Clean Grade (99.9% to 99.99%) scrap copper wire. The copper wire consists of clean (free of any insulation), unpinned, uncoated, unalloyed copper wire, free of hair wire, brittle burnt wire and excessive oils minimum.
The main features of high-efficiency continuous casting mold copper tube material: high-efficiency continuous casting mold material with good thermal conductivity, high recrystallization temperature, high thermal fatigue resistance, high strength, good wear resistance, long service life, high efficiency continuous casting mold copper tube The main feature of the material is that the overall performance of the above properties of the copper tube material is optimal.
In order to improve the wear resistance of the chrome plating layer and prolong the service life of the copper tube of the mold, a nickel-cobalt alloy coating layer of 0.4-0.5 mm thick is added between the inner surface of the copper tube of the crystallizer and the chrome plating layer as a transition layer. Therefore, it is called nickel-cobalt alloy - hard chrome plating. Referred to as composite copper plated tube. The metal content is: the hardness of the coating is 300-600 HV.
Because nickel-cobalt alloy coating has good chemical corrosion resistance, thermal erosion resistance and wear resistance. It not only blocks the diffusion of Zn, S, Cd and F in the molten steel to the inner surface of the copper tube of the mold, but also acts as a binder between the inner surface of the copper tube of the crystallizer and the chrome plating layer, so that the chrome layer is wear-resistant. The performance has been greatly improved. In addition, after the chrome layer is worn, the nickel-cobalt alloy coating can continue to work instead of the chrome layer, thereby prolonging the service life of the crystallizer copper tube.
The main features of high-efficiency continuous casting mold copper tube material: high-efficiency continuous casting mold material with good thermal conductivity, high recrystallization temperature, high thermal fatigue resistance, high strength, good wear resistance, long service life, high efficiency continuous casting mold copper tube The main feature of the material is that the overall performance of the above properties of the copper tube material is optimal.
In order to improve the wear resistance of the chrome plating layer and prolong the service life of the copper tube of the mold, a nickel-cobalt alloy coating layer of 0.4-0.5 mm thick is added between the inner surface of the copper tube of the crystallizer and the chrome plating layer as a transition layer. Therefore, it is called nickel-cobalt alloy - hard chrome plating. Referred to as composite copper plated tube. The metal content is: the hardness of the coating is 300-600 HV.
Because nickel-cobalt alloy coating has good chemical corrosion resistance, thermal erosion resistance and wear resistance. It not only blocks the diffusion of Zn, S, Cd and F in the molten steel to the inner surface of the copper tube of the mold, but also acts as a binder between the inner surface of the copper tube of the crystallizer and the chrome plating layer, so that the chrome layer is wear-resistant. The performance has been greatly improved. In addition, after the chrome layer is worn, the nickel-cobalt alloy coating can continue to work instead of the chrome layer, thereby prolonging the service life of the crystallizer copper tube.
PNS is very well accepted in Indonesia, India, Pakistan, Bangladesh, Kaohsiung, Taichung and Thailand. It is in 20 ft container and cut under 3-5ft long pieces.
WILSON WALTON / CATHELCO / ACG / NIPPON / CAPAC / JOTUN / WILSON TAYLOR / MORGAN / KC/MME
Our specialties are:
Impressed Current Cathodic Protection Systems (ICCP)
Marine Growth Prevention Systems (MGPS)
Shaft Earthing Device (S.E.D)
Spare parts
Sacrificial Aluminum and Zinc Anodes
Fr-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and ccl is finally formed by hot pressing and curing.
Fr-4 copper clad laminated sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (pcb) for television sets, computers, communications equipment and other electronic products.
The main globle makers listed as below: wilson walton / cathelco / acg / nippon / capac / jotun / wilson taylor / morgan / kc/mme
Our specialties are:
Impressed current cathodic protection systems (iccp)
Marine growth prevention systems (mgps)
Shaft earthing device (s.E.D)
Spare parts
Sacrificial aluminum and zinc anodes
You can contact with me on whatsapp:008613623351268 or fivestarmarine@vip.163.Com
We are the one-stop service station for iccp & mgps systems when your vessel drydock in china. We provide not only spare parts/material but also technical services.
Copper tubing is most often used for supply of hot and cold tap water, and as refrigerant line in HVAC systems. There are two basic types of copper tubing, soft copper and rigid copper. Copper tubing is joined using flare connection, compression connection, or solder. Copper offers a high level of corrosion resistance. Please speak to the Central.
6.We could supply the copper scrap with high quality and competitive price.
1) Our copper scrap includes wires, tubes, and plates, etc.
2)The size is chips or other.
3) Copper content could neet customers need.
Copper wire scrap at 99% purity. Insulation removed through burning.
Copper wire scrap at 96% purity. Insulation removed through burning.
7.Application:
Electrical, light industry, machinery, building industry, national defense industry
Copper Scrap is industry a important sources of the raw materials All kinds of can be recycled Recycling waste production with copper
6.We could supply the copper scrap with high quality and competitive price.
1) Our copper scrap includes wires, tubes, and plates, etc.
2)The size is chips or other.
3) Copper content could neet customers need.
Copper wire scrap at 99% purity. Insulation removed through burning.
Copper wire scrap at 96% purity. Insulation removed through burning.
7.Application:
Electrical, light industry, machinery, building industry, national defense industry
Copper Scrap is industry a important sources of the raw materials All kinds of can be recycled Recycling waste production with copper
6.We could supply the copper scrap with high quality and competitive price.
1) Our copper scrap includes wires, tubes, and plates, etc.
2)The size is chips or other.
3) Copper content could neet customers need.
Copper wire scrap at 99% purity. Insulation removed through burning.
Copper wire scrap at 96% purity. Insulation removed through burning.
7.Application:
Electrical, light industry, machinery, building industry, national defense industry
Copper Scrap is industry a important sources of the raw materials All kinds of can be recycled Recycling waste production with copper
