Find Verified Cranes Lifts Suppliers, Manufacturers and Wholesalers

The Great Wall network with horseshoe chain cellular network
The Great Wall network with horseshoe chain, plate mesh belt, metal mesh belt, towing, honeycomb mesh belt track
A flat metal plate and metal screw rod composed of round wear, mesh belt light weight, mesh gap, smooth surface, smooth operation, will not walk. Do the washing, drying, cooling, conveying line heat treatment. The food bread line, the spiral tower refrigeration machinery in conveying, spraying, the widespread use of Qing Dynasty washing machinery and heavy transport machinery. Is a friction drive for continuous material transport machinery, application of the Great Wall network with the material in the transmission line from the initial feed point to the final discharge point between the formation of a material delivery process. The Great Wall net belt which can transport pieces. The material, also can convey goods. In addition to the pure material handling, matching can also process and production processes of various industrial enterprises in the requirements, the formation of the rhythmic flow transport line. So the the Great Wall network with wide application In modern industrial enterprises, is the automatic device and in the modern automation line the essential important parts. With great wall material of low carbon steel A3, steel 45# and 1Cr13 heat-resisting steel, stainless steel, 304 stainless steel, 1Cr18Ni9Ti stainless steel. 0Cr18Ni14NO2CU2 resistance to heat and acid resistant steel and other. Automatic line of products are widely used in light industry machinery, sterilization machine, silk printing and dyeing, food, power, pharmaceutical, garment processing and other industries the delivery.
Procurement of the the Great Wall network with the need to provide data information:
1 mesh width: the total width of the the Great Wall network with the total width. The diameter of the wear axis: connecting the the Great Wall mesh belt mesh diameter of the rod.
2 the length of the rod segment: the distance from the axis distance between the two connecting rods of the the Great Wall mesh belt mesh.
3 inside width: the Great Wall mesh belt mesh back bend.
4 transverse pitch: two mesh back to the curved angle spacing.
5 the Great Wall network with a normal material selection: 201 stainless steel 304 stainless steel, iron, can also be selected according to the specific requirements of the material.

The belts are widely used in curing, electronic circuit board industry solid melting, drying, reflow. Cap of plastic industry drying; food industry for chocolate, biscuits, baked fillets, frozen, dried, the belts can be used to edge chain drive. The belts: also called ladder shaped mesh belt or a net this belt, usually gear transmission belt, has advantages of good air permeability, tensile force uniform, fine workmanship, this belt has flexible rotation, good stability, high temperature resistance, pressure resistance, corrosion resistance, long life and other characteristics; the belts: material mainly adopts 202 stainless steel, 304 stainless steel, stainless steel 1cr18ni9ti special material made by stainless steel, high temperature resistance, corrosion resistance, good air permeability and other special features; the belts: mainly used in printing and dyeing, radio, electronic, food machinery and scientific research units.

Spiral mesh belt
Spiral net belt is commonly applied to the frozen food industry, is one of the essential for quick freezing machine accessories, imported computer net belt machine production, the net surface is tough and durable, not easy to deformation, the biggest feature is turning performance. It can realize the 360 degree turn, and smooth operation, root according to user requirements without mesh or on the mesh belt on both sides of the block edge. Pitch: 19.05mm, 25.4mm, 27.25mm, 27.4mm, 30mm, 31.75mm. plus mesh or mesh of different turning radius: rotation radius = 1.7 x network wide, rotating radius = 2.2 x network wide, rotating radius 1 x network wide material: 304 and 316 stainless steel
The data required for the spiral mesh belt in order to be made to order
1, mesh belt material.
2, the chain of the chain from the chain of the film is thick, high.
3, the effective transmission width of the mesh belt.
4, the diameter of the supporting shaft.
5, the wire diameter pitch of the mesh belt.
6, the total width of the spiral mesh belt.
Flex-link
Positive driven belt in 12.7mm and 25.4mm pitch variations .Used IN straight Runing and radius applications ( inside radivs is 2.2*belt width ), Driven via a stamped U shaped link on each edge joined with mesh overlay for very fine or flat product commonly used on cooling or freezing conveyors and spiral towers in the food processing and baking industries

