Buy Copper Tube Terminals 25mm in UK that are RAIL- approved and are suited for use in public transit, rolling stock, and signalling installations. They will make a high tensile crimped joint that complies with BS4G 178 Part 2-1986 and RSE/RTD 024 Part 7 - Issue A (London Underground Approval) E6487 A2. Order the best quality Copper Tube Terminals Online from Kafton UK Cable Ties.
Buy online Copper Tube Terminals 16mmin UK that are RAIL- approved and are suited for use in public transit, rolling stock, and signalling installations. They will make a high tensile crimped joint that complies with BS4G 178 Part 2-1986 and RSE/RTD 024 Part 7 - Issue A (London Underground Approval) E6487 A2. Order the best quality Copper Tube Terminals Online from Kafton UK Cable Ties.
Buy Copper Tube Terminals 10mm online in UK that are RAIL- approved and are suited for use in public transit, rolling stock, and signalling installations. They will make a high tensile crimped joint that complies with BS4G 178 Part 2-1986 and RSE/RTD 024 Part 7 - Issue A (London Underground Approval) E6487 A2. Order the best quality Copper Tube Terminals Online from Kafton UK Cable Ties.
Buy online Copper Tube Terminals 6mm² in UK that are RAIL- approved and are suited for use in public transit, rolling stock, and signalling installations. They will make a high tensile crimped joint that complies with BS4G 178 Part 2-1986 and RSE/RTD 024 Part 7 - Issue A (London Underground Approval) E6487 A2. Order the best quality Copper Tube Terminals Online from Kafton UK Cable Ties.
Copper Tube Terminal Crimping Tool for cable lug and non-insulated terminals. Hand-held crimp tool with high precision and a ratchet mechanism for a fully controlled pressing cycle. BSEN61238-1:2003 compression ratio standards are met. Buy online Copper Tube Crimper Range: 1.5mm�²-16mm�² that Suitable for use with copper tube terminals with seam. Order best Crimping Tools Online from Kafton UK.
Buy Copper Tube Terminals 10mm online in that are RAIL- approved and are suited for use in public transit, rolling stock, and signalling installations. They will make a high tensile crimped joint that complies with BS4G 178 Part 2-1986 and RSE/RTD 024 Part 7 - Issue A (London Underground Approval) E6487 A2. Order the best quality Copper Tube Terminals Online
We has specialized in manufacturing steel tubes for automobiles and appliances for over 20 years. A tremendous commitment to research and development has been made in order to produce better tubes. These tubes are an essential component for ensuring the safety and performance of automobiles and appliances. Related Certified Spec. YB/T4164-2007: Chinese Standards SAE J527: Society of Automotive Engineers ASTM-A254 : American Society for Testing Materials MS191-21 : HYUNDAI & KIA Motors Standards JASO M 101 : Japanese Automotive Standards copper plating of inner and outer walls, maintaining cleanliness and gloss Maintaining pressure resistance with Max. 1200kg/cm2 Durability with air-tightness against vibration and impact Tensile Strength: 290MPa Yield Strength: 200MPa Elongation: 40% Flaring TestFlaring: 25%
JGX - Gold Copper Tube and Film Metallized Polypropylene Capacitors - Axial Specifications Passive flammability GB/T 14004-92 IEC384-6 JGX - Gold Copper Tube and Film Metallized Polypropylene Capacitors Axial Operating temperature -40â?? ~ +85â?? Capacitance range 0.047uF ~ 47uF Capacitance tolerance J(�±5%) Rated voltage 250V,630V.DC Withstand voltage 1.4VR 2S Dissipation factor C 0.1uF 0.0015 10KHz 0.1uF C 1uF 0.0025 10KHz C>1uF 0.0010 1KHz Insulate the electric resistance CR 0.3 F, I.R 15,000M CR>0.3 F, I.R 5,000S Leads Diameter 1.0 Tinned Pure Copper Wire
Copper mould tubes for continuous casting machines. Copper mould tubes are used as a cooling spare part for continuous casting machines. 1. Square copper mould tube 2. Rectangular copper mould tube 3. Round copper mould tube 4. Beam blank copper mould tube 5. Non-standard copper mould tube Square Mould 50X50~650X650 Rectangular (100~500)X650 Round mould Ф110-Ф1500 Design with double taper, triple taper Multi-taper, parabolic taper and various kinds of continuous taper Non-standard mould Beam blank mould
Copper mould tubes for CCM Copper mould tubes are used as a cooling spare part for continuous casting machines. 1. Square copper mould tube 2. Rectangular copper mould tube 3. Round copper mould tube 4. Beam blank copper mould tube 5. Non-standard copper mould tube Square Mould 50X50~650X650 Rectangular (100~500)X650 Round mould Ф110-Ф1500 Design with double taper, triple taper Multi-taper, parabolic taper and various kinds of continuous taper Non-standard mould Beam blank mould The materials of copper mould tubes should be the ones with good tensile strength, fatigue strength, proper hardness, low elongation and high heat conductivity coefficient. As a result, material like phosphorous deoxidize copper CU-DHP,CUAG0.1, CR-ZR-CU are widely accepted by users of all countries. Coatings: Copper has lower hardness which leads to lower anti-abrasive property. Therefore, the area at the lower part of the moulds, where the stress increases drastically due to shells, will be more severely worn. To increase the life time of copper moulds, Uniform mould interior surface plating with suitable hardness is needed. We use hard chrome plating to increase the life of mould tubes. The plating thickness will be controlled in the best range. As for the coating of copper mould plates, based on our years of experience, we are able to provide Cr coating, Ni-Cr coating, Ni-Fe coating and Ni-Co-Cr coating to meet the demand of various customers both at home and abroad. Notice: 1. Please use the copper mould tubes within one year. 2. Please store the copper mould tubes in someplace dry and well ventilated. 3. Keep the copper mould tubes away from acidic materials, especially the internal coating surface. 4. Polish the external surface of the copper mould tubes with sand paper if oxidized. 5. Pouring the molten steel to the center of the copper mould tubes 6. Avoid internal surface scratch of the moulds caused by manual operation.
