Maker: Mitsubishi Forklift Model: FD280 (Year 2016, Hour: 6.9 h) x1 unit Located in Japan Length: 9670 mm Width: 3680 mm Height with Mast lower positionï¼?5020mm Height with Mast upper positionï¼?6770mm Wheelbase: 4800mm Front tread: 2635mm Rear tread: 2750mm Lowest from the floor level (below the mast): 380mm Fuel tank: 480 litter Weight: 43670kg Engine: Mitsubishi 6D24-TCE1 Diesel engine Rated output/rotation speed: 224/2200Kw/rpm Max torque/rotation speed: 1135/1400 Nã?»m/rpm Displacement: 11.94 litter Tire: Front: 16.00-25-28PR (I) Double tire Rear: 16.00-25-28PR (I) Running capacity: up to 33.5 km/h Minimum turning radius: 6800mm Mast: Roller driven 2 step Panorama mast Tile: 6 degree and then 12 degree Fork Length: 2440mm Fork Width x Thickness: 320 x 110mm Attachment: Hydraulic Fork positioner with side shift Side shift (For right and left): 300mm Fork position range (Outer- Outer): 790-2840 mm Lifting Capacity: Load: 25000kg Load centering: 1250mm Max lifting: 3500mm Lifting speed: Empty 430mm/sec, with load 390mm/sec
China HSHCL 100t mobile straddle carrier machine are basically lifting cranes mounted on tyres often used to replace gantry cranes for lifting and handling heavy loads in casting yards, factories, storage areas, ports and marinas. Compared to normal gantry cranes which move on fixed rails, the Straddle Carrier has the flexibility to lift and steer heavy loads in any direction on motorized wheels. These Straddle Carriers' lifting capacities normally range from 20t to 900t. Each machine is custom-designed and fabricated under tight supervision to meet the client's requirements. China HSHCL 100t mobile straddle carrier machine are equipped with reliable systems of hydraulic equipment, winches, ropes, and electric and hydraulic motors. These highly mechanized machines equip with emergency features and safety switches to ensure safe use. Our Straddle Carrier's Advantage 1. Latest drive technologies, variable motor speeds and integrated power management reduce operating costs and increase eco-efficiency. 2. Excellent handling, acceleration speed. 3. Innovative driver assistance features: safer operation, fatigue reduction. 4. Reduced maintenance thanks to direct drive units, high-quality components. Safety Features: China HSHCL 100t mobile straddle carrier machine is designed for safety. Winches are equipped with double breaking system. Upon request we provide Triple breaking system. Emergency stop button, Limit switch, sensor are located at designated location. 1. Have the function to monitor and record operation status of straddle carrier, the data could be recorded in local monitor and stored in the remote server to meet the demand on accidents analysis of straddle carrier; 2. Have the function to monitor wind velocity in the real time, which reminds driver to operate the straddle carrier safely; 3. Have the function of long distance monitoring on safety state of straddle carrier at real time, which could meet the demand on remote management.
China hshcl column mounted mounted jib crane 5 ton for sale is a small and medium-speed lifting equipment developed recently. It has characteristics of unique structure, safe and reliable operation , high, efficiency. Energy-saving, and flexibility. China hshcl column mounted mounted jib crane 5 ton for sale be operated under three dimensional environment. It is superior in the cases of short distance, concentrated lifting. China hshcl column mounted mounted jib crane 5 ton for sale is widely used at workshop, warehouse and various fixed place. Our services 1. One year warranty for whole machines. 2. Low charge for continue maintenance when warranty is expired. 3. Exclusive support engineer. 4. Low price provide for spare parts. Company information Shenghua heavy crane group is a big enterprise specializing in researching, developing, producing and selling. It mainly produce electric hoist, single/double overhead crane, gantry crane, china hshcl column mounted mounted jib crane 5 ton for sale, bridging crane, lifting beam crane, carrying formwork crane(bridging crane), bridging gantry crane, steel beam platform bridge, steel frame bridge and all kinds of accessories. It covers 200 thousands square meter, we have more than 600 staff which contains more than 30 middle and advanced science and technology research and development personnel. We have advanced production processing equipment and inspection equipment more than 400 sets.
