Production description 1.Crane rolling drumis the component to wind wire rope in the lifting mechanism. 2.Crane rolling drumconsists of drum shaft, flange type annular gear, drum hub, bearings, and bearing pedestal. 3.When one end of drum is equipped with the switch of rotary type position limiter, it must ensure to make drum shaft and rising limit switch rotate synchronously
Introduction Double girder gantry crane is heavy gantry crane with double girders, which is widely used for general purpose. Double girder gantry crane are heavy duty crane, used at indoors and outdoors places where overhead crane�runways are not practical. The lifting capacity of the double girder gantry crane is 5 to 500 tons. The working class of the gantry crane is A5 and A6. Application of Double Girder Gantry Crane: Double girder gantry crane is usually used to open warehouse or along rail for general material handling and lifting work, such as, freight yard or dock, etc.
Features of electric hoist double girder overhead crane 1.Double girder structure makes the crane bridge have sufficient strength, rigidity, and stability. 2.Rail-in-middle box girder design thoroughly meets the requirement to strength, rigidity and stability. 3.End beams designed with simple structure can be easily installed with main beam by high-strength bolts. 4.CD or MD high quality wire rope electric hoist is used as lifting mechanism. 5.Soft starting motors with light current are used with ground control. 6.Dual-motor independent drive device is adopted to reduce the wear of rail gnawing and reduce the possibility of wheel climb off track fault, etc. 7.Motor is directly controlled by contactor, which can make the motor achieve single and double speed and reversing control. 8.Frequency converter is used to change the frequency and voltage of motor power to realize the function of speed adjustment control of motor. 9.Multiple safety protection system is adopted, including short circuit protection, no-voltage protection, emergency power off switch protection, overload limit protection, travel limit protection, zero and chain protection, ground protection, etc.
Jib cranes are the optimal lifting equipment for short transfer applications. Dongfeng cranes can provide you the wall travelling jib crane, pillar jib crane and wall mounted jib crane, etc. Dongfeng cranes jib cranes can lift and transport materials in semi circles or full circles around their support structures to provide localized material handling in work cells, to supplement a large overhead crane system, to transfer materials from one work cell to another, and to lift a line load up to the rated capacity safely.
Product Description: MRT expressway interchange bridge girder segmental launching gantry crane manufacturer China is generally used in the erection of the Highway Bridge and Subway Bridge, using the precast segmental pre-stress concrete box beam (PC beam) assembly. The main feature of MRT expressway interchange bridge girder segmental launching gantry crane manufacturer China is the high efficiency of construction and self-traveling. Generally it is composed of the main beam, leg and winch trolley, the main girder is used for bearing, the leg is to execute machine transverse moving, longitudinal moving, leveling, support, cross span, cross scale and other functions, and the winch trolley used for lifting the precast girder Our Company: Huada Heavy Industry is a big enterprise specialized in researching, developing, producing and exporting. Huada Heavy Industry have more than 600 stuff, and covers 200,000 square meters. Our advantages: A. More than 50 R&D personnels with advanced Science and technology B. More than 400 sets advanced Production processing equipment and inspection equipment C. Independent intellectual property rights to develop energy saving bridge cranes, gantry cranes, and electric hoist E. Obtain ISO 9001 certificate and more than 10 series of patent certificates F. Efficient service and competitive products G. Export more than 100 countries Packing 1. Electric and hydraulic parts are packed by high quality plywood crate to reduce distortion in conveying; 2. Main beams, end beams are packed by plastic woven cloth. It can reduce abrasion when transport. Delivery 1.If the size of MRT expressway interchange bridge girder segmental launching gantry crane manufacturer China are suitable for container ship, usually by container; 2.If the size is too big, usually by bulk ship or by container after disassembly. Transport ways are based on reducing cost for you and keep the crane performance. Transportation Generally 35 days to 50 days to destination port. Safty features: Huada launching gantry (LG) Series are designed for safety. Winches are equipped with double breaking system. Upon request we provide Triple breaking system. Emergency stop button, Limit switch, sensor are located at designated location. Lighting and spare-parts are part of the items coming with MRT expressway interchange bridge girder segmental launching gantry crane manufacturer China. FAQ: 1.Whatthe information should I provide when inquiry about the MRT expressway interchange bridge girder segmental launching gantry crane manufacturer China a .we need the Bridge Drawing; the Maximum longitudinal slope and the Maximum Transverse slope; b. The Girder/beam drawing;
Riggerte XiamenForklift Attachment is a professional manufacturer of forklift attachments. With a 2000 square meters workshop,Riggerte mainly produce paper roll clamp,bale clamp,carton clamp,drum clamp,rotator,push pull,foam rubber clamp,fork clamp,fork positioner and so on. Custom service is totally available for customers.
