Under Cran Kguillotine Shearing Machine
Overview Base Mounted Jib Cranes have a heavy wall structural steel pipe mast and a reinforced large diameter base plate for minimal deflection and continuous alignment. Durable and long lasting overhead floor cranes feature a rolled steel I-beam section with tapered flange for smooth trolley travel. Safety end stops at both ends of boom limit trolley travel. Light Duty Cranes are used for hand chain or light duty electric hoists Product Advantage -Special designed reducer for reliable performance -Box girder (for bigger capacity) gives safety factors -Easy installation and maintenance -Limit switch for rotation, trolley and hoisting -Special painting material for outside yard -Special rotation designing for winding area (need to be clarified)
Chain Electrical Hoist
Brief Introduction for battery power rail cart The battery power rail cart is a kind of plant transportation equipment that has developed relatively rapidly in recent years, with advantages such as environmental protection, safety and convenience. Due to the use of battery power supply, there is the limitation for the using time. Operation Method for battery power rail cart The battery power rail cart can be equipped with two kinds of operating handles and remote control; the length of the handle is generally 3m or 5m, there are four keys and a joystick, the four keys are: start, emergency stop, forward and backward, the joystick controls the steering of the battery power rail cart. The remote control is a six-button control, including start, stop, go forward, backward, left and right turn, when turning left or right, you must press the corresponding direction key at the same time. When you start again, press the start button directly. Whatâ??s more, the operating handle and the remote control cannot control the battery power rail cart at the same time (the control box has a switcher with operating handle and remote switch). there are a handle-placed box
QY25K5-I truck crane is a high-reliability product based on mature technology that our company has used to design and manufacture automobile cranes for many years. The special-purpose truck crane chassis made by our company is fully covered with the platform, and the classic K series appearance is simple and flexible. It is widely used in lifting and installation operations in urban construction, transportation, ports, bridges, oil fields, industrial and mining enterprises and other places. 1. Fully leading performance in lifting performance and driving performance. 2. Octagonal boom with superior hoisting capacity. 3. Inserting the arm head, lengthening the embedded slider, the lifting weight is small, and the telescopic expansion is stable. 4. Self-developed load-sensitive system, smooth control, high efficiency and energy saving. 5. The new hydraulic motor with high torque starting point ensures that the secondary lifting does not decline. 6. Proprietary single cylinder latch telescopic technology to improve the active safety of the telescopic system. 7. The torque limiter using digital bus technology has strong anti-interference ability and low failure rate. 8. The main structural parts adopt automatic welding technology, zero defects in welding and high reliability. 9. Dual-mode engine, the most likely to save you fuel.
This Folding kunckle boom and Telescopic boom crane is mainly used on the deck of bulk carrier or overload barge for handling a variety of cargo bulks. It has several hoisting points to fit the demand of vessel usage, which are 2.5T22M, 5T10M, makes the crane with long outreach to complete the lifting job. The folding type makes the crane itself saves space on the vessel
Weighing platforms used predominantly in heavy industry are light industry equipments which are produced for various types and sizes for the purpose of providing convenience and practical solutions in accordance with the needs of customers. Platform design; according to the customer's direction and location, according to the climate conditions, according to the material type, the load to be used, the business lines to be used, the corrosion and resistance to be exposed.
They are products that are used only for the purpose of cargo handling, manufactured in accordance with the standards and are indispensable in carrying the safe cargo. These hydraulically produced machines are used to dispatch many level differences in the fields, such as factory floors, garages, hospitals and so on, to ensure inter-fold material transport. This type of machine does not require deep wells and machine room, so it is more economical than standard elevators. Hydraulic load lifting machines are manufactured and assembled in a shorter time than other lifts. Also, as with other elevators, there is no need for frequent maintenance. * 100 kg to 10.000 kg capacity and 12 m height can be manufactured
Vehicle lifting platforms are designed to transport vehicles between different levels of building floors. Today, parking problems, which are the most important distresses of big cities, have begun to suffer as much as they can with car owners. Where concrete ramps are not available for access to the parking lot, vehicle platforms are the most convenient and practical solution for transporting vehicles between floors.
All kinds of recondition Ship crane pulley.
Deck crane Type: TGL 4026-2 Minimum Radius 3.7 m Maximum Radius 26 m Load Capacity 40 Tons
Crane a german brand new stock clothes. Can sort all seasons separate. 6.5 eur/kg.
125*100*580,suit for crane cylinder
Geared Monorail Travelling Trolley Travelling Troley Side View Front View Dimensions, Weight and Performance Data Push 500 Push/Geared Geared Geared Capacity kg 1000 3000 5000 10,000 Inside of wheel flanges mm Range 1 50-130 58-150 90-160 110-150 140-170 Range 2 140-200 150-210 160-220 160-210 180-210 Range 3 210-305 210-305 220-305 215-265 215-245 A Seat of susp, plate to runner tread Range 1 & 2 mm 75 89 110 84 137 Nominal 1.5 mm clearance to be allowed from edge of track flange to inside of wheel flange (3 mm overall on both side) Overall width of geared travel trolleys - J + (1/2 x track width) + G. On 500 to 2500 Kg. units when using the narrower track widths the cross bolt adjusting washers are to be assembled such that the end of the cross bolt is clear of the hand chain wheel. Weight of trolleys only exclude hand chain. Hand chain is 0.45Kg/m per linear length up to and including 2t capacity. Bottom of hand chain loop is 460 mm from ground level. Pusher bar fixing holes provided in all models. Anti-tip stop fitted to all hand geared versions. Buffers available as on option.