Product Description Double beam box type two trolley gantry crane Double beam box type two trolley gantry crane is applied outside warehouse or railway sideways to do common lifting and unloading works, Double beam box type two trolley gantry crane is composed of bridge, support legs, crane traveling organ, trolley, electric equipment, strong lifting winch, the frame adopts box-type welding mechanism, crane traveling mechanisms are operated in the driver cabin or remote control, Power is supplied by cable or slide wire, there are different capacity double beams gantry crane for your choice according to your different use. Electrical and Control Equipment Double beam box type two trolley gantry crane that we are offering is designed to meet the required functions and requirement stated in your specifications, as well as for the operating conditions. Packing & Delivery Packing: 1. Electric parts are packed by high quality plywood crate, to reduce distortion in conveying; 2. Main beams, end beams and electric hoist are packed by plastic woven cloth. It can reduce abrasion when transport. Delivery: 1. If the size of whole Double beam box type two trolley gantry crane are suitable for container ship, usually by container; 2. If the size is too big, usually by bulk ship or by container after truncation; 3. Transport ways are based on reducing cost for you and keep the crane performance! FAQ 1. What's the information should I provide when inquiry? a: Lift capacity. b: Lift height. c: Span. d: Power source. e:Working environment. More details, better. If you have the drawing will be very better. 2. Operating methods for selection? A: Pendent controller with push buttons. B: Remote control with push buttons. C: Cabin control with joystick. 3. Can you provide the various lifting tools? Sure, we can provide any tools other specials you need, please tell us it when enquiry. 4. How to install the Double beam box type two trolley gantry crane? Our senior engineer can be your side to do the installation guide service and training. Moreover, our best sales can visit your country. 5. Safety device Overload limiter, Limit Switch (lifting and traveling), Interlock protection device, Buffer, Overhaul cage, Rail clear plate, Protective cover, Bus bar preventer plate, Anticollision device, Main isolating switch, Emergency stop system, Motor overload protection, and so on.
Highway bridge hanging basket form traveller Form Traveler is used Balance Cantilever Construction Method. Highway bridge hanging basket form traveller is easier to be use compare to Under Slung Model. And it is easier to be modified for future usage. Our Highway bridge hanging basket form traveller are with good quality modular connection, designed for future modification and repeated usage for many years. We supply good quality metal formwork. We also provide plywood formwork system as it is a more economical solution. Concreting Support, self-launching operation, level adjustments are all by means of hydraulic system. Erection of the Highway bridge hanging basket form traveller on the pier top can be as short as 1 week. All major parts join together by pin connection, which promises speedy erection and high accuracy design. Our Company Henan Shenghua Heavy Crane Group is a big enterprise specialized in researching, developing, producing and exporting. It mainly produces overhead crane and gantry crane, beam launcher, movable scaffolding system crane, Highway bridge hanging basket form traveller, straddle carrier, tyre transportor, beam trolley, portal crane and electric winch, electric hoist and all kinds of accessories, which widly cover machinery, metallurgy, electric power, railway, water conservancy, ports, terminals and other industries. Shenghua Heavy Crane Group have more than 600 staff, and covers 200,000 square meters. Our advantages: A. More than 50 R&D personnel with advanced Science and technology. B. More than 400 sets advanced Production processing equipment and inspection equipment. C. Independent intellectual property rights to develop energy saving bridge cranes, gantry cranes, and electric hoist. D. Obtain ISO 9001 certificate and more than 10 series of patent certificates. E. Efficient service and competitive products. F. Export more than 100 countries. Packing & Delivery Packing 1. Hydraulic parts are packed by high quality plywood crate to reduce distortion. 2. Structure are packed by plastic woven cloth to reduce abrasion during transporting. Delivery 1. If the size of Highway bridge hanging basket form traveller are suitable for container ship, usually by container. 2. If the size is too big, usually by bulk ship or by container after disassembly. 3. Transport ways are based on reducing cost and keep the Highway bridge hanging basket form traveller performance. Delivery time Could be delivered within 30 to 40 days after the receipt of deposit. Transportation Generally 35 days to 50 days to destination port.
