low relaxation high tensile strength pc strand is mainly used for concrete structure,such as railway and highway, overhead crane construction ,multi-floor industrial building floor and roof reinforcement for sports stadiums and etc,products are widely applied to the major domestic rail,road,and construction,The size including:9.53mm/12.7mm/15.24mm/9.3mm/12.5mm/15.7mm/17.8mm etc with tesile strength 1860Mpa
low relaxation high tensile strength pc strand is mainly used for concrete structure,such as railway and highway, overhead crane construction ,multi-floor industrial building floor and roof reinforcement for sports stadiums and etc,products are widely applied to the major domestic rail,road,and construction,The size including:9.53mm/12.7mm/15.24mm/9.3mm/12.5mm/15.7mm/17.8mm etc with tesile strength 1860Mpa
Power - master electric wire rope hoists designed & manufactured as per is: 3938 are compact and modular with easy in operation & maintenance.
Frame
All steel fabricated machined and bolted type. The gear box is rigidly aligned with the end load plates by substantially holding the transfer members which also form the motor platform for foot mounted motors.
Rope drum
Goods lift / cage hoist
Power - master goods lift / cage hoist are designed to suit client’s specific requirement using superior quality raw material and bought out items.
Manufactured in capacities ranging from 0.5 tons to 7.5 tons with normally cage size of 3 mtrs. X 3 mtrs. X 3 mtrs. With collapsible gate with required lift and upto ground + 10 floor.
Goods lift / cage hoist are guided in steel guide member (t & c section) with hoisting and lowering operations performed by our electric wire rope hoist.
Low relaxation high tensile strength pc strand is mainly used for concrete structure, such as railway and highway, overhead crane construction , multi-floor industrial building floor and roof reinforcement for sports stadiums and etc, products are widely applied to the major domestic rail, road, and construction, the size including:9.53mm/12.7mm/15.24mm/9.3mm/12.5mm/15.7mm/17.8mm etc with tesile strength 1860mpa
Low relaxation high tensile strength pc strand is mainly used for concrete structure, such as railway and highway, overhead crane construction , multi-floor industrial building floor and roof reinforcement for sports stadiums and etc, products are widely applied to the major domestic rail, road, and construction, the size including:9.53mm/12.7mm/15.24mm/9.3mm/12.5mm/15.7mm/17.8mm etc with tesile strength 1860mpa
Fabricated from rolled steel sections or plates and welded together to form a box with suitable stiffening wherever required. End carriage consist two nos. Double flanged solid forged wheels for long travel motion. These wheels are mounted on axle with anti-friction spherical roller bearings.
Hoisting mechanism
The wheels of each end carriage are driven by independent synchronized drive system mounted near each end carriage. The drive system comprises of crane duty electric motor, gearbox and brake.
Platform
7112 Cranes Lifts Suppliers
Short on time? Let Cranes Lifts sellers contact you.
A gantry crane has a hoist with trolley which runs horizontally along gantry rails, usually fitted underneath a beam spanning between uprights which themselves have wheels so that the whole crane can move at right angles to the direction of the gantry rails.
We are one of China's largest Forklift truck factory. The main export to South Africa, Africa and other countries and regions. The best quality of supply Forklift truck, most professional service team.
For more information,please http://www.sinoacm.com/
LH Type Electric Hoist Bridge Crane is composed of box-shaped bridge, trolley travelling mechanism, cab and electric equipment. It adopts fixed electric hoist installed on cab frame as lifting mechanism. The cab uses LD drives to run, while the trolley has two types of drive, LD type and QD type.
Since 40 Years, Ahmedabad based Crane Company manufacturing of Double Girder Cranes, E.O.T Crane, Bridge Cranes 0.5 - 500 Ton. Double Girder Cranes are designed with adequate factor of safety in compliance with the IS-3177 norms. The structured parts of these Double Girder EOT Cranes are designed & manufactured by a team of skilled as per IS-807. We understand customer’s requirements and make sure to satisfy them by offering Single Girder Cranes or Double Girder Cranes.
Our range of EOT Cranes are widely used for heavier loads and longer span. Moreover, these Overhead Cranes have an advantage of more height as the hook can be lifted up between the girders.
Double Girder EOT Crane Specification:
1. The structural parts of the Overhead Bridge Cranes are designed and manufactured as per IS-807.
2. These types of Double Girder Overhead Travelling Cranes are used for heavier loads and longer spans.
3. These Electric Overhead Traveling Cranes are widely used in various applications like transporters, trenches, erection of bulky equipment, shifting of heavy loads, mine quarries, heavy fabrication units and others.
4. They offer the advantages of low headroom as the hook can be lifted up between the girders.
5. All components are carefully selected for 'Crane duty' applications.
Wooden box with plastic rap, As per customer demand, Export packing
We provide one-stop service to customers (design, manufacturing, installation, and after-sales service) and specialize in making passenger elevator, home elevator, condo elevator, hospital elevator, cargo lift, and service lift.
Type: scissor lift
Load Capacity: 500kg
Max lifting Height: 10m
Work height: 12m
Table size: 1600mm*900mm
Guardrail: |¦Ì25 rectangular tube
Speed: 4-6m/minute
Hydraulic cylinder: |¦Ì90*1pc
Motion mode/traction: Manual and mechanical traction
Hydraulic fluid: HM-32# in winter, HM-46# in summer, Double steel net high pressure tube
Sealing ring: Japan NOK sealing
Pump station: Anshan pump station, 380V/2.2KW
Control System: Electric control box button up and down
Electrical components: DELIXI brand
Channel steel: Frame at the bottom use 10# channel steel,axis pin 45#heat treated steels
Driving motor power: 30AMP/110V
Emergency stop button: Installed Manual hydraulic lowering valves, in case of power cut off suddenly.
Options of colors: Orange or Blue or optional
Packaging of transport: Wooden box
Control System: button control on the power box
We can customerize the lift according to your requirements. Could you please tell us your requirements?
Standard wooden case for export
Weight: 1600kg
Dimension: 2700*1550*2380mm
Pneumatic telescopic mast has the characteristics of light-weight, low collect-height, heavy load, being suitable for all-weather using and strong corrosion resistance and etc.. It has heavy load and simple structure and it is convenient for operation.
Range of application: the product can be used on ground, vehicle-mounted telescopic mast system equipment and shipboard. Antenna, ptz, lighting lamp, camera, communication equipment, and meteorological instrument and so on can be mounted on the top of telescopic mast. It is widely used in public security, fire-fighting, communication, weather, municipal construction, various natural disasters and emergency spot rescue at night and many other areas. It can be mounted on various vehicle models like satellite news gathering, outside broadcast van, public security command vehicle, emergency communication vehicle and other special vehicles. Besides, it can be used as illumination carrier in sport fields. Its maximum extended height is 30m and maximum load is 500kg.
