- COMMODITY: Electrolytic Copper Cathode Grade A - Delivery: Immediately - Specification: Copper Cu 99.97% -99-99% - Dimensions : 914 mm x 914 mm x 12 mm (LME Standards) Weight of each sheet: 125 Kilograms (Approximately �± 2%) - Documents Seller will provide all relevant documents (POP); these include Analysis Certificate, Certificate of Ownership, and Certificate of Origin. Bill of Lading, Packing List and Insurance 110% are obtained once the goods are loaded into the vessel. - Procedures i. The Buyer issues LOI & parties execute an NCDA ii. Seller Mandate issues FCO which is signed and returned by the Buyer iii. The Seller issues draft Sales and Purchase Agreement (SPA) for Buyer's review and acceptance. iv. The Buyer returns amended SPA with Buyer's signature and seal together with Proof of Funds (RWA Bank letter or MT799 or Bank Comfort Letter). v. The Seller countersigns and completes SPA with all applicable banking coordinates. vi. The Seller confirms the availability of the Copper Cathodes and provides a full set of Proof of Product (POP) documents. vii. Buyer's bank issues draft DLC MT700 to seller's financier's bank and the parties confirm the verbiage of the LC payment guarantee. viii. Buyer issues revolving LC in the amount equal to one month's supply (10,000MT) and this activates Seller's 2% Performance Bond (PB).. ix. Seller arranges shipping of the trial shipment of 1,000 MT and provides the Buyer with full shipping documentation, including SGS or equivalent inspection at port of lading. x. Buyer pays for the trial shipment by T/T SWIFT MT103 within 72 hours of SGS/CIQ inspection at Buyer's discharge port. The process repeats for each of 36 monthly shipments.
Copper cathode LME standard, Non LME registered, Price: CIF $6,700 MT/ -20% LME/ Payment terms: 100% DLC, irrevocable and non-transferable, Origin: Congo and Zambia or Tanzania Purity: >99.99% - 99.97% - 99.95%. Product: Copper Cathodes (Electrolytic Grade A) Size: 914mm X 914mm X 12mm (appr. ) Standard Specs. ------------------------------------------------------------------------------------------------- Copper wire millberry scrap High quality of copper wire millberry scrap Price: CIF $4900 MT/ 100% DLC, irrevocable and non-transferable, No Chinese bank/ HSBC and Citi bank in China are acceptable Prime 50 banks are acceptable. Please provide LOI / ICPO for further discussion.
* 272 Kilograms of Monatomic Ultra Pure Electrolytic Copper Powder (Copper) * Type : PMS-M4 * Purity Grade : 99.993% wt. * Average Particle Size : 18.05 microns * Particle Configuration : Skeleton * Particle Size Intervals : 0-30 microns covers 96.73% of specimen volume * Price : FOB USA U$800/Kilograms * Location : USA
- Product: Copper Wire Scrap Milberry, CU(Min) 99.95%-99.99%(Max) - Price: a competitive price over the market price - Payment Terms: Irrevocable & transferable 30-Day-DLC (MT700) with 2% PB (with inactive LC) and 110% Insurance at destination port by TT (MT103) after QQR from SGS or Equivalent
Copper Powder We can offer fine powders with high dispersion and sharp size distribution. â?¢(1)Thick film conductive paste (sintering /polymer type) â?¢(2)Electrode material for LTCC / MLCC â?¢(3)Through-hole paste â?¢(4)Conductive adhesive Model Name CUSP10, CUSP15, CUSP20, CUSP25, CUSP30, CUSP40, CUSP50, CUSP55, CUSP70
We are looking for substantial buyers who are end user or agent regarding Copper Cathode. As this matter, we can supply this good as very high quality, competitive price and short delivery by our best service. So please notice the following specification. - COMMODITY : Copper Cathodes Grade A (Electrolytic Copper Grade) . - PURITY: 99.99%. - GRADE : Non Registered LME, Grade A - ORIGIN : DRC (Congo), Peru - TERM OF PRICE : Less of LME or U$6,600 /MT CIF ASWP. - PAYMENT : 100% Irrevocable Confirmed, Non-Transferable LC at Destination after buyers inspection. - QUANTITY : 10.000 MT Monthly. - MINIMUM QUANTITY: 500mt and trial quantity is 500mt. - PERIOD OF CONTRACT: More 12 Month. - PACKING METHOD: Copper Shall Be On Pallets Weighing Approximately 2 Metric Tons With Aluminum Straps Loading of The Containers Approximately 22.20mt Per 20\' Container - LOADING PORT: Dar es Salaam, Tanzania or Durban, South Africa. - DESTINATION PORT : ASWP - PERFORMANCE BOND : 2% of the LC value. - INSPECTION: SGS at Loading Port * SPECIFICATIONS OF COPPER SHEET/PLATE : â?¢ Product: Copper Cathodes (Electrolytic Grade A) Min. Cu-purity: 99.99% â?¢ Size: 914mm X 914mm X 12mm (appr.) â?¢ Weight of each sheet: 125kgs +/- 1% Net weight of each pallet: 2M/T +/- 1% Min. weighs in each container: 20 M/T appr Gross weight of each container: 22.2M/T appr. If you have interests and any question for above specifications, please do not hesitate to get in touch with us and to send LOI issued by end buyer in anytime. Then we will provide full information such as FCO and draft SPA based on attractive price right now. Thanks.