Scissor lifts are typical aerial work platforms used indoors or outdoors when mostly vertical movement is needed.
China HSHCL Truss type overhead double bridge girder launching gantry machine The China HSHCL Truss type overhead double bridge girder launching gantry machine is used to construct prefabricated spans up to 60m long. It is designed and fabricated in order to ensure high performances, efficiency, safety, flexibility and multiple successive utilization. 1. Independent supports relocation system. 2. Independent stressing platform handling system. 3. Service overhead crane. 4. Radio remote controls for all operations. 5. Radio remote controlled spreader beam for segment positioning. Safety is the most important issue for cranes. To ensure the safety, the following safety devices are equipment in China HSHCL Truss type overhead double bridge girder launching gantry machine. 1. Crane traveling limit switch. 2. Overload protection device. 3. Lifting height limit device. 4. Voltage lower protection function . 5. Phase sequence protection function. 6. Emergency stop function. 7. Rain cover for outside hoist, driving units, electric cubicle. 8. Warnings indicator: flashing nights and warning sounds. 9. Wire-less infra-detector for anti-collusion.
We sell a used crane Potain IGO 13, year 2006 complete with axle, radiocontrol, documents, CE. The crane is in very good condition and it is located in the north of Italy. The price is to be agreed. If you need any further information, do not hesitate to contact me at this email address: info@euromontaggigru.com
Potain mc85b, year 2005/2006, h 30 mt. , double trolley, complete with chassis 3, 80x3, 80 radiocontrol, documents, ce. Price to be agreed. Available for further information. -
Potain hd40, year 2005, complete with axle, radiocontrol, documents, ce. Price to be agreed. Available for further information. -
We sell a used erecting crane Comedil mod. CBR36H-4, year 2003, with axles, radio control, CE. The crane is in very good condition and it is located in the north of Italy. The price is to be agreed. If you need any further information, do not hesitate to contact me at this email address: info@euromontaggigru.com
The China HSHCL 1500 ton concrete bridge launcher crane hydraulic is used to construct prefabricated spans up to 60m long. It is designed and fabricated in order to ensure high performances, efficiency, safety, flexibility and multiple successive utilization. Independent supports relocation system. Independent stressing platform handling system. Service overhead crane. Radio remote controls for all operations. Radio remote controlled spreader beam for segment positioning. Safety Features Safety is the most important issue for China HSHCL 1500 ton concrete bridge launcher crane hydraulic. To ensure the safety, the following safety devices are equipped in 1500 ton concrete bridge launcher crane hydraulic. Crane traveling limit switch. Overload protection device. Lifting height limit device. Voltage lower protection function . Phase sequence protection function. Emergency stop function. Rain cover for outside hoist, driving units, electric cubicle. Warning indicator : flashing nights and warning sounds. Wire-less infra-detector for anti-collusion. FAQ 1. Whatâ??s the information should I provide when inquiry about the China HSHCL 1500 ton concrete bridge launcher crane hydraulic? we need the Bridge Drawing, the Maximum longitudinal slope and the Maximum Transverse slope. The Girder/beam drawing. 2. How many kinds of construction methods for bridge launcher? 1. overhead segmental. 2. underslung segmental. 3. balanced cantilever erection segmental launching gantry. 4. full span. 3. What are inspection standard for load test of bridge launcher? a. Dynamic load test 1.1 times rated load, main girder does not down deflection, all mechanisms work well, performance parameters meet the design demand, all limit switches and safety protection interlock devices are reliable, all spare parts does not have cracking and flexible connection, all motors and contactors are not overheat. b. Static load test 1.25 times rated load, all mechanisms work well, the crane stops 20-30 min as trial load is lifted 10 cm high, then measure main girder down deflection(theodolite, ruler). Put down trial load to measure main girder upper camber, repeat 3 times, steel structure does not have permanent deformation; 4. How to make highway bridge concrete girders? Highway Bridge concrete girders could be made by 4 methods: Full span prefabrication. Segment girder prefabrication. Full span cast-in-place girder. Segment cast-in-situ. 5.How about maintenance of bridge launcher? a. Lubricating. b. Steel wire rope. c. Spreader. d. Pulley block. e. Wheels. f. Brake.