The main frame of the electric roller conveyor is aluminum profile, with high torque and low power consumption, etc., it can control the speed and direction by PLC. Which is especially suitable for the high speed and stable conveying of bracket and carton, etc.
Machine features of Electric roller conveyor
The conveyor can carry heavy weight.
Internal DC 24V motor.
Convenient installation and stable performance.
Anti-corrosion, wear-proof and high temperature resistance.
Provide customized service.

Chains adopt high quality medium-carbon alloy steel, chain plate material is 40Mn,pin and roller material is 40Cr.High quality material and good heat treatment guarantee excellent anti-shearing force and tensile strength during working.

Application: Chain conveyors are mainly used in the papermaking industry to transport a variety of loose or bundled materials, which can be transported horizontally or with a slope of less than 30°. Mostly used for feeding waste paper, pulp board to pulper.

Application: Chain conveyors are mainly used in the papermaking industry to transport a variety of loose or bundled materials, which can be transported horizontally or with a slope of less than 30°. Mostly used for feeding waste paper, pulp board to pulper.
Chain feed width :1200-2600mm
Capacity feedï¼?60-600m3/h
Motor power:3-55kw

Product introduction:

1.This equipment is placed after production line printer or before and after the equipments of different working

Speed as a buffer;

2.PLC control system,Working is stably and reliably;

3.Easy to operate LED touch screen control interface;

4.FIFO(first in first out),LIFO(last in first out)and pass through function optiona;

5.Fast,smooth,accurate retrieval positioning;

6.Memory function,control the order of pcbs pass in and out;

7.Smooth and parallel width adjustment(leadscrew);

8.SMEMA port is compatible;



Technical parameters

Function

This equipment is placed after production line printer or before and after the equipments of different working Speed as a buffer

PCB thickness

Min0.6mm

MAX PCBs capacity

20pcs(0.6mm thickness PCB)

Cycling time

Approx 10 seconds

Transport direction

Left to right/right to left(optional)

Transport height

900±20mm(or customized)

Air pressure

4-6 bar, MAX10L/minute

Power supply

100-230V AC(customized) single phase, MAX 250V/A

If you want more information ,feel free to contact us .Email :monica@szhonreal.com ,

Product introduction:

1.PLC control system, Working is stably and reliably;

2.Enclosed design ensure the highest security level;

3.Balanced, stable, accurate rotation mode;

4.Easy to operate LED touch screen control interface;

5.Smooth and parallel width adjustment(leadscrew)

6.SMEMA port is compatible;



Technical parameters



Function

This unit is used to change direction in the production line

PCB thickness

Min0.6mm

Cycling time

Approx 15 seconds

Transport direction

Left to right/right to left(optional)

Transport height

900±20mm(or customized)

Air pressure

4-6 bar, MAX 20L/minute

Power supply

100-230V AC(customized) single phase, MAX 300V/A

If you want more information ,feel free to contact us .Email :monica@szhonreal.com ,

Product introduction:

1.PLC control system,Working is stably and reliably;

2.Easy to operate LED touch screen control interface;

3.Fast, stable and accurate stepper motor moves;

4.Enclosed design ensure the highest security level;

5.Customized machine length according to customer requirements;

6.Buffer deceleration design more stable, accurate;

7.Smooth and parallel width adjustment(leadscrew);

8.SMEMA port is compatible;

If you want more information ,feel free to contact us .Email :monica@szhonreal.com ,

Product introduction:

1.Steel frame, static painted surface;

2.Balance weight design improve the stability;

3.Optional pass/inspection working mode;

4.Smooth and parallel width adjustment(leadscrew);

