Wire rope electric hoist application 1. Cd and md wire rope electric hoist is small type lifting equipment, which can be installed on single beam overhead crane, single beam gantry crane, jib crane or i-beam. 2. Cd wire rope electric hoist lifting speed is 7 m/min, md wire rope electric hoist has two lifting speed: 0.7 m/min and 7 m/min. 3. Working conditions: * ambient temperature should be no more than 40 oc. * controlled by push button or remote with vvvf. * forbidden to use in easily combustible, explosive, corrosive, electromagnetic, electric hoist, melting metal, overloading and dust works. 4. Wire rope electric hoist specification: Loading capacity: 0.25 ~ 80t Lifting height: 3 ~ 50m Lifting speed: 0.3 ~ 8m/min Power supply: 220 ~ 440v, 50/60hz, 3phase Wire rope electric hoist features 1.Compacted structure, save the space 2.Aluminum alloy body, low self weight 3.Free-maintenance design, interchangeable of components; 4.The gear transmission was harden treatment, low noise, environmentally friendly 5.The waste spare parts wonâ??t make a destory to surrounding environment 6.Convenienct installation flexible operation.
Mobile lifting jib crane has designed to be highly mobile, for flexible workstations. The foundation should be flat, so the entire crane can travel quickly and easily with a forklift or an overhead crane. The mobile jib crane is a high-quality lifting device for the loading capacity range from 125 to 1000 kg. This mobile jib crane is often used for machine repair and modifications or for temporary installation of new workstations. Specification Model number: bzy Arm length : customized Capacity: 125-1000kgs Lifting height: customized Certification: iso 9001 gb/t8906-2014 Working system: a3 Lifting speed: 0.8/8m/min Slewing angle: 180/270/360 degree Power source: three-phase ac 380v 50hz or other Warranty :12 month Mobile jib crane application 1. The most common applications for jibs are individual workstations; machine tools, welding/fabrication stations, and some small assembly stations. 2. They are also often used in simple loading / unloading operations where it is not necessary to spot a load precisely. 3. Jib cranes most often handle lighter loads at lower duty cycles than their bridge and gantry crane counterparts. 4. If there is a need for precise locating of heavy loads, a large area of hook coverage, or frequent use for heavy loads, the jib crane may not be the best solution.
The column mounted jib crane is composed by the vertical shaft, revolving arm, rotating shaft, hoist etc. The bottom of the vertical shaft is fixed on the concrete base. Horizontally rotation of the revolving arm: manual, depend on the operator use the human force to push the impending working or self prepared rope etc device. The hoist travel right and left straight on the h beam with the hoist to lift the heavy materials. The jib crane is suitable to work in the dock, warehouse, workshop etc fixed working conditions, it can work within the 360 degrees to lift, move and materials handling. Feature Simple structure, light dead weight. Install the rain cover to protect the electric hoist. 360 angle for rotating, or as your requirement. Including the safety system, like emergency stop device, etc. Two control types: ground handle and wireless remote. Safety system 1. Weight overload protection device 2. Top quality long time bearing polyurethane materials buffer 3. Crane traveling limit switch 4. Voltage lower protection function 5. Emergency stop system 6. Current overload protection system and so on Technical parameter Modelbzd1bzd2bzd3bzd5bzd6bzd8bzd10 Lift capacity (t)12356810 Horizontal throw (m)5.5-10.55.5-10.55.5-10.55.3-10.35.3-10.35.2-10.25.2-10.2 Radius of gyration (m)7-127-127-127-125-105-105-10 Angle of revolution180/270/360 Lift height (m)3-5 Lift speed (m/min)8/2, 4/1 Travel speed (m/min)20 Power supplythree-phase a.C. 380v, 50hz (as your demand)
Product description The fixed hydraulic scissor lift is a heavy carry lifting equipment, is generally used for lifting cargo, people, working place and loading, unloading goods from ground to other floors, is an ideal equipment for goods production lines, lifting cargo from floors. Includes electric type and or manual type. According to the lift height and load capacity, it is classified to single scissor type, double scissor type and multi scissor type, lift height is from 1-20m, 100kg-20ton. The control mode and power supply voltage are customized according to different requirements. The fixed lift tables are suitable for factories, workshop indoor and outdoor, airports, offices, shops, station, architectural decoration industry, wharf, bridge, hall, machinery installation, equipment maintenance, building maintenance, institutions, garages, warehouse and other industries. Feature 1. Easy to operate, can be used both indoor and outdoor 2. High-duty steel, high stability mechanical structure, wide operating platform and high bearing capacity 3. Can for many people work at the same time 4. Makes the work more efficient, safe and more security 5. Operation is easy 6. With two sets of control system, one control the box below, another hand controller on safety rail that can be operated on work platform 7. Convenient, energy-efficient and environmental friendly ModelLifting height (mmmin. Height (mmcapacity (kgtable size (mmpower (kwrising time (s) Sjg0.5-4.545007505002000*10002.277 Sjg1.0-4.5450085010002000*15003.080 Sjg2.0-4.5450090020002200*15002.290 Sjg1.0-7.5750099010002200*18003.0100 Sjg2.0-7.57500106520002400*24004.0105 Sjg2.0-1.8180070020002500*20003.050 Sjg5.0-1.8180096050003500*25004.088