China HSHCL 180T road bridge launcher equipment is a professional design for U type bridge machine required for erection of city rail transit construction beam. As a kind of structure section, the U beam has good noise reduction effect, low construction height, high utilization ratio of cross section space. Because of U type beam for thin-walled opening structure, the traditional bridge rack beam cannot be applied directly. Unable to realize the traditional function of carrying beam traversing, beam body installation can only be achieved by traversing the crane. Therefore Shenghua heavy group U type bridge erecting machine with "front overhead crane beam, acquired vehicle girder, two cranes synchronous walking, then synchronized fall beam" of the process, simple operation, safe and stable. China HSHCL 180T road bridge beam launcher equipment is mainly used in the Inter-city railway building projects, such as metro way, light rail transit, etc. As economy and public transportation develop, inter-city railway is vigorously building in developing countries, such as China, Indonesia, Philippine, Vietnam, Myanmar, Russia, Kazakhstan, etc. As the great project of One Road One Beltimplement deeply, this Ugirder beam launcher cranes are of great potential market in the world. Ubridge girder is just like a tunnel without cover; which not just largely reduces the overall height of the viaduct bridge structure, but also largely shield the train noise.
180 ton concrete beam bridge beam launcher machine is used in the erection of precast beam bridges for span by span method of construction for precast beam girders like T beam, U beam, etc. This self-beam launcher is suitable for bridge construction over river, valley or highway and so on. 180 ton concrete beam bridge beam launcher machine is suitable for the construction of bridge for roads, railways and other bridge erection construction site. Its main function is to lift the prefabricated beams, then transported onto the prefabricated pier. It has big difference from the general cranes. It requests high security. Packing & Delivery Packing 1. Electric parts are packed by high quality plywood crate, to reduce distortion in conveying. 2. Main beams, end beams and electric hoist are packed by plastic woven cloth. It can reduce abrasion when transport. Delivery 1. If the size of 180 ton concrete beam bridge beam launcher machine are suitable for container ship, usually by container. 2. If the size is too big, usually by bulk ship or by container after truncation; Transport ways are based on reducing cost for you and keep the crane performance. Delivery time Within 30 to 40 working days after the receipt of deposit. Transportation Generally 35 days to 50 days to destination port.
Railway bridge erecting beam launcher crane 180t 200t is used in the erection of precast beam bridges for span by span method of construction for precast beam girders like t beam, u beam, etc. This self-beam launcher is suitable for bridge construction over river, valley or highway and so on. Railway bridge erecting beam launcher crane 180t 200t is suitable for the construction of bridge for roads, railways and other bridge erection construction site. Its main function is to lift the prefabricated beams, then transported onto the prefabricated pier. Hshcl railway bridge erecting beam launcher crane 180t 200t has big difference from the general cranes. It requests high security. Our company Henan shenghua heavy crane group is a big enterprise specialized in researching, developing, producing and exporting. It mainly produces hshcl railway suspension bridge erecting beam launcher crane 180t 200t and all kinds of accessories, which widely cover machinery, metallurgy, electric power, railway, water conservancy, ports, terminals and other industries. Shenghua heavy crane group have more than 600 staff, and covers 200, 000 square meters. Our advantages: A. More than 50 r&d personnel with advanced science and technology B. More than 400 sets advanced production processing equipment and inspection equipment C. Independent intellectual property rights to develop energy saving bridge cranes, gantry cranes, and electric hoist E. Obtain iso 9001 certificate and more than 10 series of patent certificates F. Efficient service and competitive products G. Export more than 100 countries
mtr 260t u beam beam launcher crane mtr 260t u beam beam launcher crane is a professional design for U type bridge machine required for erection of city rail transit construction beam. As a kind of structure section, the U beam has good noise reduction effect, low construction height, high utilization ratio of cross section space. Because of U type beam for thin-walled opening structure, the traditional bridge rack beam cannot be applied directly. Unable to realize the traditional function of carrying beam traversing, beam body installation can only be achieved by traversing the crane. Therefore Shenghua Heavy Crane Group U type bridge erecting machine with "front overhead crane beam, acquired vehicle girder, two cranes synchronous walking, then synchronized fall beam" of the