We, GRINOS CORPORATION, SARL, in JV-Co with major Smelters as RUASHI MINING Co and UFRSD Co, wish to confirm with full legal responsibility, under the penalty of perjury, that our company is the sole and principle mandate of the Supplier/Seller of the Copper Cathode. We further understand that our company will be civilly and criminally liable under our control as certified mandate of the Sellers in view of any subsequent occurrence of fraudulent acts in accordance to the International Chamber of Commerce regulations. This FCO shall be binding either signed electronically or presented as a hard copy and shall be treated with full legal rights and binding upon the two parties pending their signatures. The terms specified in the contract shall apply. Product: Copper Cathodes Purity: 99.99% Quantity: Trial 1.000 MT/ Contract 60,000MT/ 5,000MT per Month. Origin: Democratic Republic of Congo Current location of Material: SMELTER OR SUPPLYING MINING WAREHOUSE (BUYER WILL RECEIVE DELIVERY AT BONDED WAREHOUSE). Price: USD$ 6500.00 per ton, CIF destination Port Contract: 12 months with rollovers Delivery: Immediately in25 days after signing of the contract, issuance of Irrevocable, confirmed, operative and non-transferable LC/BG/SBLC and Buyers instructions. Payment: Letter of Undertaking/ In US Dollars-SBLC MT760/ BCL Block Funds/Electronic Fund Transfer (EFT) after final testing and delivery at the Buyer(s) bonded warehouse in Lubumbashi, Democratic Republic of Congo PROCEDURE: 1. The Buyer sends the LOI, the Seller issues a Full Corporate Offer (FCO) for Buyerâ??s Signature (Acceptance of Quantity, Price and Payment terms) 2. The Seller issues draft contract open for amendments. 3. Both parties confirm draft of contract by endorsing it in PDF format. 4. Buyer nominated bank issues an SBLC for 1.000MT validity via MT-760 by swift to Sellerâ??s Financier bank. 5. Sellerâ??s bank issues 2% PB with 1st month 1.000MT or each batch shipment value PB to Buyerâ??s bank. 6. Delivery commences as Schedule. After shipment arriving at the buyerâ??s port & finishing the unloading & the inspection by SGS then the buyer shall make sure documents in compliance with the credit and pay the total amount for every batch to the Sellers Bank within 3 banking days.
Copper Cathode
**High Purity Selenium** CAS No: 7782-49-2 Melting point: 217C Powder Density: 4.81 g /cm3 Boiling Point: 684.9±1.0 C EC No.: 231-957-4 Se-05 Grade 99.999. The content of Selenium is above** 99.999%**. The total content of Ag, Al, Bi, Cd, Cu, Fe, Ga, In, Mg, Ni, Pb, Sb, Te & Tl is bellow 10 ppm; Ultra Purity Selenium: Se-06 Grade 99.9999. The content of Selenium is above **99.9999%.** The total content of Ag, Al, Au, Bi, Co, Cu, Fe & Ni is bellow 1 ppm. Physical Size: Granule, Powder. Packing: nitrogen shield/ double bags/ customed
Origin: Colombia Loading Port: Cali, Colombia Packing: Pressed and Palletized with Aluminum Bands Delivery Term: CIF ASWP Inspection: SGS (or any similar inspection agency) Payment: By 100% DLC Irrevocable, Confirmed, NON Transferable, Letter of Credit (DLC NT) payable at Loading Port, after SGS inspection or through BG at port of Destination after SGS inspection as per report for Final Quality and Quantity of SGS or any compatible international survey company. Packing: For Shipment in 40' Container Price: FOB $7,500.00 USD x MT PAYMENT TERMS: After signing the Contract, within 10 banking days from the Buyer's signing date, the Buyer's Bank Issues a Non Operative BG or an Irrevocable, Conditional, NON Transferable, Non-operative DLC. SUPPLY GUARANTEE (P/B): After signing the Contract, within 10 banking days from the Buyer's signing date, the Buyer Bank provides to issue a BG or an Irrevocable, Conditional, NON Transferable, Non-operative DLC for the First Shipment so that the Seller can secure the goods and issue a 2% Performance Bond. After that, the BG or DLC becomes Operative automatically. After a successful Trial Shipment, the Buyer immediately provides an Irrevocable, Conditional, NON Transferable, Non-operative BG or DLC for the next monthly shipment, so that the Seller can secure the goods and issue a 2% Performance Bond. After that, the BG or DLC becomes Operative automatically and so on for the next months
