Specifications
1.0.10~4.50mm
2.Use in winding machine/motor/transformer
3.Good heat resistance
Polyesterimide enameled copper wire (eiw/qzy)
1. Thermal classification: f h class
2. Diameter: 0.1~4.50mm
3. Performance and characteristics of products:
A> very good heat resistance, heat shock resistance and solvent resistance.
B> good for high-speed winding due to its
C> crazing in solvent with stress.
4. Main application areas:
Dry transformer. Heat resistance. Generator. Electric tool motor. High speed motor and generator. Hvt for microwave oven.
Used for automotive coils as relays and ignition coils, in transformers and in solenoids.
Polyester(amide-imide) magnet wire
Specifications range: diameter 0.100-- 3.500mm
Implementation of the standards: iec317, nema, jis, gb6109, enterprise standard or customer standard
Product characteristics: it has excellent resistance to heat, wear and refrigerant.
Application areas: it is applied to electric machinery with high temperature, high speed and frequent start, impervious
Category: high temperature resistant and refrigerant resistant enamelled
Thermal class: 220c
Copper tube is mainly used for air conditioning and refrigeration, installation of air conditioner, refrigerantion, construction, water, gas, ect. We can produce the copper tubes according to astm, en, bs, as/nzs, jis standard. The copper tubes we producing are: 1. Copper pancake coil, 2. Copper lwc coil, 3. Copper straight tube, 4. Copper capillary tube, 5. Insulated copper tube, 6. Plastic-coated copper tube, 7. Brass straight tube, 8. Condenser tube, 9. Aluminum clad copper tube, 10. Square copper tube, 11. Copper wire, 12. Copper bar.
Polyester-imide enameled copper round wire, class 180
This wire has baked varnish insulation mainly composed of theic-modified polyester-imide resin over its copper round conductor.
Features: excellent electrical, chemical and mechanical properties. Widely used for heat-resistance electrical components. May develop crazing.
Applicable standard: mw30-c. Iec60317-8. Gb/t6109.6. Jis c 3202.8
Typical applications: heat-resistance motors, automotive components, 4-ways reversing valves, coils of induction cooker, motor for electric tools, magneto, dry-type transformer.
Range of conductors' diameter: 0.05-0.30mm
Solderable polyester-imide enameled copper round wire, class 180
This wire has baked varnish insulation mainly composed of solderable polyester-imide resin over its copper round conductor.
Features: solderable at 470 f¦ in 3 seconds. Few pin-holes.
Applicable standard: mw77-c. Iec60317-23. Gb/t6109.13.
Typical applications: automotive relays, heat-resistance transformers, 4-ways reversing valves, magneto.
Range of conductors' diameter: 0.05-0.30mm
According to customer's specification or executive international standards.
Polyurethane enameled copper round wire with a bonding layer, class 130
Features: self-bonding by solvents or heat. Easily colored in a variety of colors. Sloderable at 380 f¦.
Applicable standard: jis c 3202.7
Typical applications: speaker coils, driving motor for watch, vibrator motor, laser head and magnetic head coils, other non-frame coils.
Polyurethane enameled copper round wire with a bonding layer, class 155
Features: self-bonding by solvents or heat. Easily colored in a variety of colors. Sloderable at 400 f¦.
Applicable standard: jis c 3202.7
Typical applications: speaker coils, vibrator motor, other non-frame coils.
Thermosetting type polyester or polyesterimide enameled copper round wire with a bonding layer, class 180
Features: excellent adhesion at high temperature through fusion an setting processer.Higher softening temperature.
Applicable standard: iec 60317-37
Typical applications: high output voice coils, high output motors, electrical tools, heat-resistance motors.
According to customer's specification or executive international standards.
Polyurethane Enameled Copper Round Wire, Class 130
This wire has baked varnish insulation mainly composed of polyurethane resin over its copper round conductor.
