These Polarization Maintaining Filter Couplers offer low insertion loss, high extinction ratio and excellent enviromental stability. Accurate coupling ratios are available with good uniformity in a wide wavelength range. It could be used to perform power splitting and mornitoring functions in CATV Systems, Fiberoptic Sensors, Local Area Network, and other kinds of optical communication systems.
Polarization maintaining optical circulators for fiber optic applications. A first embodiment uses birefringent wedges and Faraday rotators in an inline configuration. The second embodiment utilizes a polarizing beam splitting cube and
This product is used to manually adjust the attenuation of laser power, so as to adjust power in a fiber optic system, and to evaluate the dynamic range of a fiber optic systems. A manual rotation knob can be used to adjust the attenuation of laser power. Multiple wavelengths (630-1550 nm) are available.
Polarization-maintaining optical wavelength division multiplexer is an optical fiber wavelength division multiplexer made of polarization-maintaining optical fibers.It is Widely used in optical communication networks, optical EDFA, sensing systems and other optical communications.
Optomax Digital Series Liquid Level Switches General Description Optomax Digital liquid level switches are ideal for applications with restricted space that require a miniature, low power and low cost sensing solution. The microcontroller based sensor is solid state, incorporating an infra-red LED and phototransistor which are optically coupled by the tip when the sensor is in air. When the sensing tip is immersed in liquid, the infra-red light escapes making the output change state. The sensor can detect the presence or absence of almost any liquid type; oil or water based. It is insensitive to ambient light and is not affected by foam when in air or by small bubbles when in liquid. The TTL compatible push-pull output can sink and source up to 100mA at a supply voltage range of 4.5 to 15.4Vdc and can be configured to output a high or low signal when in either a wet or dry state. A fail-safe PWM option is also available with a supply voltage range of 4.5 to 5.5Vdc. With housing options for internal or external sensor mounting and for use in two operating temperature ranges; Standard (-25 to 80'C) or Extended (-40 to 125'C). Available in two chemically resistant housing materials, Polysulfone, the standard choice for most applications or Trogamid, which is typically used in food and beverage applications. Optomax Digital Series Liquid Level Switches Features * Liquid level switches that can detect almost any liquid type; oil or water based * Choice of material; Polysulfone (standard) or Trogamid® * Choice of threads and terminal connections Optomax Digital Series Liquid Level Switches Benefits * Low power * Low cost * Compact design LLT600D3SH Optomax Digital Series Liquid Level Switches Technical Specifications * Supply voltage: 4.5V DC to 15.4V DC * Supply current: 2.5mA max. (Vs = 15.4V DC) * Output sink and source current: 100mA * Operating temperatures: -25'C to +80'Câ?? * Storage temperatures: -30'C to +85'C * Housing material: Trogamid® * Housing Type: 1/2" SAE
CISCO GLC-SX-MMD clear stock New original 3years warranty
CISCO GLC-SX-MMD clear stock New original 3years warranty
NEW ORIGINAL SFP-10G-LR Have 50pcs need to clear it Only for $249 each now
CISCO USED GRADE A CONDITION QSFP-4X10G-AOC1M cable , $50 each Original , 3years warranty . TRADE CISCO EQUIPMENTS CISCO Modules (GLC,SFP,SFP+,XFP,ONS,X2,XENPAX series etc ) CISCO Cables (QSFP 4X10G , H40G ,SFP-10G ,SFP H10GB etc) CISCO Switches(2960X,2690S,3750X, 3750, 3850X series etc) CISCO Router Card (HWIC,VWIC3 ,C3KX ,C3850 series etc ) CISCO Memory (PVDM3-16/32/64/128 etc )
CISCO GLC-SX-MM NEW GENUINE Have 500+ in stock for sale Warranty 365days
CISCO SFP-10G-SR Used, genuine , grade a condition Have 300+ in stock for sale Warranty 365days full tested .
