VivaDiag Pro SARS-CoV-2 Ag Rapid Test
396.000 pcs in stock in Prague. This is repeated every week. On order can be unlimited pieces.
25pcs in box
PRICE DEPEND ON QUANTITY IN ALL CASE WE CAN MAKE BEST PRICE FOR YOU.
CE 1434
REF VCD16-01-011
Manual IFU ENG, DE, PORTUGAL, FRANCE, CZECH, GREECE, ITALIAN
Photos, documents and video can be sent. Please contact me.
Now in stock 42.400 boxes per 100pcs in
Every week comes 2 trucks 22.500 pcs 1 truck
Color Blue
Sizes
S - 10%
M - 40%
L - 40%
XL - 10%
CE 2777, EN ISO 374-1:2016, A1:2018 Type C, EN ISO 374-4:2019, EN ISO 374-5:2016
Photos, documents and video can be sent. Please contact me.
MD FONSCARE Nitrile disposable gloves comply with the requirements of European Directive 93 42 EEC on medical devices and European Directive 89 686 EEC on personal protective equipment, as amended.
MD FONSCARE Nitrile disposable gloves provide limited protection against chemical or ionizing radiation PPE category III, as well as against microorganisms and agents that cannot cause irreversible skin damage PPE category II and against minimal risks PPE category
Natural Zeolites, Polymer Raw Materials
Natural Alkaline Spring Water And Canned Beverages, Plastics And Metal Packaging Raw Materials And Petroleum Product.
I m2 ex d i, ii 2gd ex d td a iib t3-t4t tmax. Surf. Ip 65 ex.
Technical description: luminaire consists from body, basic plate and
Flange with protective glass. Body and flange are castings from grey cast
Iron treated with polyester powder paint. Luminaire can be suspended
By the steel pendant with 2 eyes o 18 mm on the upper part of the
Body. Connecting area (increased safety „d“), with connecting clamps and
2 cable glands, is placed on the side of luminaire. Flange cable glands
No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16
Mm (no. 3-99.6170/1 for o 16 – 20 mm optionally). Area is enclosed
With cover from grey cast iron. Steel basic plate with electric parts
And reflector is fixed in the body. Flange with glass cover is screwed
In the body and secured with locking screw and silicon sealing
Against unlocking, thread shapes a rift of flameproof enclosure „d“.
Protective hardened glass resistant against mech. Shock min. 7 j is
Fixed to the flange, the connection is filled with polyurethane putty.
A steel hinge is fixed to the flange as the mobile one and enables to
Hang the flange during mounting or dismounting. Steel parts are
Galvanized and chromated. Luminaire is equipped with protective guard from steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases. Luminaire is equipped with 2 inner and 1 outer earthing clamps for conducting connection. Luminaire is designed as the through-way one for 4-core cable; when used as the end piece, there is necessary to use blinding plug (optionally on order). Packing carton is filled with polyurethane foam instapak.
Luminous sources:
Spc 300 and 500w, with ballast box hql 250w, 400w, nav-e 210, 350w
2G Ex de IIC T3-T6 Gb
II 2G Ex t IIIC Tmaxsurf.-table Db
Technical description: Luminaire consists of body, basic plate and
flange with protective glass. Body and flange are castings from AlSi alloy.
Steel hinge with eyes o 18 mm is fixed on the upper part of the body.
Connecting area (increased safety „e“), with connecting clamps and 2
cable glands HSK-K-Ex M25x1.5 for cables o 9 – 16 mm (HSK-M-Ex for
cables 10 – 16 mm for versions F), is placed on the side of the body. This
area is covered with cover and sealed with silicon. Steel basic plate with
electric parts and reflector is fixed in the body. Flange with protective
glass is screwed into the body and secured with securing screw against
unlocking; the thread creates a rift of flameproof enclosure „d“. Protective
cover from hardened glass is resistant against mechanical shock min.
7 J and is fi xed in fl ange; the connection is filled with a putty (polyurethane
glue). Steel mobile hinge is fixed on the flange and enables to
hang up the flange under body during mounting or exchanging light
source. AlSi parts of luminaire are treated with polyester powder paint;
steel parts are galvanized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting
terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and
1 outer earthing clamps. Luminaire is designed as through-way one. When it is used as the end piece, there
is necessary to replace one cable gland with blind screw V-Ex or to blind one unused gland with blind plug
HSK-V-Ex (versions F: one cable gland must be replaced with blinding screw V-Ms-VMQ-Ex). Blinding parts
are not attached - delivered optionally on order only. Versions K are equipped with protective guard from
steel wire. All types can be equipped with lampshade (optionally on order only). Packing carton is filled with
polyurethane foam Instapak
luminous sources:
HWL 500W E40, SPC A T CL 250W E40, HQL 250W E40, NAV-E350 350W E40 and other.
NOTE ! Ballast box 205.1 can be used for HP Mercury and sodium lamps..
Nitrile gloves (9.2 eur box of 100), hazmat suits (1.98 eur piece), syringes (6.15 eur box off 100) medical protective equipment, face masks, medical coveralls.