Features: 1. Beautiful appearance (oxidation color possible) 2.Excellent strength (adjustable according to application) 3.Improved workability (elongation , strength) 4.Cost Reduction 5.Lightweight (11% ) 6.Price competitiveness (10-20% of price competitiveness) 7.Excellent thermal conductivity (adjustment of copper fraction) 8.hygiene 9. antibacterial
Product: Copper Cathodes Electrolytic Grade (99.97% - 99.99%) Price: LME 15% Trial sale: 5,000- 50,000 T a month Quantity: 60,000- 600,000 T FOR 12 MONTHS Origin: MEXICO Incoterm 2012: CIF Sheet weight: 125 Kg (+ 1%) Net weight per pallet: 2 MT Container weight: 20 MT Gross weight of the container: 22.2 MT Certification: SGS Dimensions: 914 mm X 914 mm X 12 mm Packaging: Palletized in aluminum bands Validity: 15 business days of Exhaustion Existence Payment: Documentary Letter of Credit DLC Swift MT700 Performance Bond (PB) 2% after (DLC) Confirmation The following documents are delivered: - Bill of Lading (B/L) - Certificate of Quality SGS Alfred H Knight - Weight Certificate - Certificate of Origin (NAFTA) - Insurance Policy - Packing List - Commercial Invoice CHEMICAL COMPOSITION Copper (Cu) 99.99% Zinc (Zi)
Product Specifications Product Copper Cathodes Grade A (Electrolytic Copper Grade) Standard Cu Cathode, purity 99,99% Dimension 914mm x 914mm x 12mm (approx.) (36â?³ x 36â?³ x 0.5â?³) Weight of each sheet 125 kg (+/- 1%) Net Weight of each pallet 2mt (metric ton) (+/- 1%) Min. Weight of each container 20mt (approx.) Gross Weight of each container 22.20mt (approx.) Packaging Palletized (Banded by Aluminium Bands)
Product Specifications Product - Copper Cathodes Grade A (Electrolytic Copper Grade) Standard Cu Cathode, purity 99,99% Dimension - 914mm x 914mm x 12mm (approx.) (36 x 36 x 0.5) Weight of each sheet- 125 kg (+/- 1%) Net Weight of each pallet - 2mt (metric ton) (+/- 1%) Min. Weight of each container - 20mt (approx.) Gross Weight of each container - 22.20mt (approx.) Packaging - Palletized (Banded by Aluminium Bands)
Product Specifications Product Copper Cathodes Grade A (Electrolytic Copper Grade) Standard Cu Cathode, purity 99,99% Dimension 914mm x 914mm x 12mm (approx.) (36â?³ x 36â?³ x 0.5â?³) Weight of each sheet 125 kg (+/- 1%) Net Weight of each pallet 2mt (metric ton) (+/- 1%) Min. Weight of each container 20mt (approx.) Gross Weight of each container 22.20mt (approx.) Packaging Palletized (Banded by Aluminium Bands)
Molecular Weight 63.55 Appearance Reddish Metal Melting Point 1085 C Boiling Point 2562 C Density 8.96 g/cm3 Solubility in H2O N/A Electrical Resistivity 1.673 cm @ 20C Electronegativity 1.90 Paulings Heat of Fusion 13.26 kJ mol-1 Heat of Vaporization 300.4 kJ ·mol-1 Poisson's Ratio 0.34 Specific Heat 0.39 kJ/kg K Thermal Conductivity 401 W m-1 K-1 Thermal Expansion (25 C) 16.5 m·m-1·K-1 Vickers Hardness 369 MPa Young's Modulus 110 - 128 GPa
Non-LME Registered Copper Cathodes Electrolytic Grade A Standard Cu Cathode. Origin: DRC Purity: 99.99% with rejection rate below 99.97% Size: 914mm X 914mm X 12mm Weight of each sheet: 125kgs (+/- 2%) Net weight of each pallet: 2MT to 2.5MT (+/- 2%) Min. weight in each container: 20MT approx. Gross weight of each container: 22.50MT approx. Packing: Palletized banded by aluminum bands. LME -12% 100MT Bonded Warehouse, Durban, South Africa 500MT Bonded Warehouse Dar Es Salaam, Tanzania Inspect and Pay for the ready stock, financial instrument for next deliveries.