During the overhead crane running, due to the inertia, the lifting hook ( or other spreaders) will swing with overhead crane move, this swing is not conducive to crane hoisting operations. Anti-swing device can help the overhead & gantry crane to avoid the impact, bow we suggest the electronic anti - swing to instead of mechanical anti-swing device. Overhead crane electronic anti-swing control system consist of sensor, programmable controller, drive and bridge crane system, uses digital ac variable frequency speed control device. Working principle Its working principle is: the sensors and detection element collect the running information, such as spreader swing angle, the angular velocity and so on, microcomputer internal programmable controller will process these detected information, then will provide the best control parameter to the vehicle velocity modulation system ( drive device) to control the electric hoist trolley running direction and speed, limit the spreader and load swing angle to the minimum, then achieve anti-swing and eliminate swing purpose. Together with electric trolley running, electronic anti-swing achieve the effect of reducing swing by controlling the corresponding input force, can achieve automatic control, compared with the mechanical anti-swing device, no need drivers operating experience, almost can unmanned operate.
Semi-electric Stacker Hydraulic Hand Pallet Truck Technical Features Lever-assisted steering, reduce labor intensity, the service time is also increased by 3 times to chain steering. Low center of gravity, making the stacker more stable during use and reliable. Over-discharge protection device greatly extended battery life. The use of imported mast materials, ensures high strength, good stability. Adjustable forged forks can be lowered to the same height of legs. Foot brake is simple and easy to maintain. Setting a explosion-proof valve in the pump
Poweful Permanent Magnetic Lifter  Double magnetic circuit lifters. Strong magnetic path by NdFeb magnetic materials. Higher magnetism, less weight. Less remaining magnetism when being off. New designed handle enable its damper strength lower. Suitable for thin magnetic-inductive material with thickness over 5mm. JTML-A Model safety factor 3.5:1. Strong permanent magnetic circuit. Stable and lasting working performance. Strong pull-off strength. High safety factor and reliable quality.
Jinrui is one of the professional manufacturer rail transfer cart manufacturers and suppliers. Don't hesitate to import customized and cheap workshop and warehouse transfer cart, railway flat cart, industrial transfer cart from our factory or check the price and design with us. The kpx battery powered transfer flat cart is powered by batteries, can be used indoor and outdoor, such as metallurgy, foundry, new factory construction and construction building and so on. The kpx electric transfer cart is welded of strong steel, safe and reliable, wear-resistant. It has four steel wheels without requirement of railway construction, security, flexible and conveniet. It can travel in curves, no railway distance restrictions, so it can save the railway installation cost. The battery powered transfer carts also has a dc motor, reducer, start and stop smoonthly, easy to remote control, strong overload capacity. The reducer is small impact, low voltage and long service life.
Column Mounted Jib Crane The Column Mounted Jib Crane is a kind of small and medium-size lifting crane, it is mounted on the wall with bolts and fixed steel plate, can operate freely in the three-dimensional space, especially suitable for using in the short-distance, intensive lifting work site. For the Column Mounted Jib Crane only has Cantilever Arm and electric or manual hoist, save workshop space, save energy, 180 degree rotating, easy operation, no need of traveling railway, low cost, turning agile, wide working conditions, can be widely used in production line of workshop, assembling line, warehouse and other.
Fixed scissor lift table Lift table quick details Place of origin: henan, china (mainland) brand name: jinrui Lift mechanism: scissor lift lift drive / actuation: hydraulic Power: 2.2kw/3kw rated loading capacity: customized Lifting height: customized table size: customized Overall dimensions: 1820*1400*1180mm or more weight: 660kg-2800kg Emergency stop system: include working duty: a3 Industry voltage: as your requirement painting color: as your requirement Certification: iso 9001 weight overload protection device: include application : it is used to lift up and down large cargo to different levels, normally in the assembly line and other cargo transferring. Scissor lift table packing & delivery detail Moq: 1 set Package: wooden case Port of dispatch: qingdao/tianjin/shanghai/other Delivery time: within 10 working days after the receipt of deposit After-sales service provided: engineers available to service machinery overseas payment: tt/lc/discussible Installation: the installation team can be sent to local site to install for customer. Warranty: 12 month
Column mounted jib crane The column mounted jib crane is a kind of small and medium-size lifting crane, it is mounted on the wall with bolts and fixed steel plate, can operate freely in the three-dimensional space, especially suitable for using in the short-distance, intensive lifting work site. For the column mounted jib crane only has cantilever arm and electric or manual hoist, save workshop space, save energy, 180 degree rotating, easy operation, no need of traveling railway, low cost, turning agile, wide working conditions, can be widely used in production line of workshop, assembling line, warehouse and other.