Specification Model HSH 3/4 HSH 1-1/2 HSH 3 HSH 6 Capacity ton 0.75 1.5 3 6 Lift m 1.5 1.5 1.5 1.5 Test load ton 1.125 2.25 4.5 7.5 Min. distance between hooks: mm 303 365 485 600 Pull on lever to lift full load kgf 20 21 33 35 No. of load chain falls mm 1 1 1 2 Diameter of load chain mm 6 7 10 10 Length of lever handle : D mm 290 410 410 410 Dimensions mm A 139 174 200 200 B 84 108 115 115 C 153 160 185 230 Net weight kg 7 11 20 30
Multipurpose, Portable, Universal, Gearless, Hand operated Pulling and Lifting machine, Supplied complete with telescopic, operating handle and standard Length of super flex steel fibre-mixed core wire-rope fitted with Hook or Shackle at one end and fused and tapered at the other end. Pulling & Lifting Machines Hy-Tack XL Series 2005 Technical Specifications HT-7 HT-13 HT-20 HT-35 HT-58 Dimensions (Approx.) 515 x 265 x 110 600 x 360 x 155 620 x 360 x 155 720 x 400 x 160 810 x 465 x 190 Capacity (SWL) (kgs) Lifting, Pulling 750, 1250 1600, 2600 2000, 3000 3200, 5200 5000, 8000 Length of Telescopic operating handle (Approx.) 54/72 cm 66/104 cm 70/130 cm 79/118 cm 120/145 cm Effort at full load (Approx.) kgs 40 50 50 60 70 Rope travel per Return stroke (Approx.) mm 40 55 50 36 30 Diameter of wire Rope (mm) 8.0 11.3 12.0 16.3 20.0 Standard Length with Each machine (meters) 10 20 20 10 10 breaking Load of wire rope (Approx.) 4.5 Tons 9.0 Tons 10.0 Tons 18.0 Tons 24.0 Tons Exclusive Features Casing: Made from CRC sheet (Galvanized) or Graded Aluminium for light weight a high factor of safety. Jaw: Made from Special Alloy Steel, Accurately Machined, so as to avoid slippage of wire rope. Jaw Limits: Are made from special steel & heat treated for greater strength. Hooks / D-shackles: Fitted with Alloy steel Forged Hooks or D-shackle to make it feasible to be able to fit it at any place. Wore Ropes: Super flex Steel Fiber -mixed are, manufactured as IS. 226. Accepted & Widely used by Railways Mines and Quarries Navigator Electricity Board’s Dockyards Road Transports Heavy Industries etc. Increase of Pulling and Lifting Power: Lifting - machine anchored above load
Manufactured in ISO 9001:2000 Certified Company Assured quality and Interchangeability of parts Truely Modular Construction Easily accessible separate brake, motor, drum, gear box & panel unit. Seamless Pipe Accurately Machined rope drum. Long Life. Unique and sturdy rope guide Arrangement Prevents rope slackening and easy change of rope. Precision Machine Cut case-Hardened Alloy steal gears. Noiseless Operation Long life Fail safe Disc Brake Trouble free operation and ease of adjustment Built in Control Panel with Std. Electricals Ready to use
Specification Method of use Rated volt(V) Input(w) Rated lifting weight(kg) Lifling speed (m/min) Lifting height (m) Quon/CTN (Pcs) Pocking dim-ension(cm) G,W,/N,W, (kg) HGS-B100-12 PA2OO Single-hook 220/230 450 100 10 12 2 46X36X16 24/22 Double-hook 200 5 6 HGS-B125-12 PA25O Single-hook 220/230 500 125 10 12 2 46X36X16 25/23 Double-hook 250 5 6 HGS-B150-12 PA3OO Single-hook 220/230 550 150 10 12 2 46X.36X16 26/24 Double-hook 300 5 6 HGS-8200-12PA4OO Single-hook 220/230 750 200 10 12 2 52X41X17 35/32 Double-hook 400 5 6 Single-hook 220/230 900 250 10 12 2 52X41X17 36/33 Double-hook 500 5 6 Single-hook 220/230 1050 300 10 12 2 52X41X17 37/34
Used tower crane 2013 model 63m height (huh) 60 m JIB
QDY bridge foundry crane with hook is mainly used at the place where the molten metal is liftedThe working class of the complete machine is A7,and thermalprotective coating is added at the bottom of the main girderThe assembling and test of the crane conform to the document No.ZJBT[2007]375 which was issued by General Administration of Quality Supervision,Inspection and Quarantine of the PeopleS Republic of ChinaThe place where molten nonmetal material and red-hot solid metal is lifted also can refer to this document