Features: Most widely used enameled wire. Solderable at 380 f¦. Easily colored in a variety of colors. Excellent dielectric characteristics at high frequencies. Few pin-holes.
Applicable Standard: MW75-C. IEC60317-4. GB/T6109.4. JIS C 3202.6.
Typical Applications: Relays, Small motors, Small transformers, Magnetic heads, Coils for telecommunication equipment.
Range of Conductors' diameter: 0.016-0.55
Polyurethane Enameled Copper Round Wire, Class 130
This wire has baked varnish insulation mainly composed of modified polyurethane resin over its copper round conductor.
Features: Higher cut-through temperature than UEW/130. Solderable at 400 f¦. Easily colored in a variety of colors. Excellent dielectric characteristics at high frequencies. Few pin-holes.
Applicable Standard: MW79-C. IEC60317-20. GB/T6109.10. JIS C 3202.6.
Typical Applications: Relays, Small-motors, Small-transformers, Ignition coils, Water valves, Magnetic heads, Coils for telecommunication equipment.
Range of Conductors' diameter: 0.016-0.55
Polyurethane Enameled Copper Round Wire, Class 180
This wire has baked varnish insulation mainly composed of modified polyurethane resin over its copper round conductor.
Features: Higher cut-through temperature than UEW/155. Solderable at 420 f¦. Easily colored in a variety of colors. Excellent dielectric characteristics at high frequencies. Few pin-holes.
Applicable Standard: MW82-C. IEC60317-51. GB/T6109.23. JIS C 3202.6.
Typical Applications: Relays, Micro-motors, Mini-transformers, Ignition coils, Water valves, Magnetic heads, Coils for telecommunication equipment.
Range of Conductors' diameter: 0.016-0.55
Polyurethane Enameled Copper Round Wire for Relay
This wire has baked varnish insulation mainly composed of modified polyurethane resin over its copper round conductor.
Features: Excellent consistency of conductor resistance, Excellent consistency of insulating film thickness. High solt-fill. Few pin-holes. Suitable for high speed winding equipment.
Applicable Standard: JIS C 3202.6. IEC60317-20.
Typical Applications: Power relays, High frequency relays, Time relays, Automotive relays, Telecom relays, Sealed relays.
Range of Conductors' diameter: 0.016-0.55
we produce Brass Wire Mesh, from 6mesh/0.71mm to 180mesh/0. 05mm; Phosphor Bronze Wire Mesh, max 400mesh/0.03mm; Copper Wire Mesh, from 6mesh/0.71mm to 100mesh/0.102mm
Material: Brass Wire,Red Copper Wire, Phosphor Bronze Wire
Weaving Type: Plain Weave, Twill Weave, and Dutch-Plain Weave
Features: Brass Wire Mesh is also named Brass Wire Cloth, it has better abrasion resistance, better corrosion resistance, higher strength and lower electrical conductivity. Copper Wire Mesh is also named Copper Wire Cloth, it has better abrasion resistance, better corrosion resistance. Phosphor Bronze Wire Mesh is also named Phosphor Bronze Wire Cloth, it has features of corrosion resistance, wear resistance and tear resistance.
Application: Brass Wire Mesh is used in sieving diversified pellet, powder, porcelain clay and glass, chinaware printing, filtering liquid and gas. Copper Wire Mesh is mostly used as filters in a lot of industries. Phosphor Bronze Wire Mesh is mostly used as filters in a lot of industries.
We a company that professionally produces electrode copper wires and tinned copper wire, red copper wire, phosphor bronze wire and some special wires. As well we are professionally to manufacture wires and cables making machinery. Such as wire drawing machine, stainless wire cutting machine, and wire enameling machine. Hongshye enamelled copper wires, are high speed, high accuracy, superior straightness and superior discharge, which are easy for wire feeding, can improve the production. Adopt special material , and adopt japanese advanced machinery and advanced technical provide cheap electrode wires for all kinds of advanced wire edm machinery .And we can accept customer's special requirements
