Chain hoist of Konecranes is suitable for kinds of industries, such as generally manufacturing, and the maximum lifting loads of 5 tons makes it for maintenance work. And the chain hoist could supply reliable and ergonomic service for customers. Due to the different requirements of different of clients, Konecranes could customize for individual needs. Firm structure, diverse functions, and convenient maintenance make Kone chain hoist superior and competitive.
The load capacity of wire rope hoist is up to 80 tons. And it is the indispensible device for assembly shop and plant, which goes with more space and higher lifting height. Besides the saving space and the longer life span, the wire rope hoist has the higher lifting speed in order to increase work efficiency. Within the global authentication and support, all the materials and equipment are under strict control to guarantee the high quality of products. The annual sale more than 10,000 is the best proof
Advantages: configuration in small size and light weight, design in selectable lifts, low maintenance cost, high cost-efficiency, in the use of the most advanced lifting chain over the world with the super high strength and life span.
Characteristics;
Large airflow rate, slow revolution speed
To supply large wind volume with very low revolution rate
Distinctions for other fans;
Diameter 2.4m-7.3m
Design and engineering; the special fan blades
Strengths;
To be silent, be efficient, without high speed airflow and noise
Almost maintenance-free(available for examination/hour)
low cost;
To decrease the influence of the air when frequently door opened and closed
To supply a stable and average temperature between ceiling and floor, wall to wall
To the most extent, cutting the costed pipe engineering for warming and air condition
Uniqueness of blades
With the Whale Patent technology, in the same diameter, lager airflowrate is captured
7128 Cranes Lifts Suppliers
Short on time? Let Cranes Lifts sellers contact you.
Portable scissor car lift sdn-sp-2.7
Product description:
Lifting capacity 2800kg
Lifting height 1200mm
Min. Height 150mm
Lifting time 30- 50s
Motor power 2.2kw
Power supply 220v/380v
Net weight 360kg
1. Hoisting capacity for 1~32 tonnes
2. Span for 7.5~31.5 meters
3. Working environment for -25? ~ 40?
4. Class of utilization A3~A5
5. The trolley running on the girder laying orbit.
6. 12 months Warranty
High quality Electric Double Girder Overhead Bridge Crane 30 ton, 35 ton, 50 ton
This bridge crane is applied to transfer, assembly, check and repair as well as load and unload at mechanicprocessing workshop,
subsidiary workshop of metallurgical mill, warehouse, goods yard and power station.
they can also be used instead of common doublegirder overhead crane at production workshop in light textiles or food industry.
High quality single girder hanger bridge crane 10 ton for sale
1. Load capacity: 5 t to 600 t
2. Span: 10.5 m - 33 m
3. Lifting Height: 6 m - 20m
4. Structurte: Box structure type
5. Character: Double griders
6. Power Supply: 3-Phase
7. Standard: GB/T 24001-2004
8. Certification: CE, ISO 9001
9. Image Design: Classic design (Ruby red,
ruby blue, white)
1.All hoist and crane movements are independent and can be run simultaneously.
It can improve on lifting efficiency and using life wastage of the trolley mechanism.
2.High quality welding technology of the crane and NDT inspection.
3.It has many safety protections, such as warning indicator,
wireless infra-detector, various safety limits and so on.
4.First class quality with competitive price
5.Reasonable structure, favorable performance; Strong durability
6.Smooth starting and stopping; Superior safety and reliability
7.We can customize all hoists and cranes with different operating conditions;
1. LD model single beam motor crane is improved and designed basing on LD type crane which has more reasonable structure and lighter in weight.
2. This overhead crane is characterized by more reasonable structure and higher strength steel as a whole, the main beam and end carriage are made by U-section steel frame.
3. This overhead crane is used together with CD1/MD1 model or HC/HM model wire rope electric hoist as a complete set.
4. This overhead crane is light duty class overhead crane, the capacity 5 tons. The span from 7.5m to 22.5m, the working grade is A3. Working temperature within -25 to +40 centigrade.
5. This overhead crane is widely used in plants, warehouses, material stocks to lift goods. It is prohibited to use the equipmenmt in the combustible, explosive to corrosives environment.
This product is widely used in plants ,warehouses,material stocks to lift goods ,It is prohibited to use the equipment in the combustible ,explosiveor corrosives environment.
Atahis product hac two operational methods,ground or operational room which has open model and closed model and can be installed on the left or right side according to the practical situation .And the direction of entering the gate has two forms, sideway and ends in order to satisfy the users choice under different conditions.
LDA type crane is designed basing on LD type.LDA type crane has reasonable structure and strong nigdity.CD1 and
MD1 hoist are used together with this type of crane which is on ligth duty.The electric hoist runs along the lower flange
of the l-steel of the girder to accomplish article hoisting.It features light structure and easy installation and maintenance.
Lift capacity: 0.5- 50t
Span: 6-30m
Lift height: 3-30m
LDA Single Girder EOT Crane match with the CD1/MD1 type Electric wire rope hoist.
Which is the most popular use crane machinery on the market at present.
High Quality Single Grider Bridge Crane Overhead Crane With Best Price
LDA type crane is the most popular crane for workshop. It is designed and manufacturing on the basis of LD type crane which has more reasonable structure and lighter in weight. This crane belongs to light duty crane, can be used with CD1 and MD1 hoist. Lift capacity is from 1 ton to 16 tons, suitable for 7.5m to 28.5m. It works indoor under the temperature -25°C to +40°C, humidity not more than 85% (ambient temp is 25°C). Its working condition is A3-A5.This type crane is commonly used in mechanical production workshops, assembling production line, warehouse and cargo yard, forbid to be used in humidity over 85%,corrosive and explosive places. It cannot be used to handle melting metals and toxic, flammable dangerous materials.
Controlling can be ground operation or cabinet operation, the cabinet divided into close one and open one, it can be installed at the left or right side up to different conditions.
low relaxation high tensile strength pc strand is mainly used for concrete structure,such as railway and highway, overhead crane construction ,multi-floor industrial building floor and roof reinforcement for sports stadiums and etc,products are widely applied to the major domestic rail,road,and construction,The size including:9.53mm/12.7mm/15.24mm/9.3mm/12.5mm/15.7mm/17.8mm etc with tesile strength 1860Mpa
low relaxation high tensile strength pc strand is mainly used for concrete structure,such as railway and highway, overhead crane construction ,multi-floor industrial building floor and roof reinforcement for sports stadiums and etc,products are widely applied to the major domestic rail,road,and construction,The size including:9.53mm/12.7mm/15.24mm/9.3mm/12.5mm/15.7mm/17.8mm etc with tesile strength 1860Mpa
7128 Cranes Lifts Suppliers
Short on time? Let Cranes Lifts sellers contact you.
