Cotton canvas structure of warp and weft are made from cotton fiber textile, low elongation, good mechanical fastening card access, canvas and rubber adhesion is good. Little distortion under high temperature conditions, for shorter distances, transport volume smaller occasions. Polyester cotton conveyor belt is to upgrade product quality, the tensile body with radial fibers and polyester-cotton blend woven weft of cotton fiber, integrated physical and mechanical properties superior to cotton conveyor belt, especially with the body thinner, lighter, impact performance greatly improved, so has better performance and save energy, create better economic benefits for the user. Applicable in the short, medium load conditions, transport materials.
Features: 1 High tensile strength: for single-span, long distance transportation of materials. 2 Use a small stretch: tension required to trip short. 3 Driving rolls of small diameter: with a core layer of longitudinally by a skeleton made of wire rope, resistant to flex fatigue. It can be equipped with a smaller diameter roller, the device compact. 4 Rubber with good adhesion rope: the surface of galvanized steel wire rope, while the use of wire rope has excellent adhesion with the rubber, bonded together with rope, impact resistance, easy off blocks, long service life. 5. Rope tension is even: As advanced manufacturing technology, arranged in uniform rope tension, running balance, easy to deviation. 6 Into the slot performance: with a core of non-horizontal frame, easy to form a deep trough, install more material, and to prevent scattering. 7 Available X-ray examination: the skeleton in the conveyor rope, used X-ray detection, to prevent accidents.
1, long-distance, large capacity, high conveying speed, high power; 2, designed according to existing terrain situation, suitable for rough, mountainous topographic situation; 3, stable and controllable start, continuous and highly efficient operation. Modes of system start and break are adjustable based on the layout of belt conveyor, approaches that minimize dynamic impacts on the belt conveyor and lengthening the service life of conveyor belt; 4, more than 200 belt conveyors are operating worldwide. Maximum horizontal curve angle of 47.7o£¬minimum curve radius 120m£¬and maximum no. Of curves of 10; 5, customers are in the industries of cement, power plants and coal etc; 6, chevron pattern conveyor belt is available for steep angle belt conveyors with vertical curves angles from -23 to 38. Export packing as required.
3 Belt brands: Yongli belt (the most famous brand of China, Ammeraal, Forbo-Siegling Application indent: material handling system, baggage handling system etc. Food, airports, logistics Belt data: - Comply with ISO 340, DIN 22103, NF-T 47108 or equivalent standard - Flame retardent - Top side: PVC or PU - Ambient temperature: -15 to 80C, 5 to 176F. Weigth: 1500mm.
We manufacture upto 2000mm width conveyor belts of any specifications. Any size & length.
With a wide range, to suit almost all the Industries, light duty industrial conveyor belts are manufactured with various base fabrics like polyester, nylon, cotton, solid woven, fibre glass etc. and top surface coating with Rubber/PVC/PU/Silicon. These belts are available in White, Green, Black or any other color according to specific requirement, up to 2400 mm wide. Low operating noise & costs, reduced maintenance, excellent durability. - Largely impervious to oils, greases and many chemicals. - Special types give excellent grip on inclines. - Abrasion resistant - Rugged. - High strength - Low stretch characteristic. - Light & thin, better strength/weight ratio - energy saving. - Superb tracking over great length- longitudinally flexible & laterally stiff. - Antistatic - prevents electrostatic build-ups. - Can be fitted with flights, profiles & sidewalls. - Wide ranges of availability in 1,2,3 ply construction & solid woven. - Simple thermo jointing finger or spliced, and can be done at site even. Application Areas: - Packaging, Pharmaceuticals, automotive industry, sorting & baggage handling, baking, biscuit & tiles making, caning treadmills, fruit & vegetable handling fish processing, glass & insulation.
These belts are manufactured according to the customer specific requirements and usage, the range includes rib, cleats, side wall on top surface of the belt, rough top surface, embossed type surface like waive top and fish top. These belts are manufactured in our own plant situated at Ahmedabad. These belts are designed to provide the major advantages for trouble free service life and have the following advantages like high adhesion, level, higher ply strength and lower self weight, improved utilization, outstanding impact resistance, elimination of edge protection & higher longuidinal flexing. Jagruti endless belt (joint less belt) ‘jagruti’ endless belt without splice joint (joint less belts) are manufactured directly in “sleeve” form as per customer’s requirement. The basic advantage is that, it has no transversal or longitudinal joints. Joint less belts have been highly acclaimed especially when they are used as feed belts on the system such as conveying, gauging, die cutting, dosing and weighing, squaring, stretching bag filling, packaging etc. Joint less belts provides more life then splice joint vulcanized belt. Used for zero spillage, fast and bulk material handling. Suitable for high inclination & magnet separator. Use to carry materials on steeper angle up 90’ with no spillage space requirement is quiet less as compared to conventional belts.
All types conveyor belt, wire mesh.
This machine suitable for transport all kinds of powder granular materials and samll block , such as coal, gravel , lump coal and sand , cement , cereal , etc.Not applicable to transp or perishable , viscous , easy caking materials.
Various conveyor belts. UV Protection+ Iron Reel.
Character: High tensile strength, low elongation values, impact resistance and good troughability. Available for long-distance, large capacity, high-speed transmission of massive, granular and powder materials. 1. More flexible than their equivalent with fabric reinforcement and requiring drums with smaller diameters 2. Using zinc galvanized open steel cord and rubber with property of good adhesion, then the adhesion between steel cord and rubber is tight. And belt is resistant to impact and having longer using life. 3. With advanced manufacturing techniques, steel cords are evenly arranged with the same tension. Therefore, belts can run well and difficult to run away. 4. Limiting of longitudinal cuts and tears with one or two layer of steelcord tensioning according to customers special requirement Application: Steel cord conveyor belts are widely used in distributed occasion, cement, coal mines, quarries, mining, power plants, metallurgy, ports and chemical industry, etc. UV Protection+ Iron Reel.
