Find Verified Cranes Lifts Suppliers, Manufacturers and Wholesalers

Gearbox, drive axle and other core components are self-made together, key components are imported, low failure rate, reliable quality;
Heli new generation casting steering bridge, good performance, high reliability, long life;
The whole machine cover, internal frame rib plate structure, high strength and reliable quality;
New machine locking mechanism, machine opening and closing more flexible and reliable locking; The main structural parts of the vehicle have high safety factor and strong bearing capacity.
LED energy-saving lamps, high brightness, low energy consumption, long life;
IP56 protection level of modular electrical system, safe and easy to maintain;
The lifting system is equipped with buffer function, which makes the cargo drop smoothly and the operation safer.
Optimize the heat dissipation air duct and configure high performance heat dissipation water tank to improve the heat dissipation performance of the whole machine.
Equipped with load sensing hydraulic system to improve operating efficiency and reduce vehicle fuel consumption;
Using suspension roof protection technology, greatly reduce the vibration of the vehicle, improve the comfort of operation;
Equipped with a car handle, reversing, light handle car layout, small diameter steering wheel, ergonomic seat, easy to operate, comfortable experience;
Instrument panel height sinking, balance weight tail optimization, effectively increase the driver's front and rear vision;
Large machine cover opening Angle, oil filter and other maintenance components are external, more convenient repair and maintenance;
Fully enclosed car-like instrument panel, beautiful appearance, strong affinity.

Gearbox, drive axle and other core components are self-made together, key components are imported, low failure rate, reliable quality;
Heli new generation casting steering bridge, good performance, high reliability, long life;
The whole machine cover, internal frame rib plate structure, high strength and reliable quality;
New machine locking mechanism, machine opening and closing more flexible and reliable locking; The main structural parts of the vehicle have high safety factor and strong bearing capacity.
LED energy-saving lamps, high brightness, low energy consumption, long life;
IP56 protection level of modular electrical system, safe and easy to maintain;
The lifting system is equipped with buffer function, which makes the cargo drop smoothly and the operation safer.
Optimize the heat dissipation air duct and configure high performance heat dissipation water tank to improve the heat dissipation performance of the whole machine.
Equipped with load sensing hydraulic system to improve operating efficiency and reduce vehicle fuel consumption;
Using suspension roof protection technology, greatly reduce the vibration of the vehicle, improve the comfort of operation;
Equipped with a car handle, reversing, light handle car layout, small diameter steering wheel, ergonomic seat, easy to operate, comfortable experience;
Instrument panel height sinking, balance weight tail optimization, effectively increase the driver's front and rear vision;
Large machine cover opening Angle, oil filter and other maintenance components are external, more convenient repair and maintenance;
Fully enclosed car-like instrument panel, beautiful appearance, strong affinity.

Telescopic platforms are used for exterior cleaning of buildings, maintenance and repair of electrical lines, construction sites, cutting trees, etc. Used in business. Booms are manufactured from high strength special steel. The support legs are designed with a series opening system. Security packages are available for the hydraulic and electrical system.


basket lighting projector.
the system can be locked onto the support feet.
automatic balancing system for basket is available.
Emergency hand pump.
stop button on the control panel.
basket 1000-100000 v electrical isolation.
vehicle engine stop system.
high maneuverable support feet for all kinds of ground conditions.

1. Continuously overall promotion makes our lifting capacity of crane be improved once and once again.

2. 43 m main boom , two section jibs (9.5m ,16m).

3. Optimized central slewing position increases the lifting capacity of the crane over rear.

4. Large outrigger span improves the working stability of the crane greatly,

5. Adopt internationally advanced structure analysis and calculation methods to develop the lifting capacity of crane deeply.

6. Leading boom manufacturing process in trade.

Wire Rope, Multi Leg Slings, Webbing Slings, Wire Rope Sling, Endless Slings, Nylone Rope, Chain Pulley Block, Crane Hook, Plate Lifting Hook, Pipe Lifting Hook, Oblong Ring, Whip Checks, D-Shakle,

Hydraulic telescopic knuckle boom marine deck crane for port and ship
The crane is controlled from an open platform above the slewing ring. One motions each (hoisting ,slewing or luffing) can be done with full load.Each hydraulic circuit is provided with equipment for limiting hydraulic pressure to preset values corresponding with crane capacity. The crane is provided with an automatic hook stop in top position.Over load safety device.Luffing up- down. The luffing cylinder is designed for safe buffering in extreme positions.
Shanghai Bangding Machinery Equipment Co.,Ltd.

hydraulic straight stiff boom deck marine crane
The crane is equipped with a hydraulic power pack unit outside crane body. Electric motor and pump motor is in the HPU, which includes out-put shaft, drivingthe hydraulic3pump by the flexible connector.
Project Manager: Daisy

Telescopic knuckle boom marine deck crane
The crane is controlled from an open platform above the slewing ring. One motions each (hoisting ,slewing or luffing) can be done with full load.Each hydraulic circuit is provided with equipment for limiting hydraulic pressure to preset values corresponding with crane capacity. The crane is provided with an automatic hook stop in top position.Over load safety device.Luffing up- down. The luffing cylinder is designed for safe buffering in extreme positions.
Project Manager: Daisy

