Copper coated wire /rubber hose wire 0.25mm Item: Copper Plated Hose Reinforcement wire Nominal diameter:0.2 mm normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated Copper coated wire /rubber hose wire 0.25mm (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
The house of ARS BRAND RECYCLING MACHINES proudly introduces HORIZONTAL SCRAP SHEAR IN INDIA to solve all scrap processing problems of a Melting Furnace with a single machine without any labors only need one operator. OPERATION of ADVANTAGE Brand Horizontal Scrap Shear 600 On the Scrap Shear the PLC interface should show Home Position, (in one of the 3 programs) in this position Push the Auto cycle Button and start charging the Mixed Scrap consisting of Commercial, HMS 2, HMS 1 can be put without any sorting by a Grab/Magnet into the Hopper of the Horizontal Shear, on a continuous basis, within minutes you will see the scrap sheared in size of max height 16 coming out of the front end of the Shear. The charged scrap is first pre-compressed first hydraulically at 3 levels, densities than Sheared the cut size of max height 16 length These 16 long pieces are perfectly fit to be charged as first charge Furnace lift the out coming scrap with magnet and take to the furnace for melting. TYPESOF SCRAP ADVANTAGE BRAND HORIZONTAL SHEAR CAN PROCESS ; ,HMS 2 ,PIPES & STRUCTURES ,SHEET AND PLATES ,CAR BODIES ,MIXED SCRAP
Price: 100-200tons = lme-1% 200-500tons = lme-2.5% 500-1000tons = lme-5% Payment: l/c at sight(irrevocable) Shipping term:fob Origin : laos Type :copper cathode Copper : 99, 97% min. Cobalt : 0, 2ppm max. Lead : 0, 2ppm max. Aluminum : 0, 5ppm max. Manganese : 0, 1ppm max. Nickel: 0, 2ppm max. Antimony : 0, 1ppm max. Arsenic : 0, 1ppm max. Silica : 0, 3ppm max. Bismuth : 0, 1ppm max. Tellurium : 0, 05ppm max. Silver : 10ppm max. Selenium : 0, 3ppm max. Sulphur : 4ppm max. Magnesium :0, 4ppm max. Oxygen : 0 Purity : 99, 99%-99, 97% min. Thickness : 0.1mm-150mm Width : 10mm-1500mm Length : 1m-12m, or as required Hardness : 1/16 hard, 1/8 hard, 1/4 hard, 1/2 hard, full hard. Surface : polished, bright, oiled, hair line, brush, mirror, or as required
All of our products are produced in our industry house based in Turkey and fullfill all Europeen CE Standarts. We can produce for you on order all thickness of busbars.
Product specs will be invated like how the order will be given,
SOLID UN NO.:2811. SOLUTION UN NO.: 2810 ; Hazardous class : 6.1 Molecular weight:315.9 Stability:2 years in cool places avoiding light. Storage:ã??In cool place, avoid direct sunlight CPT specs: Packaging: 25KG net each round cardboard drum, 4.5MT /20FCL; with pallet or without pallet Application of CPT: Copper Pyrithione is primarily used as an antimicrobial in industrial products such as antifouling paints and in the protection and preservation of fiber, leather, and rubber. Advantages: Copper Pyrithione is a highly effective, broad spectrum biocide used to control bacteria, algae, and fungi. Safety: The concentrated form of Copper Pyrithione (100% active ingredients-, powder) is moderately toxic if swallowed; however, Copper Pyrithione is an emetic which means that accidental ingestion of the material should result in vomiting or purging the material out. Inhaling the concentrated dust or mist of Copper Pyrithione is considered to be highly toxic and may be fatal if inhaled. Dermal exposure to Copper Pyrithione is considered to be non-irritating. .
price: 100-200tons = LME-1% 200-500tons = LME-2.5% 500-1000tons = LME-5% we can recieve to use L/C or T/T
We are looking for substantial buyers who are end user or agent regarding Copper Cathode. As this matter, we can supply this good as very high quality, competitive price and short delivery by our best service. So please notice the following specification. - Commodity : Copper Cathode - Origin : Congo, Zambia, Chile or Other countries. - Purity : 99.99% min - Term of Price : FOB Steinweg Ndola or CIF ASWP - Payment : By BG, SBLC or Irrevocable, Non Transferable, Confirmed Documentary L/C 100% at sight. For CIF term of payment, The buyer can pay full amount at destination after buyer's inspection for cargo. - Shipment : Within 30 days after receipt of L/C or T/T. - Capacity : 5,000mt up to 10,000mt monthly - Loading Port : Port of Tanzania, South Africa, Chile or Other countries.. - Inspection : By SGS or equal qualified surveyor at loading port as seller's expense and at unloading port as buyer's expense. If you have interests and any question for above specifications, please do not hesitate to get in touch with us and to send LOI issued by end buyer in anytime. Then we will provide full information such as FCO and draft SPA based on attractive price right now. Thanks.