we have offer of copper cathode of 5000MT per monthX12~24month at LME-26%(=7027$perMT) included 94.96$perMT of buyer side commission in CIF with Its payment terms of SBLC(MT760) or BG&LC(MT700) at destination Port and we are looking for the copper scarp of 200MT(trial) and 5000MT per Month x12month~24month at 2500USD per MT in CIF with its payment terms of MT 103 or MT 799 or MT 760.if buyer send his ICPO with BCL, seller can send Contract Draft and His Past records on
Al-Brass: Al-Brass is an alloy containing aluminium. It is frequently used for heat exchangers due to its high corrosion and seawater resistance property. Application: Condenser for thermal/nuclear power generation, condenser for vessels, feedwater heater, etc. Al-Brass : C4430/KSD5301 Al-Brass : C6871/KSD5301 Al-Brass : C6872/KSD5301 Al-Brass : C6872/KSD5301
Copper+Nickel Alloy Pipe consisting of copper and nickel alloy; it is proper to use at high temperature due to its high degree of corrosion and seawater resistance. Application: It is mainly used in engine components, condensing engines, or sheaths. 25% nickel alloy is used to coins, 40% nickel alloy (constantan) is for thermocouple or electricity resistance wire. The monel metal that consists of a small amount of iron and silicon and 60-70% nickel alloy is used to turbin wings, valves or components of mine machines because it has a high degree of corrosion resistance and gets less damaged at high temperature. Cu-Ni Alloy : C7060/KSD5301 Cu-Ni Alloy : C7100/KSD5301 Cu-Ni Alloy : C7150/KSD5301 Cu-Ni Alloy : C7164/KSD5301
Manufacture alloy bars in various shapes and sizes by extruding and drawing of billet. Copper Alloy Bar - Forged Bar : C3771/KSD5101 Copper Alloy Bar - Free Cutting Bar : C3604/KSD5101 Copper Alloy Bar - Naval Bar : C4622/KSD5101 Mainly used to produce vessel parts or shafts due to its high degree of corrosion and seawater resistance.
Draw a billet, a primary processed goods, to make it a circular pipe. Reconduct drawing to produce brass tubes in various shapes and sizes. Copper Alloy Tube has a fine degree of Mechano-Luminescence property and plating and drawing performances. It is lead-free and mainly utilized as a material for heat exchanger, faucet or fire extinguishing unit. Decide after checking dies production. Jointless Copper Alloy Tube C2600/KSD5301 Jointless Copper Alloy Tube C2700/KSD5301
Benefits - easy and quick to install - save time and money on installation - no seams that allow moisture to flow in and water to drip - easy to transport Reaction to fire classification : d-s3-d0 This classification has been carried out in accordance with en 13501-1:2007
Cooper cathode By shipper method
I am supplying the Copper wire scrap and Copper cathode. We can suggest you the discounted price based on LME.
We select only the best products from our domestic manufactures to export to over 10 countries worldwide including US, Australia, Canada and Japan. At this point, we are seeking reliable distributors/business partners in Canada. We've been exporting to the top manufactures and distributors in the aforementioned countries and the relationships with our long-term business partners have proved our commitment to superior quality of the products and services. It can be also custom made.
Collecting place of product :copper and brass factory. -.Chemical component(%) -.Cu = More than 15% Packing= more than 1ton/per bag 20TONS/20FT
Copper scrap We are looking for credible suppliers of copper scraps and brass scraps from all over the world. If you can provide us with the copper and brass scraps regularly and continually, please contact to us with sincere informations about your company, quantity, its kinds, its photoes that you own presently. We are looing forward to your favorable and rapid reply. Export standard packing
Beryllium Copper, Chrome Copper, Tellurium Copper
* Copper - Tough Pitch Copper : C1100 - Phosphorus Deoxidized Copper : C1201 / C1220 / C1221 - Oxygen Free : C1010 / C1020 - Oxygen Free with Ag Copper : C1040 / C1050 / C1070 * Beryllium Copper : C17510 / C17410 / C17200 / C17300 * Bronze - Phosphor Bronze : C5111 / C5102 / C5191 / C5212 - Aluminium Bronze : C6140 / C6300 * Brass - Red Brass : C2100 / C2200 / C2300 - Yellow Brass : C2600 / C2680 / C2720 / C2800 * Nickel Silver: C7570 / C7451 / C7521 / C7541 / C7701
Product Description : Purity : 99.97%, 99.99% Product origin : China