5.According the customers damand to customize the stoping PCB number;

6.Variable speed control;

7.SMEMA port is compatible;



Technical parameters

Function

This equipment is used for the connection between the line

PCB thickness

Min0.6mm

Transport direction

Left to right/right to left(optional)

Transport height

900±20mm(or customized)

Power supply

100-230V AC(customized) single phase, MAX 100V/A

If you want more information ,feel free to contact us .Email :monica@szhonreal.com ,

Product introduction:
Our product is made of high-quality material :PBO and kevlar.It is mainly used for aluminum industry.Its temperature resistance can up to 600 degrees for a short time (about 15 minutes) and 500 degrees for a long time.Our factory mastered the most reasonable production process and the best PBO layer thickness and density of the balance point after years of practice and research.We can make sure that we can provide you the best product and the best service.

Specifications:
Brand:HUATAO
material :PBO and kevlar:30%PBO+70%kevlar ,or 20%PBO+80%kevlar
color:brown and yellow
Work temperature: 600 degrees for a short time(15mins)
500 degree for a long time
Length: All size are available
thickness :6mm~12mm
Maximum internal diameter:168mm
Minimum internal diameter:20mm

Advantages:
1. Heat resistance up to 600°C;
2. High density with no delaminating or fuzziness;
3. Abrasion resistance with smooth cutting and even surface;
4. Long service life against high quality;
5. Pollution-free for extrusions;
6. Competitive price and good service after sales.
7. Resin treatment.

Product introduction:
High temperature felt roller is mainly used for aluminum industry, the main function is to transport,transfer extruded aluminum profile. Our product can protect its surface and improve the quality and grade of aluminum. It is made of 100% kevlar or kevlar &carbon mixture.Its work temperature can up to 500 degrees for a short time (about 15 minutes) and 200 degrees for a long time.

Specifications:
Brand:HUATAO
material :100% kevlar or kevlar&carbon mixture
color:yellow and green
The color of 100% kevlar is y ellow. The color of kevlar&carbon mixture is green.
Work temperature: 500 degrees for a short time(15mins)
200 degree for a long time
Length: All size are available
thickness :6mm~12mm
Maximum internal diameter:168mm
Minimum internal diameter:20mm

Advantages:
1. temperature resistance can up to 500 degrees;
2. High density with no delaminating or fuzziness;
3. Abrasion resistance with smooth cutting and even surface;
4. Long service life against high quality;
5. Pollution-free for extrusions;
6. Competitive price and good service after sales.
7. Resin treatment.

Product introduction:
High temperature resistant felt belt is often used in aluminum factory. Our product is made of PBO and Kevlar. It have heat resistance characteristics.Its temperature resistance can up to 600 degrees for a short time (about 15 minutes) and 550 degrees for a long time.

Specifications:
Brand:HUATAO
material :PBO + kevlar + one layer Nomex tension member
color:brown and yellow
Size:Make-to-order
Work temperature:600 degrees for a short time(15mins)
550 degree for a long time
Length:900mm-25000mm
Width:20mm-1700mm
Thickness:5mm-15mm
PBO Thickness: 2mm~8mm

Advantages:
1. Temperature resistance up to 600°C;
2. High density structure;
3. Abrasion resistance with smooth cutting and even surface;
4. Long service life against high quality;
5. Pollution-free for extrusions;
6. Competitive price and good service after sales.

Product introduction:
This product is suitable for third-class and forth-class cooling bed. Our product is made of 100% Nomex and one layer Nomex tension member. It have heat resistance characteristics. Its highest temperature resistance can up to 300 degrees.