Product Description Single girder overhead crane also called single beam bridge crane, it is characterized by more reasonable structure and higher strength steel as a whole. Used together with CD1, MD1 model electric hoist as a complete set. The operation mode has the ground cable handle, ground wireless remote control, operation and the two mode of operation and driving. Single girder overhead crane usually lifting capacity: 0.5ton ~ 32ton, lifting height:3m~60m, span: 7.5m~31.5m, working temperature: -20°C~60°C, working grade: A3~A6. LDA Single Girder Overhead Crane is widely used for material lifting in many industries, manufacturing workshop, mold inject workshop, machining workshop and so on. But the crane is forbidden to work in the Inflammable, explosive and corrosion environment. Feature 1.Customized design overhead crane; 2.Support OEM / ODM for our clients; 3.Steel material adopt high quality carbon steel Q235 or Q345B; 4.Easy to install,operate,maintain; 5.Crane drive: IP54 or IP44,level F insulation; 6.With senior technical engineer team and perfect sales service
LX Single Girder Suspension Hanging Overhead Crane Production Description Single beam hanging overhead crane is a light duty track traveling crane with trajectory, composed of girder weld by steel plate and I-steel, end girder, electric hoist and electric treadmill. It can be hung on the I-beam orbit on the top of the workshop, with the cantilever of 0.5~1m long. The electric hoist runs along the lower flanges of the I-steel of girder to accomplish article hoisting, featuring dexterous structure and easy installation and maintenance. This product adopts ground controlling and works at a temperature of -25~+40 degree. It is prohibited to use in the environment in combustible,explosive or corrosive environment. Application Areas It is very convenient for application in loading, unloading, and moving iron or steel blocks, cylinders and so on. Permanent Magnetic crane are the most ideal lifting facility for factories, docks, warehouses and transportation, it also role in metallurgy, mining, machinery industry, transportation etc.
Description Double girder overhead crane is composed of box type bridge frame, lifting trolley, crane traveling mechanism, and electrical system. It is rely on the bridge frame along the workshop orbital direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. It could be classified into several working duties, e.g. A5, A6, A7 according to the working frequency and pure working time. Double girder overhead crane allocation hook used in machining, assembly workshop, metal workshop, metallurgy and casting workshop and warehouse handling work; allocation of grab is suitable for metallurgy, cement, chemical or open fixed span in bulk material handling. Features Reasonable structure and favorable performance. Smooth starting and stopping. Safe and reliable traveling, long life. Low noise, commodious cabin with good view. High quality automatic welding and NDT inspection. Crane drive: IP54 or IP44, level F insulation. Designed according to your required.
QC Electromagnetic Overhead Crane Application In loading and unloading, the crane can lift iron or steel blocks, cylinders and so on. It is very convenient for application in loading, unloading, and moving. Permanent Magnetic crane are the most ideal lifting facility for factories, docks, warehouses and transportation. Description QC type electromagnetic overhead crane is a kind of heavy duty magnet crane, which is consisting of beams, cabin, flexible electromagnetic chuck, crane traveling mechanism, trolley lifting and cross traveling mechanism, electrical control system. The beams are welded by the machine hands, which make the structure more reasonable and reliable; The cabin used for operating the crane, which has seats inside; The electromagnetic chuck can adsorbs iron goods; The trolley can move horizontally on the rail fitted on beams; Floor adopts insulation pads and toughened glass for windows; extinguisher and fan are equipped. Both traveling mechanism and trolley motors are special motors for canes, large starting torque and loading capacity. Other accessory like air-condition, buzzer, inter phone can be configured according to our clients request! The shape of the magnetic can be designed according to adsorptive goods.
