Weighing platforms used predominantly in heavy industry are light industry equipments which are produced for various types and sizes for the purpose of providing convenience and practical solutions in accordance with the needs of customers.
Platform design; according to the customer's direction and location, according to the climate conditions, according to the material type, the load to be used, the business lines to be used, the corrosion and resistance to be exposed.
They are products that are used only for the purpose of cargo handling, manufactured in accordance with the standards and are indispensable in carrying the safe cargo.
These hydraulically produced machines are used to dispatch many level differences in the fields, such as factory floors, garages, hospitals and so on, to ensure inter-fold material transport.
This type of machine does not require deep wells and machine room, so it is more economical than standard elevators. Hydraulic load lifting machines are manufactured and assembled in a shorter time than other lifts. Also, as with other elevators, there is no need for frequent maintenance.
* 100 kg to 10.000 kg capacity and 12 m height can be manufactured
Vehicle lifting platforms are designed to transport vehicles between different levels of building floors. Today, parking problems, which are the most important distresses of big cities, have begun to suffer as much as they can with car owners. Where concrete ramps are not available for access to the parking lot, vehicle platforms are the most convenient and practical solution for transporting vehicles between floors.
Geared Monorail Travelling Trolley
Travelling Troley
Side View
Front View
Dimensions, Weight and Performance Data
Push
500
Push/Geared
Geared
Geared
Capacity
kg
1000
3000
5000
10,000
Inside of wheel flanges mm
Range 1
50-130
58-150
90-160
110-150
140-170
Range 2
140-200
150-210
160-220
160-210
180-210
Range 3
210-305
210-305
220-305
215-265
215-245
A Seat of susp, plate to runner tread
Range 1 & 2 mm
75
89
110
84
137
Nominal 1.5 mm clearance to be allowed from edge of track flange to inside of wheel flange (3 mm overall on both side)
Overall width of geared travel trolleys - J + (1/2 x track width) + G. On 500 to 2500 Kg. units when using the narrower track widths the cross bolt adjusting washers are to be assembled such that the end of the cross bolt is clear of the hand chain wheel.
Weight of trolleys only exclude hand chain. Hand chain is 0.45Kg/m per linear length up to and including 2t capacity.
Bottom of hand chain loop is 460 mm from ground level.
Pusher bar fixing holes provided in all models.
Anti-tip stop fitted to all hand geared versions.
Buffers available as on option.
Model
HSH 3/4
HSH 1-1/2
HSH 3
HSH 6
Capacity
ton
0.75
1.5
3
6
Lift
m
1.5
1.5
1.5
1.5
Test load
ton
1.125
2.25
4.5
7.5
Min. distance between hooks:
mm
303
365
485
600
Pull on lever to lift full load
kgf
20
21
33
35
No. of load chain falls
mm
1
1
1
2
Diameter of load chain
mm
6
7
10
10
Length of lever handle : D
mm
290
410
410
410
Dimensions mm
A
139
174
200
200
B
84
108
115
115
C
153
160
185
230
Net weight
kg
7
11
20
30
Multipurpose, Portable, Universal, Gearless, Hand operated Pulling and Lifting machine, Supplied complete with telescopic, operating handle and standard Length of super flex steel fibre-mixed core wire-rope fitted with Hook or Shackle at one end and fused and tapered at the other end.
Pulling & Lifting Machines Hy-Tack XL Series 2005
Technical Specifications
HT-7
HT-13
HT-20
HT-35
HT-58
Dimensions (Approx.)
515 x 265 x 110
600 x 360 x 155
620 x 360 x 155
720 x 400 x 160
810 x 465 x 190
Capacity (SWL) (kgs) Lifting, Pulling
750, 1250
1600, 2600
2000, 3000
3200, 5200
5000, 8000
Length of Telescopic operating handle (Approx.)
54/72 cm
66/104 cm
70/130 cm
79/118 cm
120/145 cm
Effort at full load (Approx.) kgs
40
50
50
60
70
Rope travel per Return stroke (Approx.) mm
40
55
50
36
30
Diameter of wire Rope (mm)
8.0
11.3
12.0
16.3
20.0
Standard Length with Each machine (meters)
10
20
20
10
10
breaking Load of wire rope (Approx.)
4.5 Tons
9.0 Tons
10.0 Tons
18.0 Tons
24.0 Tons
Exclusive Features
Casing:
Made from CRC sheet (Galvanized) or Graded Aluminium for
light weight a high factor of safety.
Jaw:
Made from Special Alloy Steel, Accurately Machined, so as
to avoid slippage of wire rope.
Jaw Limits:
Are made from special steel & heat treated for greater strength.
Hooks / D-shackles:
Fitted with Alloy steel Forged Hooks or D-shackle to make
it feasible to be able to fit it at any place.
Wore Ropes:
Super flex Steel Fiber -mixed are, manufactured as IS. 226.
Accepted & Widely used by
Railways
Mines and Quarries
Navigator
Electricity Board’s
Dockyards
Road Transports
Heavy Industries etc.
Increase of Pulling and Lifting Power:
Lifting - machine anchored above load
QDY bridge foundry crane with hook is mainly used at the place where the molten metal is liftedThe working class of the complete machine is A7,and thermalprotective coating is added at the bottom of the main girderThe assembling and test of the crane conform to the document No.ZJBT[2007]375 which was issued by General Administration of Quality Supervision,Inspection and Quarantine of the PeopleS Republic of ChinaThe place where molten nonmetal material and red-hot solid metal is lifted also can refer to this document
The KBK flexible suspension crane is constituted by KBK track, electric chain hoist and installation components. The KBK suspension crane can be a very simple equipment with 2 straight rails, also can be very complex suspended monorail system. KBK flexible suspension crane has simple operation of manual operation also has complex operation such as automatic system operated by compute integrated control.
QDY bridge foundry crane with hook is mainly used at the place where the molten metal is liftedThe working class of the complete machine is A7,and thermalprotective coating is added at the bottom of the main girderThe assembling and test of the crane conform to the document No.ZJBT[2007]375 which was issued by General Administration of Quality Supervision,Inspection and Quarantine of the PeopleS Republic of ChinaThe place where molten nonmetal material and red-hot solid metal is lifted also can refer to this document
It is known that swaying is a big problem for safety and efficiency operation of overhead cranes and gantry cranes. To this end, Yuntian develop advanced crane anti-swing control system for the cranes through the establishment of the precise load swing movement mathematical model. This anti-swaying system of cranes controls the traveling speeds of the crane and trolley to eliminate load swing by 95%.
Casting Crane is one of the main equipments in the continuous casting technology of steelmaking. It is mainly used for pouring melted iron from additive bay of converter to converter; lifting molten steel from refining bay to refining furnace or lifting molten steel from molten steel bay to ladle turret of continuous casting machine.
LDA Sinlge Girder Overhead Crane is widely used in plants warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive or corrosives environment. LDA Sinlge Girder Overhead Crane has two operational methods, ground or operational room which has open model and closed model and can be installed on left or right side according to the practical situation. And the direction of entering the gate has two forms, sideway and ends in order to satisfy the users' Choice users' different conditions.
Single girder cranes are a type of overhead crane that are common in production, engineering and many other workplaces as they cater to practically any lifting application.
7102 Cranes Lifts Suppliers
Short on time? Let Cranes Lifts sellers contact you.