Copper mould tubes for continuous casting machines. Copper mould tubes are used as a cooling spare part for continuous casting machines. 1. Square copper mould tube 2. Rectangular copper mould tube 3. Round copper mould tube 4. Beam blank copper mould tube 5. Non-standard copper mould tube Square Mould 50X50~650X650 Rectangular (100~500)X650 Round mould Ф110-Ф1500 Design with double taper, triple taper Multi-taper, parabolic taper and various kinds of continuous taper Non-standard mould Beam blank mould
East Jin International Co., Ltd manufactures pair coil, also known as insulated copper tube, for various use. It is commonly used for installation and maintenance of centralized air conditioning system which needs UV protection, heat and moisture resistance. Complied standard for inserted copper tube is available for ASTM B280, JIS H3300, KSD 5301 and AS1432.
East Jin International Co.,Ltd manufactures ASTM B819 standard for medical purpose gas tubing system. We provide range of two types of ASTM B819 in Type K & L engineered to meet its specification for the best performance.It is produced and cleaned for its medical use with nitrogen purging with blue rubber inner cap to maintain minimum residue inside the tube.
East Jin International Co.,Ltd manufactures ASTM B306 standard for drainage system. It is applicable to sanitary drainage, waste, vent piping, soil and other non-pressure uses.We provide a range of ASTM B306 from small to large outer diameters, which is engineered to meet its specification for the best performance.
Specifications: Materials: CuDHP, CuAg, CuCrZr, CuNiP Cross section: Square, rectangular, round, polygonal, beam blank Size: up to 750 mm (across), larger sizes available on request Internal profile: Parallel, single CONE-shaped, multi CONE-shaped, parabolic, special paraboic Curving: Straight, curved Radius of the inside corner: > 1mm Length: Unlimited Packaging Details: Standard seaport package&Standard airport package Delivery Detail: According to actual requirement Place of Origin: Liaoning, China (Mainland) Brand Name: LMM Model Number: LMMould-1 Type: Casting Parts, round tube, square-tube, E-type tube, rectangular tube Material: TP2,CuAg0.1,Cu-Cr-Zr Plating: Other Certification: DIN Taper: single taper, double taper, multi-taper, concave type, etc
Standard ASTM, AISI, JIS, ISO, EN, BS, GB, etc. Material T1, T2, T3, C11000, C11100, C11300, C11400, C11500, C1100, TU1, TU2, C10200, C1020, TP1, TP2, C12000,C12200, C14500, C14700, C15000, C1201, C1220, etc. Size Length: as customersâ?? requirement. Size can be customized according to customer needs. Surface Mill,polished,bright,oiled,hair line,brush,mirror,sand blast, or as required. Application It is currently widely used in power transmission, motor manufacturing, and other fields. Shaped copper products are used in a wide range of applications in the industry, and are favored and welcomed by the market
Item C102 Copper Tube Standard : ASTM, AISI, JIS, ISO, EN, BS, GB, etc. Material : T1, T2, T3, C11000, C11100, C11300, C11400, C11500, C1100, TU1, TU2, C10200, C1020, TP1, TP2, C12000,C12200, C14500, C14700, C15000, C1201, C1220, etc. Size Diameter: 6mm-120mm Wall thickness: 0.5mm-3.0mm Length: as customers requirement. Size : can be customized according to customer needs. Surface : Mill, polished, bright, oiled, hair line, brush, mirror, sand blast, or as required. Application : Now generally used as copper tube for electrical appliances, copper tube for refrigeration, high pressure copper tube, corrosion resistant copper tube, copper tube for connection, copper tube for water channel, electric copper tube, industrial copper tube.
Transense Hvac Copper Tubing , C12000 Ac Copper Tube ISO9001 4
Non Alloy Copper Condenser Tube Semi Hard Annealing For Refrigeration 2
EN12735 C11000 99.9% Pure Copper Tube Polished Surface
