EP conveyor belt Polyester conveyor belt, , also called EP or PN conveyor belt, whose tension resistant body is canvas woven by polyester in warp and polyamide in weft.The belt has the characteristics of low elongation in warp and good trough ability in weft, good water resistance, good wet strength, suitable for medium, long distance and heavy-load transportation of materials.Because of the high initial modulus of polyester, the belts can choose a relative low safety factor.Specification Availability:Carcass Fabric structure Type No. of plies Cover thickness   (mm) Belt width   (mm) Warp Weft Top Bottom EPPolyesterNylon-66EP802-63.0-18.01.5-10.0300-5000EP100EP125EP150EP200EP250EP300EP350EP400EP500We could offer belt with cover grade in accordance to International standard such as DIN 22102, RMA, AS 1332, SABS 1173/2000, IS 1891, BS 490, JIS K 6322, etc.Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply DIN 22102 Mpa % mm3 N/mm      (?¤1.5mm) N/mm      (>1.5mm) N/mm DIN 22102-Z153502503.54.55DIN 22102-W18400903.54.55DIN 22102-Y204001503.54.55DIN 22102-X254501203.54.55Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply AS 1332 Mpa % mm3 N/mm      (1.9mm) N/mm      (>1.9mm) N/mm AS 1332-N1740020044.86AS 1332-M2445012544.86AS 1332-E1430044.86AS 1332-A174007044.86Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply RMA Mpa % mm3 N/mm      (1.6mm) N/mm      (>1.6mm) N/mm RMA-I1740034.44RMA-II1440034.44Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply SANS 1173 Mpa % mm3 N/mm N/mm A184007057C2040015057M2545012057N1740015057
Nylon Conveyor Belt: Nylon is one of the best quality synthetic fibers the rubber industry uses nowadays.The nylon canvas is woven by nylon fabric both in warp and in weft.It is the most widely used fabric in rubber industry, and its outstanding merits are its high abrasion resistance, high tensile strength and good fatigue resistance.Conveyor belt with nylon canvas inside has the characteristics of thin belt body, high tensile strength, good shock resistance, good trough ability, high adhesion between plies, splendid flexibility and long working life.Nylon conveyor belts are suitable for medium, long distance and heavy-load transportation of materials, widely used in mining, metallurgical industry and architectural industry, ports.Specification Availability:Carcass Fabric structure Type No. of plies Cover thickness  (mm) Belt width (mm) Warp Weft Top Bottom NNNylon-66Nylon-66NN802-63.0-18.01.5-10.0300-5000NN100NN125NN150NN200NN250NN300NN350NN400NN500It is suitable for conveying in normal temperature various non-corrosive pointless lumps, granular or powders such as coal, coke, sand and cement in bulk or packaged.We could offer belt with cover grade in accordance to International standard such as DIN 22102, RMA, AS 1332, SABS 1173/2000, IS 1891, BS 490, JIS K 6322, etc.Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply DIN 22102 Mpa % mm3 N/mm  (1.5mm) N/mm  (>1.5mm) N/mm DIN 22102-Z153502503.54.55DIN 22102-W18400903.54.55DIN 22102-Y204001503.54.55DIN 22102-X254501203.54.55Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply AS 1332 Mpa % mm3 N/mm (1.9mm) N/mm  (>1.9mm) N/mm AS 1332-N1740020044.86AS 1332-M2445012544.86AS 1332-E1430044.86AS 1332-A174007044.86Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply RMA Mpa % mm3 N/mm (1.6mm) N/mm(>1.6mm) N/mm RMA-I1740034.44RMA-II1440034.44Standards Cover Rubber Adhesion Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply SANS 1173 Mpa % mm3 N/mm N/mm A184007057C2040015057M2545012057N1740015057
Features: 1.Modular deisgn. 2.Bottom weighted design improves running stability. 3.Inspection mode and automatic mode. 4.Speed is adjustable. 5.Size is customized. 6.With dual rails. 7.With SMEMA. Product Name CE Standard SMT Transport Conveyor PCB Flat Belt Conveyor With Top Quality Model Max-C608B Dimensions Length*1050*900mm PCB width 50-350mm PCB direction L-R or R-L(optional) Function With touch screen Conveyor speed 0.5-20M/min Power 1P AC 110V/220V 50/60HZ Conveyor height 900±20mm Weight Approx.100Kgs
Features: 1.PLC+LED touch screen control, easy to operate. 2.Use durable rollers for transmission (No need change belts). 3.Three modes of operation:FIFO ( first in first out),LIFO ( last in first out), PASS. 4.Smooth and precise width adjustment (leadscrew). 5.Fast, smooth and precise search and location. 6.Full closed design ensures safety level of operation. 7.Smaller footprint. 8.With SMEMA signal. Product Name Original PCB SMT Buffer Conveyor Systems AOI NG Buffer With Best Price Model Max-MBC608 Dimensions 430*764*1250mm PCB size 50*50-330*250mm Circle time About 10s PCB capacity 25pcs( or customized) Power 1P AC 110V/220V 50/60HZ Power source Max.250VA Conveyor height 900±20 Conveyor direction L-R or R-L Weight Approx.140Kgs
Belt conveyor is a major transmission element of mining facilities. They are manufactured in various widths and lengths according to the capacity and distance that will be transmitted. The belt conveyors can be manufactured in widths of 400-500-600-650-750-800-1000-1200-1400 mm and in desired length. They are driven by belt-pulley-reducer or by engine and reducer coupled directly.