process, simple operation, safe and stable. mtr 260t u beam beam launcher crane is mainly used in the Inter-city railway building projects, such as metro way, light rail transit, etc. As economy and public transportation develop, inter-city railway is vigorously building in developing countries, such as China, Indonesia, Philippine, Vietnam, Myanmar, Russia, Kazakhstan, etc. As the great project of One Road One Belt implement deeply, this U girder beam launcher cranes are of great potential market in the world. U bridge girder is just like a tunnel without cover; which not just largely reduces the overall height of the viaduct bridge structure, but also largely shield the train noise. Safety Features Safety is the most important issue for cranes. To ensure the safety, the following safety devices are equipped in mtr 260t u beam beam launcher crane. Crane traveling limit switch. Overload protection device. Lifting height limit device. Voltage lower protection function . Phase sequence protection function. Emergency stop function. Rain cover for outside hoist, driving units, electric cubicle. Warnings indicator : flashing nights and warning sounds. Wireless ir detector for anticollision.
260t u type double truss beam launcher is a professional design for u type bridge machine required for erection of city rail transit construction beam. As a kind of structure section, the u beam has good noise reduction effect, low construction height, high utilization ratio of cross section space. Because of u type beam for thin-walled opening structure, the traditional bridge rack beam cannot be applied directly. Unable to realize the traditional function of carrying beam traversing, beam body installation can only be achieved by traversing the crane. Therefore 260t u type double truss beam launcher, acquired vehicle girder, two cranes synchronous walking, then synchronized fall beam" of the process, simple operation, safe and stable. 260t u type double truss beam launcher is mainly used in the inter-city railway building projects, such as metro way, light rail transit, etc. As economy and public transportation develop, inter-city railway is vigorously building in developing countries, such as china, indonesia, philippine, vietnam, myanmar, russia, kazakhstan, etc. As the great project of , one road one belt, , implement deeply, this , u, , girder beam launcher cranes are of great potential market in the world. , u, , bridge girder is just like a tunnel without cover; which not just largely reduces the overall height of the viaduct bridge structure, but also largely shield the train noise.
160 ton road bridge erection beam launcher equipment machinery is used in the erection of precast beam bridges for span by span method of construction for precast beam girders like T beam, U beam, etc. This self-beam launcher is suitable for bridge construction over river, valley or highway and so on. 160 ton road bridge erection beam launcher equipment machinery is suitable for the construction of bridge for roads, railways and other bridge erection construction site. Its main function is to lift the prefabricated beams, then transported onto the prefabricated pier. It has big difference from the general cranes. It requests high security. Packing & Delivery Packing 1. Electric parts are packed by high quality plywood crate, to reduce distortion in conveying. 2. Main beams, end beams and electric hoist are packed by plastic woven cloth. It can reduce abrasion when transport. Delivery 1. If the size of 160 ton road bridge erection beam launcher equipment machinery are suitable for container ship, usually by container. 2. If the size is too big, usually by bulk ship or by container after truncation; Transport ways are based on reducing cost for you and keep the crane performance. Delivery time Within 30 to 40 working days after the receipt of deposit. Transportation Generally 35 days to 50 days to destination port. FAQ 1. What is the information should I provide when inquiry about the 160 ton road bridge erection beam launcher equipment machinery? 1.1 We need the Bridge Drawing, the Maximum longitudinal slope and the Maximum Transverse slope. 1.2 The Girder/beam drawing. 2. What are inspection standard for load test of 160 ton road bridge erection beam launcher equipment machinery? 2.1 Dynamic load test 1.1 times rated load, main girder does not down deflection, all mechanisms work well, performance parameters meet the design demand, all limit switches and safety protection interlock devices are reliable, all spare parts does not have cracking and flexible connection, all motors and contactors are not overheat. 2.2 Static load test 1.25 times rated load, all mechanisms work well, the crane stops 20-30 min as trial load is lifted 10 cm high, then measure main girder down deflection(theodolite, ruler). Put down trial load to measure main girder upper camber, repeat 3 times, steel structure does not have permanent deformation; 3. How to make highway bridge concrete girders? a. Full span prefabrication. b. Segment girder prefabrication. c. Full span cast-in-place girder. d. Segment cast-in-situ.