We offer copper cathode grade M00K 99.99% produced in accordance with GOST 546-01, international standard ASTM B 115-95 and requirements of ST RK ISO 9001-2008 according to the following conditions: The price of one ton of cathode copper on FCA terms (Incoterms 2010) is the average value of the official quotes of the Copper Cash Seller Settlement on the London Metal Exchange (LME) minus 8% 99.99% The quotation period is the values �¢??�¢??of the Copper Cash Seller Settlement quotes on the LME for the month preceding the month of shipment (Quotation period M-1). Minimum volume: 1000 tons per month Payment for products is carried out in the form of 100% prepayment or irrevocable letter of credit. We wish you success and look forward to fruitful cooperation with your company!
Copper Cathodes Grade A (Electrolytic Copper Grade) purity 99.99% (rejection below 99.97%) NON LME Registered Dimension: 914m x 914mm x 12 mm Weight of each sheet: 125kgs (+/- 1%) Packing: palletized banded by aluminum bands Origen: Africa Incoterm: FOB 12 month contract (not spot order is accepted) Perfomance Bond 2% Payment: SBLC + MT 103 after SGS inspection (no other payment is accepted) The Trial order: is part of the contract and included in the SBLC. POP: after accept and sign FCO a video will with your name will be able. Visit Facilities after SBLC Please Only issue a LOI if you or they are ready to buy. It seems obvious but some people use LOI to request a quote and that is not the purpose of this document.
From D.R. Congo No payment in advance 100% SBLC FOB Dar es Salaam
Copper buses, copper busbars
Copper rods, copper wire rods of different dimensions.
Copper Cathode From Congo, Tanzania.
COPPER CLAD > CAC-3PLY Type: CAC 3PLY Cu+Al+Cu Function : * Electric Current Connector * Copper - Aluminum Connector for Electric Current Experiences: Battery Module Busbar for E-mobility and ESS Electric Motor Busbar Advantages over existing solutions: Compared with Copper (ETP) 1) Lightweight (Cu SG 8.95 / CAC SG 3.65) 2) Same weight, More Volume Features: 1. Excellent electrical conductivity (70% IACS) 2. Cost reduction (30%) 3. Lightweight (40%) 4. antibacterial Current application 1) Module Busbar for Battery Pack 2) Transformer Future application 1) Energy Storage System 2) Residential Storage System 3) Motor Stator Busbar 4) Busduct (Busway) Application: - Automobile - Electric/Electronics - Other
COPPER CLAD > CMC-3PLY Type: CMC-3PLY (Copper + Mild Steel + Copper) Function : Electric Contact Experiences: ELB, MCCB Advantages over existing solutions: Compared with ETP, Brass, Phosphor Bronze, 1) Lightweight ( CMC-3PLY SG 8.07 ) 2) Same weight, More Volume 3) Cost Reduction (20 - 30%) Features: 1. Excellent electrical conductivity (35% compared to copper) 2. Lightweight (10% ) 3. Cost reduction (35% ) 4. increased strength Current application 1) ELB, MCCB Future application 1) Home Appliances Contact Application: - Electric/Electronics - construct - Other
COPPER CLAD > CSC-3PLY Type: CSC-3PLY (Copper + Stainless + Copper) Function : Electric Current Connector Experiences: Electric Contact for Switch required Spring properties Advantages over existing solutions: Compared with ETP, Phosphor Bronze 1) Lightweight (Cu SG 8.95 / CSC SG 8.0) 2) Same weight, More Volume 3) Cost Reduction (20 - 30%) Features: 1. Beautiful appearance (oxidation color possible) 2. Excellent strength (adjustable according to application) 3. Improved work ability (elongation , strength) 4. Cost reduction (30% ) 5. Excellent electrical conductivity (28% IACS ) 6. Lightweight (11.5% ) 7. antibacterial Current application 1) Battery Contact 2) Home Appliances Contact Future application 1) Finger Gasket Application: - construct - Electric/Electronics - Communication, mobile - automobile - Other
