Fabric specs: EP-80~EP-630Belt width(mm): 300~2600Polyester conveyor belts also called EP conveyor belts, whose tensiion resistant body is canvas woven by polyester in warp and polyamine in weft. The belts have the characteristics of low elongation in warp and good troughability in weft, good water resistance, good wet strength, no mould it is suitable for medium, long distance and heavy-load transportation of materials.
Belt strength(ST_NO. ): ST_630~ST_5400Belt width(mm): 600~26001. UsageSteel cord conveyor belts are widely used in high strength, long distance and heavy load than sportation of materials, and they are also used in high strength and distance transportation of materials on special occasions.2. Characteristic(1)High tensile strength: The belts are suitable for large span, long distance transportation of materials.(2)Small elongation in use: The belts need only a very short take-up stroke distance.(3)Small diameter of drive pulley: The bell body has a layer of longitudinally arranged steel cords as its skeleton, and thus is flexble and fatigue - resistant. Therefore, drive pulley of smaller diameter can be used to make the equipment smaller.(4)High adhension between rubber and steel cord: The steel cords are coated with zinc on their surface, and also the rubber has the property of good adhesion with steel cords. Therefoe the rubber is tightly adhered to the steel cords that is shock resistant and hard to peel off, which make the belt long life.(5)Even tension of steel cords: Out of our advanced techniques in manufacturing, the steel cords are very equably arranged and have the same tension, so the velts are well balanced in tunning and diffcult to run away.(6)Good troughability: As the belt body has no transverse skeleton, it is easy to form a deep trough, so the belts can load more materials and prevent the materials from eacaping.(7)Inspection of the belt with X-rays: Users can use X-rays to inspect damages of the skeleton, the steel
Fabric specs: NN-80 ~ NN-630Belt width(mm): 300~2600Nylon is one of the best quality synthetic fibers that the rubber industry use nowdays. The nylon canvas is woven by nylon fibers both in warp and in weft, it is most widely used fabric in rubber industry, and its outstanding merits are high abrasion resistance, high tensile strength and good fatigue.
It works to carry speedy of box, package, jug bag and like this loose or in packs. It can use fixed height or adjustable units. It can be speed adjustable according to customer need. The belt selection is made according to type of product which will carry.
It can select pvc, rubber and wire belt types.
We can produce speacial manufacturing for desired sizes.
It is assumed pick-up will be performed with:
- Transported material: powder or fluent plastic granules;
- Apparent specific weight 0.7 kg/dm³;
- Initial pick-up length having inclination α = 0° and α = 30°;
- Rotary spiral with 580 rpm (930 rpm applications are also possible).
Load capacity from 120 kg/h-10,000 kg/h.
7118 Cranes Lifts Suppliers
Short on time? Let Cranes Lifts sellers contact you.
Materials: stainless steel wire, steel wire, galvanized iron wire, polyester fiber, etc.
Weaving and characteristics: conveyor belt can be made into different types, including chain link type belt mesh, balanced weave, reinforced and other types offering different mesh opening and features.
Uses: conveyor belt mesh is used widely in heat condition, food processing, pharmacy, glass printing and some special equipments.
It can be used as core of various fabrics, plastic canvas rope of steel cord conveyor belt and the decision between the canvases.
No.2 Product advantages:
1. High efficiency, low labor intensity, light in weight, applicable to different types of environment;
2. Unique domestically, advanced internationally.
No.3 Technical parameters:
1. Power supply: voltage 380V 50Hz;
2. Power: 3 KW;
3. Weight: 96 kg;
4. Applicable Range: EP, NN, and the joint layers of cotton & canvas layered.
No.4 Method of usage:
1. Firstly, please peel off about 15cm width steel wire at the end from the wire rope conveyer belt. Remove off rubber from the both sides, and then fixed the adhesive tape.
2. Secondly, please install the up and down blades, and put the down blade right on the wire rope center, and adjust the pressure of the bolt, and then press the handles, and connect the wire rope with drag machine to work, and bring along the blade to make the rubber layer disengage from the rope, and the end of stripping.
No.1 Usage:
The Conveyor Belt Misalignment Switch is used for detecting the deflection value and distortion of the belt.
It keeps the edge of belt from damaging and the material leakage due to deflection of the belt. It is a kind of protective switch that outputs alarm and shutdown signals automatically.
No.2 Working Principle & Structural Characteristics:
The misalignment switch has two level active function.