Double truss bridge construction beam launcher equipment Double truss bridge construction beam launcher equipment is used in the erection of precast beam bridges for span by span method of construction for precast beam girders like T beam, U beam, etc. This self-beam launcher is suitable for bridge construction over river, valley or highway and so on. Double truss bridge construction beam launcher equipment is suitable for the construction of bridge for roads, railways and other bridge erection construction site. Its main function is to lift the prefabricated beams, then transported onto the prefabricated pier. It has big difference from the general cranes. It requests high security. FAQ 1. What is the information should I provide when inquiry about the Double truss bridge construction beam launcher equipment? 1.1 We need the Bridge Drawing, the Maximum longitudinal slope and the Maximum Transverse slope. 1.2 The Girder/beam drawing. 2. What are inspection standard for load test of Double truss bridge construction beam launcher equipment? 2.1 Dynamic load test 1.1 times rated load, main girder does not down deflection, all mechanisms work well, performance parameters meet the design demand, all limit switches and safety protection interlock devices are reliable, all spare parts does not have cracking and flexible connection, all motors and contactors are not overheat. 2.2 Static load test 1.25 times rated load, all mechanisms work well, the crane stops 20-30 min as trial load is lifted 10 cm high, then measure main girder down deflection(theodolite, ruler). Put down trial load to measure main girder upper camber, repeat 3 times, steel structure does not have permanent deformation. 3. How to make highway bridge concrete girders? a. Full span prefabrication. b. Segment girder prefabrication. c. Full span cast-in-place girder. d. Segment cast-in-situ.
100 ton bridge construction beam launcher 100 ton bridge construction beam launcher is used in the erection of precast beam bridges for span by span method of construction for precast beam girders like t beam, u beam, etc. This self-beam launcher is suitable for bridge construction over river, valley or highway and so on. 100 ton bridge construction beam launcher is suitable for the construction of bridge for roads, railways and other bridge erection construction site. Its main function is to lift the prefabricated beams, then transported onto the prefabricated pier. It has big difference from the general cranes. It requests high security. Faq 1. What, s the information should i provide when inquiry about the 100 ton bridge construction beam launcher? 1.1 we need the bridge drawing, the maximum longitudinal slope and the maximum transverse slope. 1.2 the girder/beam drawing. 2. What are inspection standard for load test of 100 ton bridge construction beam launcher? 2.1 dynamic load test 1.1 times rated load, main girder does not down deflection, all mechanisms work well, performance parameters meet the design demand, all limit switches and safety protection interlock devices are reliable, all spare parts does not have cracking and flexible connection, all motors and contactors are not overheat. 2.2 static load test 1.25 times rated load, all mechanisms work well, the crane stops 20-30 min as trial load is lifted 10 cm high, then measure main girder down deflection(theodolite, ruler). Put down trial load to measure main girder upper camber, repeat 3 times, steel structure does not have permanent deformation; 3. How to make highway bridge concrete girders? A. Full span prefabrication. B. Segment girder prefabrication. C. Full span cast-in-place girder. D. Segment cast-in-situ.