Flexible Conveyor / Roller Conveyor Flexible Conveyor With an objective to lead the way, we are committed to manufacture, export and supply a quality range of Expendable Roller Conveyor. Offered Flexible Conveyor is exactly manufactured using superior grade components and latest technology under the strict guidance of our highly skilled experts as per the set industry standards. The provided Flexible Conveyor is used in several industries for moving big size cartons from one place to another safely. To fulfil the precise needs of clients, we offer this Expendable Flexible Conveyor in different specifications as per their needs at reasonable rates.
Secondary Automatic Return belt Cleaner 1. The tungsten carbide blade with higher wear resistance and longer service life has a good scraping effect on high temperature or sticky materials. 2. Combined design of the blade makes installation and maintenance easy. Each blade equipped with an automatic returning device, and superior for its good noise absorption, vibration relief and tensioning. When the conveyor belt uneven surface, such as vulcanization joints, belt buckles and belt repair surface, passes through the blades, the blades in contact with will subject to a certain pressure from the conveyor belt uneven surface, ejects and evades slightly to the opposite direction of the conveyor belt to protect the conveyor belt. After the conveyor uneven surface passed, the evading blade can get the rebound tension through the automatic returning device, make the blade reattached to the conveyor belt surface to continue to work. 3. The spring adjusting seat design prevent the whole blade set from damaging by instantaneous impacts, and make it easy to install and adjustment. 4. Installed on the working surface of the return conveyor belt at the lower part of the head pulley, suitable for two-way running belt. 5. Suitable for the conveyance of all kinds of materials, such as coal, coke, sinter, salt, iron ore and fertilizer, and widely applied in thermal power plants, iron and steel plants, cement plants, fertilizer plants, coking plants, coal cleaning plants, coal mines, petrochemical plants, mining, paper mills, chemical plants, terminal transfer stations and other industries.
Secondary Automatic Return Belt Cleaner 1. The blade is molded with polyurethane and characterized by high strength, high wear resistance and excellent impact resistance. 2. Combined design of the blade makes installation and maintenance easy. Each blade is equipped with an automatic returning device, and superior for its good noise absorption, vibration relief and tensioning. When the conveyor belt uneven surface, such as vulcanization joints, belt buckles and belt repair surface, passes through the blades, the blades in contact with will subject to a certain pressure from the conveyor belt uneven surface, ejects and evades slightly to the opposite direction of the conveyor belt to protect the conveyor belt. After the conveyor uneven surface passed, the evading blade can get the rebound tension through the automatic returning device, make the blade reattached to the conveyor belt surface to continue to work. 3. The spring adjusting seat design prevent the whole blade set from damaging by instantaneous impacts, and make it easy to install and adjust. 4. Installed on the working surface of the return conveyor belt at the lower part of the head pulley, suitable for two-way running belt. 5. Suitable for the conveyance of all kinds of materials, such as coal, coke, sinter, salt, iron ore and fertilizer, and widely applied in thermal power plants, iron and steel plants, cement plants, fertilizer plants, coking plants, coal cleaning plants, coal mines, petrochemical plants, mining, paper mills, chemical plants, terminal transfer stations and other industries.
Character: Speed is controlled by frequency converter , easy to control and more reliable. 304SS chain which is easy to maintain and long lift. Strong sprocket with running and less noise. Fully enclosed, keeping clean and sanitary.
For powder, conveying to higher hopper, equip with packaging machine, ribbon blender, linear weigher, filling machine. DTC series screw conveyor can be powder or granular plastic materials transported within the hopper is a device-specific color mixer. The contact objects are made of stainless steel, transportation of raw materials not subject to the process of pollution, do not bring any outside objects, enabling the production process to achieve full closure of automation. Easy to install and can be moved, such as multiple spices machine using the same material, just a platform feeder for multiple spices simultaneously feeding machine, eliminating the trouble of artificial feeding, the feeding work has become more secure, less time and more effort.