COPPER CATHODES Grade A (Electrolytic Copper Grade) (LME standards) Standard Cu Cathode-1, purity 99, 97-99, 99 %Dimension: 914 mm x 914 mm x 12 mm (LME standards) Weight of each sheet: 105 kg (+/- 1 %) Net weight of each pallet: 2 MT (+/- 1 %) Min.weight each container: approx. 20 MTI Gross weight each container: approx. 22.20 MT Packing: Palletized banded by aluminums bands 2. CHEMICAL COMPOSITION Copper (Cu) min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S 4 PPM Iron Fe 2 PPM Silver(Argent 10 PPM Lead Pb 0.2 PPM Nickel Ni 0.2 PPM Selenium Se 0.3 PPM Antimony Sb 0.1 PPM Silica Si 0.3 PPM Cobalt Co 0.2 PPM Arsenic As 0.1 PPM Bismuth Bi 0.1 PPM Manganese Mn 0.1 PPM Tellurium Te 0.05 PPM Aluminum Al 0.5 PPM Magnesium Mg 0.4 PPM Zinc Zn 0.4 PPM
Copper Wire Scrap grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
We are looking for substantial buyers who are end user or agent regarding Copper Cathode. As this matter, we can supply this good as very high quality, competitive price and short delivery by our best service. So please notice the following specification. - Commodity : Copper Cathode - Origin : Congo, Zambia, Chile or Other countries. - Purity : 99.99% min - Term of Price : FOB Steinweg Ndola or CIF ASWP - Payment : By BG, SBLC or Irrevocable, Non Transferable, Confirmed Documentary L/C 100% at sight. For CIF term of payment, The buyer can pay full amount at destination after buyer's inspection for cargo. - Shipment : Within 30 days after receipt of L/C. - Capacity : 5,000mt up to 10,000mt monthly - Loading Port : Port of Congo, Zambia, Chile or Other countries.. - Inspection : By SGS or equal qualified surveyor at loading port as seller's expense and at unloading port as buyer's expense. If you have interests and any question for above specifications, please do not hesitate to get in touch with us and to send LOI issued by end buyer in anytime. Then we will provide full information such as FCO and draft SPA based on attractive price right now. Thanks.
Clean Grade (99.9% to 99.99%) scrap copper wire. The copper wire consists of clean (free of any insulation), unpinned, uncoated, unalloyed copper wire, free of hair wire, brittle burnt wire and excessive oils minimum.
We can supply 99.99% PURE copper cathode from Zambia at LME-14% CIF ASWP , Only end buyer or direct mandate contact with LOI/ ICPO of end buyer only. Supply ability: upto 50000Mt x 12. Accept SBLC and can issue 2% PB.
Size : 125*125*8000 125*125*16000 125*125*812 R4000, R60000
The main features of high-efficiency continuous casting mold copper tube material: high-efficiency continuous casting mold material with good thermal conductivity, high recrystallization temperature, high thermal fatigue resistance, high strength, good wear resistance, long service life, high efficiency continuous casting mold copper tube The main feature of the material is that the overall performance of the above properties of the copper tube material is optimal. In order to improve the wear resistance of the chrome plating layer and prolong the service life of the copper tube of the mold, a nickel-cobalt alloy coating layer of 0.4-0.5 mm thick is added between the inner surface of the copper tube of the crystallizer and the chrome plating layer as a transition layer. Therefore, it is called nickel-cobalt alloy - hard chrome plating. Referred to as composite copper plated tube. The metal content is: the hardness of the coating is 300-600 HV. Because nickel-cobalt alloy coating has good chemical corrosion resistance, thermal erosion resistance and wear resistance. It not only blocks the diffusion of Zn, S, Cd and F in the molten steel to the inner surface of the copper tube of the mold, but also acts as a binder between the inner surface of the copper tube of the crystallizer and the chrome plating layer, so that the chrome layer is wear-resistant. The performance has been greatly improved. In addition, after the chrome layer is worn, the nickel-cobalt alloy coating can continue to work instead of the chrome layer, thereby prolonging the service life of the crystallizer copper tube.
The main features of high-efficiency continuous casting mold copper tube material: high-efficiency continuous casting mold material with good thermal conductivity, high recrystallization temperature, high thermal fatigue resistance, high strength, good wear resistance, long service life, high efficiency continuous casting mold copper tube The main feature of the material is that the overall performance of the above properties of the copper tube material is optimal. In order to improve the wear resistance of the chrome plating layer and prolong the service life of the copper tube of the mold, a nickel-cobalt alloy coating layer of 0.4-0.5 mm thick is added between the inner surface of the copper tube of the crystallizer and the chrome plating layer as a transition layer. Therefore, it is called nickel-cobalt alloy - hard chrome plating. Referred to as composite copper plated tube. The metal content is: the hardness of the coating is 300-600 HV. Because nickel-cobalt alloy coating has good chemical corrosion resistance, thermal erosion resistance and wear resistance. It not only blocks the diffusion of Zn, S, Cd and F in the molten steel to the inner surface of the copper tube of the mold, but also acts as a binder between the inner surface of the copper tube of the crystallizer and the chrome plating layer, so that the chrome layer is wear-resistant. The performance has been greatly improved. In addition, after the chrome layer is worn, the nickel-cobalt alloy coating can continue to work instead of the chrome layer, thereby prolonging the service life of the crystallizer copper tube.
3000MT/MONTH
24 Mt fortnightly 24 Mt in 40 Feet container
PNS: Plates and structures. PNS is very well accepted in Indonesia, India, Pakistan, Bangladesh, Kaohsiung, Taichung and Thailand. It is in 20 ft container and cut under 3-5ft long pieces. Average loading is 24-26 MT in 20 ft GP.
WILSON WALTON / CATHELCO / ACG / NIPPON / CAPAC / JOTUN / WILSON TAYLOR / MORGAN / KC/MME Our specialties are: Impressed Current Cathodic Protection Systems (ICCP) Marine Growth Prevention Systems (MGPS) Shaft Earthing Device (S.E.D) Spare parts Sacrificial Aluminum and Zinc Anodes
