Semi top police boot - black with Sympatex lining Upper: Hydrophobized full grain black leather, Sympatex standard for , 120 min. watterproof with Sympatex lining Sole: PU/PU dual density direct injection outsole, absorbing tread energy in heel 1 pair/box or 1 pair/PE sack, 5 pairs of one size/carton
High boot - type Rigger (S1) Upper - Buffalo Booty leather & split booty combination leather upper, color tan Lining - winter FUR Sole - direct injected PU, type VIBRANT Boot with steel toe cap 1 pair/box or 1 pair/PE sack, 5 pairs of one size/carton
Fire-fighting rescue action top boot Fire-fighting rescue action top boot, hydrophobized leather, Antistatic construction, Cambrella lining, Nitrile rubber outsole with steel anti-perforation insert, resistant to oil, fuels, acids and temperature 300IC, Anatomic replaceable innersole washable in water 40IC, absorbing tread energy in heel, This boots are certified and approved to be used by fire-fighting rescue crews, Boot stiffened with steel toe cap. 1 pair/box or 1 pair/PE sack, 5 pairs of one size/carton
Footwear, working shoes, safety boots, military boots, antimine boots, fire-fighting boots.
Collection ProWhite Sandal shoe, full grain leather upper, lining combination leather on back side and textil on vamp, single PU cemented sole, steel toe cap, ESD Shoe 1 pair/box or 1 pair/pe sack, 5 pairs of one size/carton
Collection profire Fire-fighting rescue action top boot, hydrophobized leather, with fast-action lacing and zip with safekeeping spike special tu cap antistatic construction sympatex membrane lining nitrile rubber outsole with steel anti-perforation insert, resistant to oil, fuels, acids and temperature 300c anatomic replaceable innersole washable in water 40c, absorbing tread energy in heel. This boots are certified and approved to be used by fire-fighting rescue crews. Boot stiffened with steel toe puff. 1 pair/box or 1 pair/pe sack, 5 pairs of one size/carton
Dega gas detector -stationary, compact - dega 04 Compact detector from new series, which substitute type DEGA 03,.Serves to one- or two- Level signalization of detected gas concentration in guarded area. Its construction, kind of installation and service is designed for use in smaller business, boiler rooms, garages etc.. Detector used semiconductance sensor, which transforms change of concentration of detected gas at change of electrical resistance.Exceed of pre-set limits is signalized optical, acoustic or with internal siren and switch of potential-free relays contacts. It ś possible to energize device with system voltage 230 V AC, 12 or 24 V DC.
Gas detector.
Humanitarian anti-mine boots - ZEMAN AM-S (with Sympatex lining) Special all leather boots with protection against anti-personnel contact mines with charge of 70g High Explosives (TNT). Equal to 50g charge of of Semtex. The boots have been developed in co-operation with a leading Czech expert in EOD. Anti-mine boots are characterised by a robust and resistant design with long-term service life and they do not contain any metallic parts. Boots can be optionally provided with Cambrella lining (Model AM-C) or with Sympatex membrane giving comfort climate (Model AM-S). All this special safety features providing boots with the total weight of only 2,980g. ZEMAN AM boots are protected by patent. Warranty period: 24 months Packaging: 1 pair/box or 1 pair/PE sack, 5 pairs of one size/carton
Goods: non-radioactive selenium in the form of powder, enriched in a stable isotope se74 Goods located in hermetically sealed glass ampoules, in an inert gas atmosphere; ampoules in plastic pencil case with seals; pencil cases packed in sealed boxes
This VWT-FFS-4372 Double Loop tunnel construction and its technology equipment are optimized for a professional use of sportsmen, army troop as well as general public and schools. Optimization of the fan can be performed on any other scenario of the use of the tunnel (like only sport tunnel utilization, or only to tourism utilization, military and special training purposes, or eventual their combination...). Optimization means a proper selection of tunnel dimensions, fans and engines parameters for proposed purposes to gain an optimal ratio between desired performance and operational costs. Dimensions and technical parameters of this tunnel offer the best conditions for the professional requirements on speed, space and height. Its size provides ample space for the entire training even of group formations of eight skydivers. Tunnel with 4,3 m of flying chamber diameter is the perfect place for training of army parachutes and special troops with their specific equipment. From tourist's point of view, the tunnel offers comfortable space even for flying couples with instructors or other smaller groups. Thanks to a comprehensive fan optimization the, tunnel allows operation of profi-flights as well as fun-flights at very low operation costs. Materials and Dimensions Air conductors in the aboveground part of the tunnel are made of sheet steel. All steel elements are provided with corrosion protection. Tunnel skin is made by sound-insulation panels KINGSPAN. Net dimensions of the tunnel are: width 30 m depth 10 m height 32 m The typical depth of foundation of ground concrete structure is 7,5 m. The typical height of the tunnel above the ground is 24 m. Flight chamber Flight chamber consists of a glass part, which is on its top connected to a steel construction of tunnel shell. Lower part of the flight chamber is purely cylindrical with a diameter of 4,3 m and a height of 5 m. The upper part of a flight chamber is made from steel and its height is 9 m. The shape of this part of flight chamber is gradually changing from a circular diameter of 4,3 meters to circular diameter 4,3 x 4,3 m. The overall maximum height of flight chamber 14 m The height of the glass part of flight chamber 5 m Diameter of flight chamber 4,3 m Maximum speed Maximum air speed at which the tunnel can be operated continuously is 80+ m/s (300+ km/h). Motors, fans and electronic equipment The air stream is formed by four vertically stored fans, each of 3.15 m in diameter, which are powered by a 4 electro-motors, each rated at 355 kW. RPM are controlled and regulated by 4 frequency changers from ABB. Control and monitoring system of the tunnel is realized using SIEMNS technology. Cooling Tunnel cooling is provided by an active cooling unit with a maximum power consumption of 330 kW, which corresponds to a maximum cooling performance of 1 000kW. Cooling compressor unit is located outside the tunnel and two pairs of optimized coolers installed in the tunnel design ensures a comfortable temperature in the flight chamber even during very warm summer period. During cold seasons, from the certain threshold temperature, the compressor unit is automatically switched to dry coolers, which maximize utilization of outside cold air and rapidly decrease the power consumption (up to 30 kW). -------------------- Offered price represents VWT-FFS-3672 /3.6m , double loop technology ,FOB Cz Praha 20x22ft containers
The seller offers for purchase copper powder of chemical purity 99.99%. Isotopic composition Cu(63)=69.1%, Cu(65)=30.9%. Copper powder is packaged in a plastic bottle of 2 kilograms and a plastic box of 20 bottles. The powder can be stored in glass vacuum ampoules. The product was manufactured in the Russian Federation. The product is located in Germany and Russia. The material is available for review. The cost of 1 kilogram of copper powder is 350 euros (excluding medical expenses and insurance). Minimum order quantity 520 kg (maximum 2 tons per month, contract for 12 months) Payment term: prepayment of 100% of the Seller's invoice amount after verification at the Seller's specified warehouse. The set of documents will include: - certificate of chemical purity; - invoice - check Procedures (Highlights): (Full details of procedures are available from the FCO): 1. Letter from the buyer (addressed to the seller) 2. Buyer's CIS. 3. FCO from the Seller and accompanying documents. 4. Check by the Buyer at the Sellerâ??s warehouse (if necessary). 5. Payment 6. Transport (if necessary)