CAT 3512

Feature:Jib Crane
Condition:New
Application:Workshop, Warehouse, Wharf Etc
Rated Loading Capacity:3ton-5ton Or On Request
Rated Lifting Moment:40KN
Max. Lifting Load:5ton Or On Request
Max. Lifting Height:6, 9, 12, 18, 24, 30
Span:On Request
Place of Origin:CHINA
Brand Name:Mingdao
Certification:CE ISO SGS
Warranty:2 Years
After-sales Service Provided:Engineers available to service machinery overseas
Product Name:jib Crane
Crane feature:
Easy operated jib crane
Control method:remote, cabin
Lifting mechanism:Electric Hoist
Type:Travelling crane
Colour:Optional
Power Source:Local Actual Condition
Lifting speed:on request
Main electrical parts:Delixi Siemens

Nostin Stone lifting spreader beam, with WLL - 5 ton, 2 MTR.
DOS & DONOTS
Center hook lifting W.L.L. is 1.5 ton.
Side hook lifting W.L.L. is 5 ton.
Do keep the loaded spreader clear of obstacles any contact could cause beam failure
Do ensure correct use of appropriate top slings, do not twist any slings unnecessarily
Do not hang any load from the spreader tube or flanges
Do not rig the lower slings more than 6 degrees from vertical
Individual components can be heavy and extreme care must be taken if manual handling.

NOSTIN spreader beam have a complete modular range. that allows to assembly on the sport one or multiple spreader beam of 1 to 36 meter long and upto 750 ton kg.

The Nostin aiutomatic Glass Lifter is the perfect equipment that you can use in the glass lifting industries. This equipment has automatic self-adjustment. It is very dureable and dependable for glass lifting and racking.

General
The Brick Grabs Lifter is made to mechanically lift, move and place various bricks size without the need to hook up additional hydraulics or electrical for it to operate. Clamping jaws are equipped with durable rubber to hold tight materials. This device can be used with different types of cranes such as overhead cranes, mobile cranes, truck-mounted cranes or forkliftsâ?¦ in the factory or on construction site. The load does not have to be palletized and can be handled from inconvenient positions with limited space. The grab has adjustable plunge depth â?? convenient when you handle loads of varying heights.

General

Nostin Pallet Crane Fork offers a flexible lifting solution for loading, unloading, handling and transporting heavy materials within production environments. Nostin Pallet Crane Fork is a crane attachment engineered to optimize efficiency for overhead lifting for material handling systems. The Pallet Crane Fork is especially helpful to maximize efficiency in production environments with narrow aisles or for areas that may be inaccessible to forklifts. It becomes a multitalented lifter for the handling of palletized and packaged goods with capacity is up to 2500kg.

Features

High strength welded steel construction for maximum strength and durability.
Moves palleted items efficiently and safely into different production environments.

It can be utilized with a crane to address lifting needs.

Nostin Spreader Beam 3-METER-5-TON SPREADER BARDOS & DONOTS
Center hook lifting W.L.L. is 1.5 ton.
Side hook lifting W.L.L. is 5 ton.
Do keep the loaded spreader clear of obstacles any contact could cause beam failure
Do ensure correct use of appropriate top slings, do not twist any slings unnecessarily
Do not hang any load from the spreader tube or flanges
Do not rig the lower slings more than 6 degrees from vertical
Individual components can be heavy and extreme care must be taken if manual handling.
Recommended top sling types:Textile slings, wire rope slings with soft eyes and chain slings with small end fittings. If thimble eyes are used withwire rope slings, make sure sling angle is 30 degrees or less. Other types exist but not all are suitable due to endfitting size, particularly larger capacity chain hook and thimble eyes

Nostin Forklift Coil Boom Lifter, which could have the capacity upon the request on our end user. This is one of our most successful product, which we are delivering overseas.

Rocla AGV Forklift ( Made in Finland )
Model: AWT88CF25TF8100E
TRUCK WEIGHT: 1390 KG
BATTERY VOLTAGE : 48 V
QTY : 7
Each: 30000 USD

Model:LA-10-120
Brand LEEO
Load Rated 1000 KG
Max Lift Height 1200 MM
Platform Material: Steel or Aluminum Alloy
Platform Dimension (Width* height) 2000 * 1800 MM(also can do customized)
Platform Weight 295-400 KG(depends on material)
Operating Voltage DC12V/24V
Power 2KW
Lift Speed 60-90mm/s(adjustable)
System Pressure 18MPa

Tail lifts make it much easier to safely load and unload trucks and are synonymous with cost efficiency, flexibility and a high level of operating comfort for users.
We're the professional manufacturer of high quality Tail lift with competitive price! Such as Cantilever lifts, Fold-Away lifts, Vertical lift, Dock leveler, etc. We have the CE and ISO certification for all of our goods.

IMK 30.5 cable crane
This Crane is designed for work with high tonnage loads, or great height loads. It is equipped with a set of telescopic booms, cable winch, and cab, mounted on a rotary table featuring bearing and crane gear, providing endless turning.

ASSEMBLY: On all types of chassis of medium or long heavy duty national trucks with PBT minimum of 26,000 Kgf and permit for overweight operation.

Categorias: Cable cranes, Cranes Tags: a cabo, guindastes