Cisco SFP-10G-LR GENUINE SFP+ Module 10GBASE-LR Transceiver SMF Singlemode
. Introduction TYPE-C TO VGA+USB3.0+PD multi-function converter.VGA port can connect with projector/display/TV and other big screen display, support 1920*1080P output. USB3.0port can connect with U disk/ mouse/ keyboard/ mobile hard disk/ blue-tooth and other USB port devices. TYPE-C PD charging function, supply 60w charging power for Pad/laptop with TYPE-C port, while they are reading data/ output video. Let you be good at playing expansion application of devices, no worry about electricity consumption of computer office or recreation. . Parameters 1.Adopts VL100 high performance and low power consumption digital conversion chip, stable VGA signal transmission. 2.Aluminum-magnesium alloy shell, CNC treatment technology, simple and durable. 3.TYPE-C port supports positive and negative insert. 4.Provide function expansion application for laptop with TYPE-C port, at the same time TYPE-C PD can supply 60w charging power. 5.USB3.0 port transmission speed is as high as 5Gbps 6.VGA high definition audio and video output, support 1920*1080P high definition image quality, support screen expansion, extension and mirror image mode. 7. Electrostatic discharge voltage protection: ±8KV 8. Working temperature 40-50 (ambient temperature 20) 9. Electrical specification Rated input voltage: DC 5V\12V\20V Input current: 2A\1.5A\3A 10. Product specification: 80mm*51.4mm*14mm Net weight:65g
1. Compatible with rs232, rs485 tia/eia standard 2. Automatically send/receive data, without external traffic control signals 3. Communication rate: 300-38400bps 4. Communication distance: 1.2km(9600bps) 5. Can connect 32pcs rs232 or rs485 devices.
Our featured products automatic transfer switch, circuit breaker, contactor, pilot light,relay, SPD, etc. with solid quality and considerable price and could equip them with enclosure. 125A-1600A Manual Changeover Switch 1.RDGLZ-125-3150A is applied to changeover two groups of low voltage electric circuit or two groups of load devices or safety isolation. 2.Mode of operation: Direct operation:handle is installed on the switch Operation outside:handle is installed outside the door of power distribution board. 3.The product with observation window can be provided according to the demand to observe directly the on and off state of contact. 4.It have three poles and four poles (three poles + on and off neutral pole) 5.Two groups of auxiliary contacts can be assembled. 6.Extended shaft is used for the operation outside the board. 7.Mechanical performance and electrical performance are correspond to RDGL-125A-3150A property 8.The bridge connecting conductor can provided to connect the inlet or outlet terminals of the switch. Note:The bridge connection is chosen,and it need to indicate the inlet or outlet connection with it.
Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. Product NameRDS3 Series Dual Power Automatic Transfer Switch TypePC Type Material Of CoverPC StandardGB/T14048.11 Poles3P/4P Current16A-630A Controller TypeA: Basic type single phase monitor B:Standard type three phase monitor + fire-fighting,generator control C: Intelligent type three phase monitor+fire-fight, generator control+LCD display Use CategoryAC-33B TypeRDS3-125RDS3-250RDS3-630 Rated Working current (A) le16A-125A140A-250A315A-630A Rated Working voltage (V) Ue400400400 Rated Insulation voltage (V) Ui800800800 Rated short time withstand current (KA,rms) Icw10KA (200MS)10KA (200MS)25KA (200MS) Rated short circuit making capacity (KA,peak) Icm20KA30KA50KA Rated control power supply voltage (V) Us230V/50HZ230V/50HZ230V/50HZ Contact transfer time (s)1.51.82 About ATS NEW FEATURES ARRIVAL: 1, RS485 communication function available with RDS3 type. 2, Generator exerciser timer (Engine exerciser) is available, user can set the generator start daily, weekly or monthly. You can also choose the generator exerciser load mode, to test the generator on load or off-load. It is applied to the place where generator is not frequently used. 3, Under manual mode, by press "+" button to start or stop the generator manually. 4, High and low Frequency (Hz) protection. 5, ATS setting menu with password protected. RDS3 Series PC class dual power Auto transfer switch, mainly used in two way power supply system with rated voltage below 400V, AC 50/60Hz, rated current up to 630A, when one power supply abnormal, then it transfer between two power supply system, to ensure the power supply reliablity and safety. The ATS have " Main Power", "Backup Power" and "Two way OFF" positions, with higher breaking and making capacity, it not only can meet normal load transfer, but also can meet high inductive impedance or big motor load transfer, meanwhile due to have high short time withstand current capacity, no need special SPCD, doesn't affect the selective of inside circuit, meanwhile it also can meet the application at big capacity power supply side. Product confirm to GB/T14048.11 Standard RDS3 Advantages: a. Control power voltage
Load Change Over Switch ATS Power Switch for Generators Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. RDS2 series Auto changeover switch mainly used for distribution or electromotor network under 50Hz, rated voltage 380V, rated DC voltage 220V, and rated current 16A to 3200A, change over between main power and backup power, mutual work as backup power system and city power and Generator power. At the same time, it can act as disconnector for the un-frequency ON and OFF circuit or lines. Such product are widely used in the power transmission and distribution system and atomization system of important site which power off is not allowed, such as fire-fighting, hospital, bank, high buildings etc. RDS2 Auto Transfer Switch Equipment (ATSE), is integrate the switch and logical control together, no need extra controller, is an electromechanical integration auto transfer switch, with voltage monitoring, frequency monitoring, communication port, electrical and mechanical interlock functions etc., can achieve auto control, remote motor control and emergency manual control. Operation is achieve by logical control board with various logical commands to managing the motor, gear-box running, motor with spring energy storage, instant release accelerating mechanism, quickly open and close the circuit or make quick transferring, through visible status to make sure the safety isolation, greatly improved the every electrical and mechanical performance. RDS2 ATS integral designed with metal case, compact and strong. RDS2 ATS, the control part is with metal cover, switch part with DMC case, have strong dielectric performance, protection performance and reliable operation safety. The switch suitable for auto transfer between main power and backup power system or two load equipment's auto transfer and safe isolation etc. The switch has beautiful appearance, novelty, small size, complete functions, is the best choose among the similar products. RDS2 series product have passed the EMC test.