Specifications:
Brand:HUATAO
material :100% Nomex + one layer Nomex tension member
color: offwhite
Size:Make-to-order
Highest work temperature:500 degrees
Length:1700mm-11000mm
Width:20mm-1500mm

Advantages:
1.Eco-friendly material
2.Anti-static
3.Good wearability
4. soft and flat surface
5. Small weight, convenient storage
6. Easy to install, everyone can operate
7. The blanket has no joint as a whole and there is no break zone
8. High density structure;

Product introduction:
High temperature resistant felt belt is often used in aluminum factory. Our product is made of 100% Kevlar and one layer Nomex tension member. It have heat resistance characteristics.Its highest temperature resistance can up to 500 degrees.

Specifications:
Brand:HUATAO
material :100% kevlar + one layer Nomex tension member
color: yellow
Size:Make-to-order
Highest work temperature:500 degrees
Length:540mm-13500mm
Width:20mm-2000mm
Thickness:6mm-12mm

Advantages:
1.temperature resistance 500°C
2. soft and flat surface
3. Small weight, convenient storage
4. Easy to install, everyone can operate

These conveyors enable advancing of parcels, packages or similar proslots by means of man power or pneumatic system.

The force is directly applied on rollers; conveyor cylinders ensure progress of material via friction of the load that carries out translatory motion.

Roller clearance, diameter and type can be chosen depending on material to be carried.

23X75 PVC BELT STRAIGHT CONVEYORS


Enables rapid carrying of packaged (such as parcel, package, sack etc.) and unpackaged proslots in a short time.

Belt is selected according to type of proslot to be carried and speed adjustment can be preferred depending on requirements.

It can be used in fixed height or as adjustable unit. Commonly preferred types are PVC, polyurethane, wire belt etc.

Steel Hinged Belt Chips Conveyor
Steel Hinged Belt Chips Conveyor, Steel Swarf Conveyor, CNC Machine Chain Belt Conveyor
Steel Hinged Belt Chips Conveyor, Steel Swarf Conveyor, CNC Machine Chain Belt Conveyor
RUIAO hinged belt conveyors and coolant filtration systems - Automate chip removal and increase your productivity with solutions that safely remove the waste from your processes.Our systems are built based on your requirements and can be custom engineered to manage any chip type and material, scrap, parts, coolant, and coolant filtration.

The chip conveyor can be many types, scraped type/hinged belt type/screw type are both available here, you can take the blank drawing as reference,and then send us your own drawing.

Alternative Features
Overload protection Alternative
Jam protection Alternative
Variable Speed drive Customized
Paint colors blue / white / grey / yellow /green
Incline Angle 60°/45°/30°

Steel swarf conveyor chain belt conveyor Hinge Belt Conveyor:
· compact with high efficiency; it's the most proper machine model for complying with CNC,NCmachine
· plural binged belt width offers you the optimal application for wide range and the effectiveness.
· mono-assembly of link plate with high strength ,precise coordination and stable or silent motion
· a desion of small GAP convex points is available to prevent the chips from adhering due to the powerful ability on removing the chips
· with a limited torque force,it can effectively reduce the damage to the minimum level that caused by improper operation.

Paper Tape Filter Conveyor
High Efficiency Working Chips Conveyor, Chips Conveyor Factory
Paper Tape filter conveyor :
· compact with high efficiency; it's the most proper machine model for complying with CNC,NCmachine.
· plural binged belt width offers you the optimal application for wide range and the effectiveness.
· mono-assembly of link plate with high strength, precise coordination and stable or silent motion.
· a desion of small GAP convex points is available to prevent the chips from adhering due to the powerful ability on removing the chips.
· with a limited torque force,it can effectively reduce the damage to the minimum level that caused by improper operation.
Ruiao Machine Tool Accessories Producing Company was started in 1988. Along with the rapid development of domestic industry over these years, we have completed the transition from a growth company to a mature company that owns an integrated customer service system.
Back in 1996, Ruiao Company began to purchase heavy-duty equipment. This paved the way for later mass production of premium products. As of today, we have manufactured numerous machine tool accessories by using our knowledge gained over decades. Our product range covers 10 series of machine tool accessories.Moreover, machine assembly and commissioning service is also available.