The first level is used for alarm;
The second level is used for shutdown automatically. As the belt conveyor running, if the belt is deflected and contacts the vertical miller of the switch at the same time, vertical miller rotates itself, as the deviation increases, and the vertical miller will be squeezed to deviate.
When the deflection angle is over 12íp, the first-level works and outputs alarm signal.
When the deflection angle is over 30íp, the second-level works and outputs shutdown signal.
The first level switch is used for alarm.
It connect the signals with adjusting deflection device, it can realize the function that there is no need shutdown but to adjust automatically.
The second-level is used for shutdown. If connect the signals with control lines, it can be realize the function that it will stop as serious deflection of the belt.
After eliminating the obstacles, the belt will depart from the vertical miller and it will be restore automatically.
In order to adopt the long-term outdoor usage, the product is adopted integrated closed technics. And the inner accessories are adopted vulcanization technics. The outside accessories except the shell are adopted multi-layer chromeplate technics. The shell is adopted casting aluminum, and the surface adopts electrostatic spraying technics to adapt the usage in bad environment.
Main Technical Index
Ambient temperature 40 ípC to +60 ípC
Relative temperature not more than 90%
Atmospheric pressure 80 ~ 110 Kpa
Altitude not more than 2,000 M
Useful time the switch 10,000
Insulation voltage AC1000V, testing one minute
CWP Machinery manufactures spiral conveyors in various diameter, various length, and various types according to the purpose from carbon steel or stainless steel materials.
Chain Conveyors
It is used for the high capacity transport of the granule materials in narrow space, in short or long distance. It usually operates in the galleries of the underground mining firms. It is durable through its driving gear, pads, and conveyor chutes of high quality steel against corrosion.
Rubber conveyor belt manufactured from nn, ep, cotton fabric upto 1200mm width in many qualities such as
General purpose quality
Heat resistant,
Super heat resistant
Fire proof
Food grade etc.
Top/ bottom cover tickness - 2mm to 10mm
Grades - m - 24, n - 17, etc
Hdpe fabric export packing or wood packing as required by buyer
2 - tuffline hr grade rubber conveyor belt withstand high temperature ( upto 125¦c ) which is required in high temprature material transfer in steel plants, mines, hot mix plants etc.
Applications - :
Recommended for conveying hot, highly abrasive materials transportation, the special technology heat resistant rubber compound is used to protect conveyor belt top/bottom cover surface from damage due to heat in material.
Carcass & general information :
Cotton, ep, nn, etc, maximum width - 1200mm, can be manufactured as per buyers specific requirement ep & nn fabrics are very light in weight as compared to cotton or other fabrics resulting in maximum strength and cost factor, we offer very competitive prices and best quality, best laue for money offer
For any special requirement please contact our sales team
General purpose nylon conveyor belt of any thickness upto 1200mm width, open edge or moulded edge, best quality, minimum price
General purpose nn conveyor belt
As per indian standards :
Is 189
Characteristics :
1 - friction and abrasion resistant belt materials.
2 - tuffline general purpose rubber conveyor belt
Applications - :
Recommended for conveying highly abrasive materials transportation, the special technology rubber compound is used to protect conveyor belt top/bottom cover surface from damage due to friction in material, steel pallets, iron ores or other ores etc.
Carcass & general information :
Nn nylon fabric, maximum width - 1200mm, can be manufactured as per buyers specific requirement nn fabrics are very light in weight as compared to cotton or other fabrics resulting in maximum strength and low cost factor, we offer very competitive prices and best quality, bestquality for money offer
For any special requirement please contact our sales team
We manufacture and install complete feed mill plant for cattle and poultry, which includes auto-batching units, hammer mill, feed mixers, pellet dies, pelleting machines, auto-bagging units, screw conveyors and related installation equipments.
Pls send us the capacity requirement for weight, dimension
Because the cotton-canvas , nylon or ep-canvasas the carcass, the belt has good elasticity, excellent trough ability, and low enlongation.The rubber cover, which is made from chemical resistant materials, has fine anti-chemical corrosiveness and very good physical properties.It can convey materials ph4-10.
It is suitable for conveying materials with chemical corrosiveness in chemical factory, chemical fertilizer factory, paper mill, mining industry etc.
Length:20-400m
Package:no more than 400mtrs/roll
Width:300-1800mm
7118 Cranes Lifts Suppliers
Short on time? Let Cranes Lifts sellers contact you.