Product Description 450 ton MRT launching gantry machine beam erection with hydraulic system is generally used in the erection of the Highway Bridge and Subway Bridge, using the precast segmental prestress concrete box beam (PC beam) assembly. The main feature is the high efficiency of construction and self-traveling. Generally it is composed of the main beam, leg and winch trolley, the main girder is used for bearing, the leg is to execute machine transverse moving, longitudinal moving, leveling, support, cross span, cross scale and other functions, and the winch trolley used for lifting the precast girder. Delivery time Within 30 to 40 working days after the receipt of deposit. Transportation Generally 35 days to 50 days to destination port
Detailed Description: Segmental overhead and underslung launching gantry is whole span box girder segment erection construction equipment, simple structure, convenient usage, can greatly improve the construction efficiency. 1. of the main girder of bridge erecting machine with super imposed box girder structure, high stiffness, small deflection. 2. the main structure uses the symmetrical design principle. 3. the segmental overhead and underslung launching gantry can carry out two-way construction, and can adapt to the bridge beam feeding and tail beam feeding in two conditions, strong adaptability. 4. this segmental overhead and underslung launching gantry operation has the advantages of simple structure, convenient use. Parameter Details: Feature:Gantry Crane Condition:New Rated Loading Capacity:1600t Rated Lifting Moment:16000kn Max. Lifting Load:1600t Max. Lifting Height:560m Span:50m Package: 1. Electric parts of segmental overhead and underslung launching gantry are packed by high quality plywood crate, to reduce distortion in conveying; 2. Main beams, end beams and electric winch are packed by plastic woven cloth. It can reduce abrasion when transport. Delivery: 1. If the size of whole crane are suitable for container ship, usually by container; 2. If the size is too big, usually by bulk ship or by container after truncation; 3. Transport ways are based on reducing cost for you and keep the crane performance! Our Company: Huada Heavy Industry mainly produces Shipbuilding box type double girder 50t gantry crane, beam launcher, movable scaffolding system crane, form traveller, segmental overhead and underslung launching gantry, straddle carrier, tyre transportor, beam trolley, portal crane and electric winch, electric hoist and all kinds of accessories, which widly cover machinery, metallurgy, electric power, railway, water conservancy, ports, terminals and other industries. Our advantages: -More than 50 R&D personnels with advanced Science and technology. -More than 400 sets advanced Production processing equipment and inspection equipment -Independent intellectual property rights to develop energy saving bridge cranes, gantry cranes, and electric hoist -Obtain ISO 9001 certificate and more than 10 series of patent certificates -Efficient service and competitive products -Export more than 100 countries
JM model wire rope electric winch(windlass), most of time, follow-operated by people on the ground, also can operate in the room, or operate with wireless type with far way, except exclusive-use, also can match-use with electric trolley and plain trolley, geared trolley, these trolleys with simple structure, light weight, easy to load and unload, can use like this forever, but also can be used temporarily,It is widely used in port, workshop, warehouse, construction and many kinds producing-line, so is necessary equipment for lifting goods, raising labor efficiency, improving working conditions. JM model wire rope electric winch has slow hoisting speed, it is used for hoisting and unloading the weight materials, such as all kinds of large and middle concrete constructure of steel, installation and disassembly of mechanical equipment. it is suitable for construction and installation engineering of constraction, mining area, factory and so on. The standard capacity of electric winch: 1t, 1.6t, 2t, 3.2t, 5t, 6t, 8t, 10t, 12.5t, 13.5t, 16t, 20t, 25t, 32t, 50t, 65t. The Max. rope length reach to 1500m.