QZ Double Girder Grab Gantry Crane Description Double girder grab bucket overhead crane consists of box-shaped beam, grab, trolley lifting and traveling mechanism, crane traveling mechanism, cabin and electric control system. The grab can grab debris, mine stone, or other things, it is widely used for loading goods in power plant, freight yard, workshop and wastes treatment factory to transport bulk materials. All the mechanism is operated in cabin. There is three direction to enter cabin platform. The trolley can move horizontally on the rail fitted on beams. The beams are welded by the machine hands, which make the structure more reasonable and reliable. Double girder grab overhead crane mainly could be classified into several working duties, A3-A7. The grab separately hung over the switching mechanism and lifting mechanism with four steel wire ropes. can open and close in any height, but it only adapts to particle materiel accumulation in natural state. The grab If you want to grab the material under water or special material, you should mention it when order good. Feature 1.Reasonable structure, strong bearing capacity 2.Main lifting mechanism is equipped with speed switch 3.Safe and reliable operation 4.Commodious cabin and open view 5.Low cost maintenance, long working life 6.Strong box type, welding by machine hand Safety device As safety is the most important for such heavy machine, we are equipped with the following devices: 1.Crane traveling limit and lifting height limit switch 2.Weight overload protection device 3.Top quality long time bearing 4.Polyurethane materials buffer 5.Voltage lower protection function 6.Phase sequence protection function 7.Current overload protection system 8.Emergency stop function 9.Rain cover for outside hoist, driving units, electrical cubicle. 10.Warning indicator: flashing lights and warning sound.
Fixed Scissor Lift Table Lift Table Quick Details Place of Origin: Henan, China (Mainland) Brand Name: Jinrui Lift Mechanism: Scissor Lift Lift Drive / Actuation: Hydraulic Power: 2.2kw/3kw Rated Loading Capacity: Customized Lifting Height: Customized Table Size: Customized Overall Dimensions: 1820*1400*1180mm or more Weight: 660KG-2800KG Emergency stop system: Include Working duty: A3 Industry voltage: As your requirement Painting color: As your requirement Certification: ISO 9001 Weight overload protection device: Include Application : It is used to lift up and down large cargo to different levels, normally in the assembly line and other cargo transferring. Scissor Lift Table Packing & Delivery Detail MOQ: 1 SET Package: Wooden Case Port of dispatch: Qingdao/Tianjin/Shanghai/Other Delivery time: Within 10 working days after the receipt of deposit After-sales Service Provided: Engineers available to service machinery overseas Payment: TT/LC/Discussible Installation: The installation team can be sent to local site to install for customer. Warranty: 12 month.
ISO, CE, SGS Certificates Double Girder Gantry Crane Double girder gantry crane Application Double girder gantry crane is widely used for loading, unloading, transportation in outdoor workshop, ourdoor warehouse, stock yard, railway and freight station, construction and bridhe building, harbor and more Parameters Macx. Lifting capacity: 500 ton Span: 10- 35 m Max Lifting height: 12 m Control mode: Remoted controll, Ground control or cabin control Working duty: A5-A8 Power source: Cable or slide wire. Gantry crane Description The double girder gantry crane consist of Main beam, Support legs, Electric hoist with trolley, Motor, Reducer, Cabin, and other Electric parts. The Frame crane main beam and support legs are high quality welded steel box-shape, high intensity, rigidity, stanle, and long service life. The Cantilever arms can added the working range. The gantry crane lifting mechanism is composed by high quality electric hoist, motor, reducer, coiling block, lifting and traveling limit switch, traveling smoonthly, can emergency stop. Equip with overload protection, avoid overload damaging the hoist and gantry crane. Motor, reducer and Electric parts adopt international brand, such as Schneider, Siemens, Chint and other to ensure accurate operation, excellent performance and convenient maintenance Equip with frequency converter can be supplied to meet your demand. And, besides common hook, you also can choose other lifting tools, such as grab, electromagnetic chuck, billet clamp and container holder
Single girder gantry crane Specifications Lifting capacity: 5 - 20 ton Lifting height: 6 - 12m Span: 7.5 -35 m Lifting speed: Single speed or double speed Working temperature: -25 to +40 degree Control method: Pendent control, remote control, ground control Applications: workshop, warehouse, metallurgy, hydraulic engineering, open-pit mines, stockyards, port terminals, nonferrous metal mining and more Single girder gantry crane introduction 5 - 20 ton Single girder gantry crane is a light duty crane machine. In general, gantry crane is widely used at outdoor and warehouses to load, unload or grab materials, the gantry crane is equiped with CM1, MD1 model electric hoists, electric hoists travel along with the rails under the I-steel, with accurate movement of up and down, left and right, forward and backward. The single girder gantry crane is prohibited to be used for lifting blazing, melting metal or toxicant, also can not be used in explosion-proof or insulating working conditions.
Single Girder Gantry Crane is used together with CD/MD model electric hoist, traveling on the railway for general handling and lifting operations. It is consists of 4 parts, they are main beam, electric hoist, two ground beams and four legs. This machine is a regular crane widely used at open ground and warehouse to load, unload or grab materials for highway, bridges, power station and other construction workshops projects. Parameters feature: Lifting capacity: 3~32t Span: 7.5-31.5m Max. lifting height: 30m Lifting speed: 8 or 0.8m/min Traveling speed: 20 or 30m/min Work duty: A3-A5 Work temperature: -20°C-+40°C Control method: Pendant line with pressing button, remote control or cabin control