In some conditions, due to the limit space or in case of lifting materials at a large slope, sidewall conveyor belt is always used to avoid material spilling. This system can convey materials vertically and also can work at a large slope from 0 degree to 90 degree, and allow heavy load material conveying. Carcass: the carcass of the base belt can be CC, NN and EP fabric; clients can choose anyone according to their requirements Character: 1. Low maintenance cost 2. Large transport capacity, and it can avoid material spilling effetely 3. The belt can facilitate switching from horizontal to inclined conveying and from inclined to horizontal conveying 4. It saves a lot space as it allows material conveying at 0¡ã-90. Application: harbor, metallurgy, mining, electricity, coal, foundries, construction, food, cement works, fertilizer, etc. UV Protection+Iron Reel
We manufacture various Steel Cord Conveyor Belts with strength from ST630 to ST7500 and width range from 300mm to 2200mm according to special requirement from customers. Standard: DIN, AS, ISO, BS, JIS, SABS and RMA, etc. Character: High working tensions, low elongation, great conveying capacity, steady running, convenient maintenance, high bucket attachment values, suitable for conveying bulk material. Application: Bucket Elevator conveyor belts are the best solution from the technical and cost-efficiency point of view. They are suitable for conveying material vertically and widely used in building, mining, power station, cement, concrete plants, chemical industry, light industry and grain, etc. UV Protection + Iron Reel
Specification: Open V, Closed-V, L type, H type, Y type, A type and F type, etc. And new patterns can be developed for customers accordingly. Character: 1. Can carry bulk material at angles of 17~ 18 and bagged material at angles of 30~ 50. 2. Cleat angle and pitch are designed for smooth travel over return idlers 3. Cleats and top cover rubber are mono block molding for strength. Application: Chevron conveyor belts are used to convey wet and/or loose materials or bags up steep inclines. The patterns prevent or reduce slide back and increase the amount of product moved by quick pick-up at the point of loading. They are used in quarries, sandpits, cement works, lime works, mobile crushers and screens, farming and salt mines, etc. UV Protection+Iron Reel.
Fabric specs: EP-80~EP-630Belt width(mm): 300~2600Polyester conveyor belts also called EP conveyor belts, whose tensiion resistant body is canvas woven by polyester in warp and polyamine in weft. The belts have the characteristics of low elongation in warp and good troughability in weft, good water resistance, good wet strength, no mould it is suitable for medium, long distance and heavy-load transportation of materials.
Belt strength(ST_NO. ): ST_630~ST_5400Belt width(mm): 600~26001. UsageSteel cord conveyor belts are widely used in high strength, long distance and heavy load than sportation of materials, and they are also used in high strength and distance transportation of materials on special occasions.2. Characteristic(1)High tensile strength: The belts are suitable for large span, long distance transportation of materials.(2)Small elongation in use: The belts need only a very short take-up stroke distance.(3)Small diameter of drive pulley: The bell body has a layer of longitudinally arranged steel cords as its skeleton, and thus is flexble and fatigue - resistant. Therefore, drive pulley of smaller diameter can be used to make the equipment smaller.(4)High adhension between rubber and steel cord: The steel cords are coated with zinc on their surface, and also the rubber has the property of good adhesion with steel cords. Therefoe the rubber is tightly adhered to the steel cords that is shock resistant and hard to peel off, which make the belt long life.(5)Even tension of steel cords: Out of our advanced techniques in manufacturing, the steel cords are very equably arranged and have the same tension, so the velts are well balanced in tunning and diffcult to run away.(6)Good troughability: As the belt body has no transverse skeleton, it is easy to form a deep trough, so the belts can load more materials and prevent the materials from eacaping.(7)Inspection of the belt with X-rays: Users can use X-rays to inspect damages of the skeleton, the steel Exporting package
Fabric specs: NN-80 ~ NN-630Belt width(mm): 300~2600Nylon is one of the best quality synthetic fibers that the rubber industry use nowdays. The nylon canvas is woven by nylon fibers both in warp and in weft, it is most widely used fabric in rubber industry, and its outstanding merits are high abrasion resistance, high tensile strength and good fatigue.
It works to carry speedy of box, package, jug bag and like this loose or in packs. It can use fixed height or adjustable units. It can be speed adjustable according to customer need. The belt selection is made according to type of product which will carry. It can select pvc, rubber and wire belt types. We can produce speacial manufacturing for desired sizes. Standart Wides A) 300 mm B) 450 mm C) 600 mm D) 800 mm Standard length : 1000-6000 mm Special length : 6000- 60000 mm
It is assumed pick-up will be performed with: - Transported material: powder or fluent plastic granules; - Apparent specific weight 0.7 kg/dm³; - Initial pick-up length having inclination α = 0° and α = 30°; - Rotary spiral with 580 rpm (930 rpm applications are also possible). Load capacity from 120 kg/h-10,000 kg/h.
Materials: stainless steel wire, steel wire, galvanized iron wire, polyester fiber, etc. Weaving and characteristics: conveyor belt can be made into different types, including chain link type belt mesh, balanced weave, reinforced and other types offering different mesh opening and features. Uses: conveyor belt mesh is used widely in heat condition, food processing, pharmacy, glass printing and some special equipments. 1 belt per pack or carton.