Gantry Crane for Project is ideal for outdoor applications where lifting facilities are provided without the cost of a building or any supporting steel work. They are also suited to indoor applications where existing building structures are not suitable to take overhead cranes, Hengyuan can be constructed with a cantilever to allow handling outside the rail centers. specification: 1.Lifting capacity up to 900on 2.Span is 20m to 100m 3.Lifting height up to 100m 4.Working class: ISOA5-A7/FEM2M-4M 5.crane traveling mechanisms are operated in the driver cabin or remote control Mechanical: 1.Double box beam with steel legs moving through the ground beam as crane travelling system 2.The camber of main beam will be designed as Span*1-1.4/1000. 3.Steel Material: Q235 or Q345 4.Shot-blasting Sa2.5 for main girder and supporting beam 5.Epoxy zinc rich high quality painting. 6.Electrification and outfitting 7.Brand: CHINT SIEMENS Schneider 8.Conductor power supply: Cable Reel or busbar. 9.Frequency conversion, double speed, single speed, and All hoist and crane movements are independent an d can be run simultaneously different design duo to meet crane applications 10.Whole layout provides good protection against special working environment. Such as gas workshop
Application It is used for tower erection,pole setting,stringing wire in electrical power line construction. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. Features 1. small size & compact structure. The machine is now supported by gasoline engine, diesel engine, electric or imported gasoline engine. 2. light weight. For example, the weight of 3 ton gasoline engine powered winch is 88 kgs. Equipped with diesel engine or motor, the winch is 108 kg. Equipped with imported gasoline engine, the winch is only 82 kg, which is very convenient transported. They are especially suitable for line construction in water area and mountain. String machine equipped with a small capstan, can also be used for a vertical rod, wire. One machine with two function in the wildfield helps to reduce crop losses. 3. high efficiency. It reduces the labor intensity, improves working efficiency with less operators and convenient field command. 4. safe and reliable. The machine has the interlocking brake device, accurate positioning, excellent braking performance , flexible usage, safety and trust. 5. widely used. According to customersâ?? response and field investigation, this machine has wide usage, such as rod up, a vertical rod, the pull rod, line release, line reel, the bridge plate traction, lifting and other purposes.
ondition: New Place of Origin: Jiangsu, China (Mainland) Brand Name: TXK Power Source: Electric Certification: CCC CE ISO SGS Warranty: 12 Months Color: Yellow, Red, Orange and Blue Voltage: 24V/36V/48V Power supply: 110-690V 50/60Hz Three-phase
The Brief Introduction of gantry crane Light duty 3000 kg gantry crane is used together with CD, MD type electric hoist, It is a track travelling small and medium-sized crane, the capacity of crane from 5T to 32T, the span of crane from 12m to 30m, the working temperature within-20--+40 centigrade. This type crane is a regular crane widely used at open ground and warehouses.unload or grab material. It has 2 controlling methods.namely ground controlling and room controlling. (1) The Feature 1. the design and manufacturing of the rail Traveling single beam gantry crane is in accordance with the Chinese standard. 2. The work duty of the single beam electric hoist gantry crane is M~M5 3. the operation way can be choice: cabin control, remote control or pendant on the ground. 4. the main beam of the single beam electric hoist gantry crane is box-shape 5. the span and lift height of the single beam electric hoist gantry crane should be designed by the users' requirements 6- working temperature is -25C to 40C
1.Introduction This crane mainly consists of strong bridge beams, trolley-travelling mechanism, crab and electric appliances, and could be classified into several working duties, e.G. A5, a6, a7, according to the working frequency and pure working time. 2.Control method Remote control, pendent line with push button , cabin control 3.Design and construction rules All the standards required for the crane is according to china standards. 4.Painting Primer and finishing paint Color:according to your requirements Average thickness:about 100microns 5.Standard capacity 5tons, 10tons, 16/3.2tons, 20/5tons, 32/5tons, 50/10tons, 75/20tons, 100/20tons, 100/30tons, 125/30tons, 150/30tons, 160/32tons, 200/50tons, 400/80tons, 560/250tons.
Product Description Ladle Overhead Crane They are widely used in the smelting industry to convey, pour and charge the liquid hot metal in the process of smelting, and the lifting capacity of the ladle overhead crane is from 5 to 74 tons. QDY overhead crane with hook foundry utilized for medium to heavy fabrication. These overhead cranes are ideally suited to casting factory. ladle cranes are used to move steel or iron ladles in steel smelting workshop with high temperature and a lot of dust.Corrventional scheme:using the closed cab. Customize service 1,Supplying design drawing for freely. 2,We could make door to door service.(cutorms clearance and transport in overseas) 3,Providing guide installation and commissioning. 4,Maintained for two years.(Detail maintained plan). Other products of this series 1, QD double trolley overhead crane 2. QC overhead crane with magnet 3. QZ overhead crane with grab 4.QDY overhead crane