--Carrying Roller --Return Roller --Impact Roller --Comb Roller --Rubber sprial return roller --Conveyor Roller set --Conveyor Roller Frames --Conveyor pulley --Pulley lagging
EP/ NylonConveyor belt Chevron Conveyor Belt Heat Resistant Conveyor Belt Oil Resistant Conveyor Belt Fire Resistant conveyor belt Sidewall Conveyor Belt Super big width Conveyor Belt (up to 6000mm) Rough Top Conveyor Belt Bare Cover Conveyor Belt Steel Cord Conveyor Belt Rubber Sheet
We are a leading Manufacturer of finish cashew grading machine, cashew kernel grading machine, grading machine, cashew raw grading machine, raw cashew size sorting machine and kaju grader from Surat, India.
European Series Solid Pin Chains European Series Hollow Pin Chains Metric Series (ISO) Solid Pin Chains Metric Series (ISO) Hollow Pin Chains Engineering Class Chains chaincentre.in/products/#conveyorchains
Fabric Conveyor Belt Steel Cord Conveyor Belt Split Guard Steel Cord Conveyor Belt Pipe Conveyor Belt Bucket Elevator Conveyor Belt Chevron Conveyor Belt Sidewall(Flexwall, Raised edge, Corrugated) Conveyor Belt Abrasion Resistant Conveyor Belt Anti-Static Electricity And Anti-Fire Conveyor Belt Fire Resistant Conveyor Belt Heat Resistant Conveyor Belt Oil Resistant Conveyor Belt
Fabric Conveyor Belt Steel Cord Conveyor Belt Split Guard Steel Cord Conveyor Belt Pipe Conveyor Belt Bucket Elevator Conveyor Belt Chevron Conveyor Belt Sidewall(Flexwall, Raised edge, Corrugated) Conveyor Belt Abrasion Resistant Conveyor Belt Anti-Static Electricity And Anti-Fire Conveyor Belt Fire Resistant Conveyor Belt Heat Resistant Conveyor Belt Oil Resistant Conveyor Belt
It was made of aramid ( Kevla) yarn, Can be used in heavy duty load v-belts, agricultural v-belts . It would helping to improve the strength of the belts, lower belt weight, longer the lifetime. And Aramid cord reinforced belts also offer higher resistance to corrosion,heat and flame. Cord Construction:1X3, 2X3,3X3,2X5,4X3,5x3,6X3,6X5, Supply custom-made service as per requirement
HMLS dipped polyester soft cord Dipped polyester cable cord Products Parameter: Linear Density :1100 Dtex Type: HMLS Stiffness Level: Soft, Semi-stiff Additional Overcoating Available: NR,CR,EPDM Cord Construction:1X3, 2X3,3X3,2X5,4X3,5x3,6X3,6X5,9X3,12X3 Supply custom-made service as per requirement Free samples are available Feature : High Performance Fiber Yarn High Strength Low Elongation Low Shrinkage Excellent Adhesion High Fatigue Resistance Match Different Technical Process Application : Automotive V- Belts, Agricultural V-Belts Industrial V-Belts
Dipped Polyester Stiff Cord Products Parameter: Linear Density :1100 Dtex /1670Dtex Type: HMLS / High Tenacity Cord Construction:1X3, 2X3,3X3,2X5,4X3,5x3,6X3,6X5,9X3,12X3 Supply custom-made service as per requirement Feature : High Performance Fiber Yarn High Strength Low Elongation Low Shrinkage Excellent Adhesion High Fatigue Resistance Match Different Technical Process Application : Automotive V- Belts, Agricultural V-Belts Industrial V-Belts www.persentrade.com www.polyestercord.com Luna +86 137 5451 0798
Applications The machine is suitable for vulcanizing Ordinary rubber conveyor belt, Nylon conveyor belt, PVG conveyor belt, flame retardant conveyor belt, Steel cord conveyor belt etc. Salient Features High Quality Material Material of steel plate: High quality carbon steel Q355B, Guaranteed Performance Material, each steel plate has the same stable performance. After hot blasting, smooth, it is stronger than common steel. Excellent Sealing Performance The double-sealing ring and the dust-proof ring structure can guarantee a long lifetime. Stronger Plunger The material of plunger is Chilled Alloy Cast Iron, after polishing, grinding treatment and resist compression test, make the surface smooth, and anti-abrasion.
