jacket, briefcase or key ring and thanks to which they always have disinfection at hand. With a delicate scent of lemon grass.
Because we love our children, we want maximum safety for them. CLINELY gels offer hand protection for our little ones with an extra dose of hydration thanks to Florasphere microcapsules containing Jojoba oil and vitamin E. We don't want any harmful chemicals or synthetic alcohol. In addition, the absolutely cooll carabiner and labels are simply original :) A useful friend on the way to school, on an adventure in nature or in the bustling urban jungle.
BASIC SPECIFICATIONS: CLINELY rinse hand gel contains certified ingredients: Cane Squalane and TeaTree oil. CLINELY gels are made by a Czech manufacturer in accordance with the WHO recipe.
I m2 ex d i, ii 2gd ex d td a iib t3-t4t tmax. Surf. Ip 65 ex.
Technical description: luminaire consists from body, basic plate and
Flange with protective glass. Body and flange are castings from grey cast
Iron treated with polyester powder paint. Luminaire can be suspended
By the steel pendant with 2 eyes o 18 mm on the upper part of the
Body. Connecting area (increased safety „d“), with connecting clamps and
2 cable glands, is placed on the side of luminaire. Flange cable glands
No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16
Mm (no. 3-99.6170/1 for o 16 – 20 mm optionally). Area is enclosed
With cover from grey cast iron. Steel basic plate with electric parts
And reflector is fixed in the body. Flange with glass cover is screwed
In the body and secured with locking screw and silicon sealing
Against unlocking, thread shapes a rift of flameproof enclosure „d“.
Protective hardened glass resistant against mech. Shock min. 7 j is
Fixed to the flange, the connection is filled with polyurethane putty.
A steel hinge is fixed to the flange as the mobile one and enables to
Hang the flange during mounting or dismounting. Steel parts are
Galvanized and chromated. Luminaire is equipped with protective guard from steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases. Luminaire is equipped with 2 inner and 1 outer earthing clamps for conducting connection. Luminaire is designed as the through-way one for 4-core cable; when used as the end piece, there is necessary to use blinding plug (optionally on order). Packing carton is filled with polyurethane foam instapak.
Luminous sources:
Spc 300 and 500w, with ballast box hql 250w, 400w, nav-e 210, 350w
Technical description: luminaire consists from body, basic plate and flange
With protective glass. Body and flange are castings from grey cast iron treated
With polyester powder paint. Steel pendant with eye o 18 mm is fixed to the
Upper part. Connecting area (increased safety „d“), with connecting clamps
And 2 cable glands, is placed on the side of luminaire. Flange cable glands
No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 mm (gland
No. 3-99.6170/1 for cable o 16 - 20 mm). Area is enclosed with cover from
Grey cast iron. Steel basic plate with electric parts and reflector is fixed in the
Body. Flange with glass cover is screwed in the body and secured with locking
Screw and silicon sealing against unlocking; thread shapes a rift of flameproof
Enclosure „d“. Protective hardened glass is resistant against mech. Shock min.
7 j and is fixed in the flange, the connection is filled with a polyurethan putty.
A steel hinge is fixed to the flange as the mobile one and enables to hang
Up the flange during mounting or dismounting. Steel parts are galvanized
And chromated. Luminaire is equipped with protective guard from galvanized
Steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting
Terminal block enables interchanging 2 phases (4-core cable). Luminaire
Is equipped with 2 inner and 1 outer earthing clamps for conductive connection.
Luminaire is designed as the through-way one, when used as end piece, there is
Necessary to use blinding plug (optionally on order). Packing carton is filled with
Polyurethane foam instapak.
Luminous sources:
Hwl160 w e27, dulux d26 w g24d-3, bulb100w/220 e27, nav-e 110 w e27, hql125 w e27, nav-e 50/l 50 w e27, hql 80 w e27, clas 200 w e27, master pl e 23 w e27 and next
2G Ex de IIC T4-T6 Gb
II 2G Ex de IIC T4-T6 Gb
II 2D Ex t IIIC T max.surf Db
Luminaire consists of body, basic plate and
flange with protective glass. Body and flange are made of AlSi alloy
treated with polyester powder paint. Luminaire can be suspended
by the help of steel pendant with eye o 18 mm. The connecting area
(increased safety „e“) is placed on the side of the body and equipped
with connecting clamps and 2 cable glands HSK-K-Ex M25x1.5 for cables
o 9-16 mm. Area is enclosed with cover and sealed with silicon. There is
aluminium basic plate with electro-module mounted inside the
luminaire. Electro-module consists of 20 x LED CREE XP-G (luminous
flux 4000 lm, lumen per watt 88 lm/W, colour temperature 3700-5000,
Colour Rendering Index ~80, guaranteed life-time min. 50.000 hrs.) and
cooling unit. Input of the luminaire is adjustable (45W/22,5W) by changing
output current of the LED driver 700mA/350mA. Flange with protective
glass is screwed in the body and locked with securing screw; thread
shapes a rift of flameproof enclosure „d“. Protective hardened glass is
resistant against mech. shock min. 7 J and is fixed in the flange; the connection
is filled with polyurethane putty. The mobile steel hinge is fixed to
the flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw V-Ex or to blind one unused cable gland with blinding plug HSK-V-Ex. The blinding parts can be delivered on order optionally. Versions K are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam Instapak.
luminous sources:
EcoClasik 140W E27, CLAS 200W E27, DULUX D26 W G24d-3, Bulb100W/220 E27, NAV-E 110 W E27, HQL125 W E27, NAV-E 50/l 50 W E27, HQL 80 W E27, Master PL E 23 W E27 and next.
Carton 410 cm x 240 cm x 240cm , Weight 10 kg/pc
26 Safety Goggles Suppliers
Short on time? Let Safety Goggles sellers contact you.