1)brief specification Lifting capacity: 30t Span: 10.5m-31.5m (non-standard design can be made) Working class: a5~a6 Working temperature: -25c to ~40c Voltage : 380v 50hz 3-phase 2)structure The magnet overhead crane has slewing telescopic electromagnetic carrier beam; is applicable to th fixed span at indoors or outdoors of steel mill shipyard port yard and storage etc. The magnet overhead crane is used for loading unloading and carrying steel plate, profile steel, and spool etc, the magnet overhead crane is especially applicable to lift material of different specifications and which needs horizontal rotation. The spacing of electromagnet can be adjusted electrically and magnetic force of electromagnet can be adjusted through infinitely variable control according to the specifications(different thickness, length and pieces, etc) and eight of the lifted materials the followings can be supplied according to the users requirements: speed governing(1: 10or larger) of the mechanisms, overload& warning, remote control, plc control, failure detection, display, record and printing system etc, (the data below is used for indoor) Safety features: Overload protection: if the materials or electric current overstep the capacity, the crane will give a sharp warning for protection itself. Emergency brake: if theres emergency situation, it could stop the crane to protect operator and goods. Control method: room control or remote control to avoid any injure to the operation staff. Main lifting motor: with thermal protection and currency protection. Hooks with latch:to prevent goods fall down;
Nucleon electric monorail grab crane for bulk cargo This electric monorail grab crane is used with monorail electric hoist crane, relying on the hoist traveling to finish the transporting and loading working, it could open and close and travel during the lifting and lowering process; Features: 1. Easy operation, reliable performance, high working efficiency, thus widely used in port, construction plant, workshop, coal plant, storage yard, and other places; this grab could be gtound control, cabin control, or wireless remote control. Clamshell grab list we could offer: 1. Four rope clamshell grab 2. Two rope clamshell grab 3. Electric monorail clamshell grab 4. Single rope suspension clamshell grab 5. Electric motor clamshell grab 6. Stainless steel clamshell grab 7. Electric hydraulic double clamshell grab 8. Electric hydraulic multi clamshell grab 9. Four rope/six rope six-clamshell grab 10. Electric motor multi-clamshell grab 11. Scissor type clamshell grab 12. Rope type rectangular clamshell grab 13. Rope type leak-proof clamshell grab 14. Wireless remote control clamshell grab 15. Dredging clamshell grab 16. Wood/timber clamshell grab 17. Electric hydraulic rectangule clamshell grab Order notice: Please inform us the volume of grab, bulk material density, the crane capacity, and other special requirement you need when you make a request of our grabs, we welcome your customization and we promise to offer you the suitable design and reasonable price, thus to estabish long term cooperation.
General description: Wall mounted jib crane is a new generation of hoisting equipment developed to meet the requirement of modernized production in side workshop or house. It is wall mounted type which is suitable for short distance, frequent and intensive hoisting operations, with such features as high efficiency, energy frugal, labor saving, occupying less space, easy operating and maintenance, etc. Specific details: 1.Loading capacity: 0.5~2ton ; 2.Lifting height:3~20m ; 3.Jib length:2~10m; 4.Slewing degree:0~180 5.Power supply:220~440v, 50/60hz, three phase or customized design. Application: 1.Factory, workshop, warehouse, store; 2. Logistic, dock, port , freight yard ; 3.Construction building, mine, etc. Advantage and feature: 1.Installation with high strength bolt connection; 2.Convenient in operation, safe and turn to flexible; 3.Low noise, commodious cabin and good looking; 4.High quality and efficiency, competitive price; 5.Reasonable and simple whole structure, light self-weight, conform to the state standards; 6.Inexpensive handling systems doesn't require modification of the building structure around.
Feature:Tower Crane Condition:New Application:Construction Rated Loading Capacity:12T Rated Lifting Moment:2500KNm Max. Lifting Load:12T Max. Lifting Height:235mSpan:3-72m Place of Origin:Shandong, China (Mainland) Brand Name:Katop Model Number:TC7032-12 Certification:CE ISO Warranty:12 Months Power Supply:380V 50Hz/440V 60Hz Slewing Speed:0-0.8r/minTip load:3.2Ton Mast Section Size:2*2*3mTotal Power:100kw Trolley Speed:0~65m/min Free Standing Height:55.6m Counter Weight:21.72T After-sales Service Provided:Engineers available to service machinery overseas
Double girder overhead hoist crane features 1) capacity: 5 , 32/10t 2) span: 7.5 , 31.5m 3) lifting mechanism: cdi/md1 hoist/trolley 4) low noise, commodious and good view cabin 5) convenient maintenance, excellent exchangeability for parts and components 6) saves electricity 7) operating environment: -25 degrees~40 degrees 8) steel track recommended:38kg/m or 43kg/m Application The product is widely applicable in factory , warehouse , logistics etc. Safety features: 1.Overloading protection 2.Top quality long time bearing polyurethane materials buffer 3.Crane traveling and cross limit switch 4.Voltage lower protection function, reduce energy consumption 5.Main lifting motor with thermal protection 6.Hooks with latch 7.Rubber buffers 8.Protective earthing 9.Sub-assembly characteristic are tested before assembly 10.Emergency stop system, current over-load protection system, excellent exchangeability for parts and components.