Compact detector from new series, which substitute type DEGA 03,.Serves to one- or two- Level signalization of detected gas concentration in guarded area. Its construction, kind of installation and service is designed for use in smaller business, boiler rooms, garages etc.. Detector used semiconductance sensor, which transforms change of concentration of detected gas at change of electrical resistance.Exceed of pre-set limits is signalized optical, acoustic or with internal siren and switch of potential-free relays contacts. It ś possible to energize device with system voltage 230 V AC, 12 or 24 V DC.
Technical description: luminaire consists from body, basic plate and flange
With protective glass. Body and flange are castings from grey cast iron treated
With polyester powder paint. Steel pendant with eye o 18 mm is fixed to the
Upper part. Connecting area (increased safety „d“), with connecting clamps
And 2 cable glands, is placed on the side of luminaire. Flange cable glands
No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 mm (gland
No. 3-99.6170/1 for cable o 16 - 20 mm). Area is enclosed with cover from
Grey cast iron. Steel basic plate with electric parts and reflector is fixed in the
Body. Flange with glass cover is screwed in the body and secured with locking
Screw and silicon sealing against unlocking; thread shapes a rift of flameproof
Enclosure „d“. Protective hardened glass is resistant against mech. Shock min.
7 j and is fixed in the flange, the connection is filled with a polyurethan putty.
A steel hinge is fixed to the flange as the mobile one and enables to hang
Up the flange during mounting or dismounting. Steel parts are galvanized
And chromated. Luminaire is equipped with protective guard from galvanized
Steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting
Terminal block enables interchanging 2 phases (4-core cable). Luminaire
Is equipped with 2 inner and 1 outer earthing clamps for conductive connection.
Luminaire is designed as the through-way one, when used as end piece, there is
Necessary to use blinding plug (optionally on order). Packing carton is filled with
Polyurethane foam instapak.
Luminous sources:
Hwl160 w e27, dulux d26 w g24d-3, bulb100w/220 e27, nav-e 110 w e27, hql125 w e27, nav-e 50/l 50 w e27, hql 80 w e27, clas 200 w e27, master pl e 23 w e27 and next
2G Ex de IIC T4-T6 Gb
II 2G Ex de IIC T4-T6 Gb
II 2D Ex t IIIC T max.surf Db
Luminaire consists of body, basic plate and
flange with protective glass. Body and flange are made of AlSi alloy
treated with polyester powder paint. Luminaire can be suspended
by the help of steel pendant with eye o 18 mm. The connecting area
(increased safety „e“) is placed on the side of the body and equipped
with connecting clamps and 2 cable glands HSK-K-Ex M25x1.5 for cables
o 9-16 mm. Area is enclosed with cover and sealed with silicon. There is
aluminium basic plate with electro-module mounted inside the
luminaire. Electro-module consists of 20 x LED CREE XP-G (luminous
flux 4000 lm, lumen per watt 88 lm/W, colour temperature 3700-5000,
Colour Rendering Index ~80, guaranteed life-time min. 50.000 hrs.) and
cooling unit. Input of the luminaire is adjustable (45W/22,5W) by changing
output current of the LED driver 700mA/350mA. Flange with protective
glass is screwed in the body and locked with securing screw; thread
shapes a rift of flameproof enclosure „d“. Protective hardened glass is
resistant against mech. shock min. 7 J and is fixed in the flange; the connection
is filled with polyurethane putty. The mobile steel hinge is fixed to
the flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw V-Ex or to blind one unused cable gland with blinding plug HSK-V-Ex. The blinding parts can be delivered on order optionally. Versions K are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam Instapak.
luminous sources:
EcoClasik 140W E27, CLAS 200W E27, DULUX D26 W G24d-3, Bulb100W/220 E27, NAV-E 110 W E27, HQL125 W E27, NAV-E 50/l 50 W E27, HQL 80 W E27, Master PL E 23 W E27 and next.
Luminaire consists of body, basic plate and
Flange with protective glass. Body and flange are made of alsi alloy
Treated with polyester powder paint. Luminaire can be suspended
By the help of steel pendant with eye o 18 mm. The connecting area
(increased safety „e“) is placed on the side of the body and equipped
With connecting clamps and 2 cable glands hsk-k-ex m25x1.5 for cables
O 9-16 mm. Area is enclosed with cover and sealed with silicon. There is
Aluminium basic plate with electro-module mounted inside the
Luminaire. Electro-module consists of 20 x led cree xp-g (luminous
Flux 4000 lm, lumen per watt 88 lm/w, colour temperature 3700-5000,
Colour rendering index ~80, guaranteed life-time min. 50.000 hrs.) and
Cooling unit. Input of the luminaire is adjustable (45w/22, 5w) by changing
Output current of the led driver 700ma/350ma. Flange with protective
Glass is screwed in the body and locked with securing screw; thread
Shapes a rift of flameproof enclosure „d“. Protective hardened glass is
Resistant against mech. Shock min. 7 j and is fixed in the flange; the connection
Is filled with polyurethane putty. The mobile steel hinge is fixed to
The flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw v-ex or to blind one unused cable gland with blinding plug hsk-v-ex. The blinding parts can be delivered on order optionally. Versions k are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam instapak.
Carton 410 cm x 240 cm x 240cm ,
Weight 10 kg/pc
44 Boxing Head Guards Suppliers
Short on time? Let Boxing Head Guards sellers contact you.
