Find Verified Converters Switches Suppliers, Manufacturers and Wholesalers

1×N Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.

IR Sensor Switch
 
FEATURES
1. Detection range: 5-10cm is recommended
2. Intertek CE approved
3. Voltage: 100-240V
4. Power: Max.250W

Model:

TST-UK-T1 series

Wiring:

Double wiring system: Null line+ Live line

Power supply:

AC 100-250V; 50hz-60hz

Size:

86*86*36mm

Material:

Senior tempered glass panel +flame retardant ABS shell base

Color:

Ivory white/ Black pearl/ Champagne Gold

Type:

a) 1 gang, 2 gang, 3 gang, 4 gang ;
b) 1 way or 2way
c) RF Remote control/Manual control/Smart phone remote control

Power Load:

1-1000W/gang, total: 2000W

Max current:

10A

Static power:

<0.2mW

Life cycle:

100,000 times

Working temperature:

-30~70¡ãC

Working humidity:

10%-95%

Warranty:

2 years





Packing detail:
Box Package Size: 110mm x 90mm x 50mm 0.25kg/box
Carton package size: 56*24*29cm, 50pcs/14kg

E-link LNK-FS800M is a nine ports managed 100M all optic fiber switch. It offers eight SFP fiber ports access and one Gigabit Combo port (1000M SFP port and 10/100/1000M adaptive RJ45 Ethernet interchange) uplink.
 
LNK-FS800 supports SFP modules hot plug, and supports to work with fiber switches, fiber converters and other devices witch fiber ports. It supports WEB management as a managed switch; It applies to security system, electric system, traffic system requirements.
Parameter Specification
Standard IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-SX/LX Gigabit Ethernet, IEEE802.1d Spanning Tree
Wavelength 850nm/1310nm/1550nm
Distance 100M SFP: Depending on SFP Module
Cat5:100m
Port 8 SFP fiber ports: 100Mbps
1 Gigabit Combo port:1 Gbps, 1000M SFP&10/100/1000M RJ45
MAC 8K
Buffer memory space 1Mbit
Bit error rate <1/1000000000
MTB 100000 hours
Power DC12V/2A
Power consumption 10W


Standard Packaging: Carton packaging(Support customer Logo)

LNK-1400P-SFP Series 10/100Mbps copper to fiber switch provides IEEE 802.3af/at Power Sourcing Ethernet (PSE) functionality on the 4 twisted pair ports, supplying both data and electric current to devices such as WiFi access points, VoIP phones and IP security cameras.

It is an ideal solution when PoE-powered network devices need to be installed further than the 100 m / 300 ft. LNK-1400P-SFP supports 100M Ethernet Port and 100M SFP Port. The Ethernet port supports both half-duplex and full-duplex mode. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed.


Standard Packaging: Carton packaging(Support customer Logo)

LNK-IMC1100-SFP is a microtype media converter that supports external SFP modules and meets EN55022. It is an industrial product whose operating temperature range is -40℃ to 80℃. LNK-IMC1100-SFP supports 100M Ethernet port and 100M SFP port. The Ethernet port supports both half-duplex and full-duplex mode. LNK-IMC1100-SFP is the same at the transmitter or receiver sides. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed.
This Sleek Microtype design media converter occupies limited space and it's an ideal solution for easy installation within most camera housings.
Ethernet
Standards: IEEE802.3u 100Base-TX/FX
IEEE802.3x Flow Control
Processing Type: Forward
Half-duplex, Full-duplex
Forward Filter Rate:: 148,800pps (100Mbps)
Cabling: 100Base-TX: Cat5 or above
Maximum Distance: Cat5 UTP up to 100m
Connector: 1x RJ45
Optical Port: 1 x SFP 100Base-FX
Environmental
Operating Temperature: -40°C to 80°C (-40°F to 176°F)
Storage Temperature: -40°C to 85°C (-40°F to 185°F)
Relative Humidity: 5% to 95% non-condensing
MTBF: > 300,000 hrs
Electrical and Mechanical
Input Power: 12VDC (Terminal Block)
Power Consumption: 2.4W Max. 0.2A@12VDC
LED Indicators
Power: Power Status
100TX: Link/Activity, Speed
SFP: Link/Activity
Dimensions (WxDxH): 36.2 x 117 x 24.5 mm
Weight: 0.15Kg
Casing: Aluminum Case
Mounting Options: Wall-mount / LNK-MR-C10 1U Rack
Regulatory Approvals
ISO9001, CE, FCC, RoHS
FCC part 15,Class A
EN55022:2006+A1: 2007 Class A
Surge Protection:
RJ45: 1KV
Power: 500V
ESD: 4KV/8KV


Standard Packaging: Carton packaging(Support customer Logo)