63A Solar Panel Load Auto Changeover Switch ATS RDQ3NX-A/B/C/D series ATS is our company introduced to the market on 2009, effectively solved the problems of MCB type ATS 's insufficient functions, poor reliability, un-convenient replacement etc., this product have three patent certificates ( Invention patent, Utility models patent, Appearance patent), C/D series is a new type introduced to market on 2010, this product have complete functions, concept innovation, is a unique product among the similar products. Product Structure RDQ3-63-A/B/C/D series ATS comprised with two MCB and accessories, mechanical interlock system, intelligent controller etc. Product have A, B,C,D four type control construction, A type is basic type ( Only provide with auto change auto recovery, phase missing protect, auto/manual control), B type is intelligent type( including the A type functions and have Generator start, fire linkage, time delay functions), C and D type is improved type, increased three phase voltage monitoring function on A and B type. This ATS series circuit breaker keeps the original breaker's overload and short circuit protection function. RDQ3NX Series Advantages: 1. Product with modularized design, executive unit, transmission mechanism, control circuit completely independent, easy for replacement. 2. Mechanical transmission device adopt gear transmission, completely eliminate the possibility of closing at same time; 3. Compact appearance, it is one of the smallest product on the market; 4. The control circuit layout adopt working power and sampling power separate with single chip control, to overcome the electromagnetic interference from the hardware construction; 5. Working power voltage range: AC200-400V; 6. Less power consumption, max. peak power loss 4.8W, only 20% of other similar products; 7. Product have complete functions, with generator start, fire linkage, ON delay functions etc.; 8. Modularized design, good components interchange performance, easy installation; 9. Can use various executive circuit breaker;
63A Solar Panel Load Auto Changeover Switch ATS RDQ3NX-A/B/C/D series ATS is our company introduced to the market on 2009, effectively solved the problems of MCB type ATS 's insufficient functions, poor reliability, un-convenient replacement etc., this product have three patent certificates ( Invention patent, Utility models patent, Appearance patent), C/D series is a new type introduced to market on 2010, this product have complete functions, concept innovation, is a unique product among the similar products. Product Structure RDQ3-63-A/B/C/D series ATS comprised with two MCB and accessories, mechanical interlock system, intelligent controller etc. Product have A, B,C,D four type control construction, A type is basic type ( Only provide with auto change auto recovery, phase missing protect, auto/manual control), B type is intelligent type( including the A type functions and have Generator start, fire linkage, time delay functions), C and D type is improved type, increased three phase voltage monitoring function on A and B type. This ATS series circuit breaker keeps the original breaker's overload and short circuit protection function. RDQ3NX Series Advantages: 1. Product with modularized design, executive unit, transmission mechanism, control circuit completely independent, easy for replacement. 2. Mechanical transmission device adopt gear transmission, completely eliminate the possibility of closing at same time; 3. Compact appearance, it is one of the smallest product on the market; 4. The control circuit layout adopt working power and sampling power separate with single chip control, to overcome the electromagnetic interference from the hardware construction; 5. Working power voltage range: AC200-400V; 6. Less power consumption, max. peak power loss 4.8W, only 20% of other similar products; 7. Product have complete functions, with generator start, fire linkage, ON delay functions etc.; 8. Modularized design, good components interchange performance, easy installation; 9. Can use various executive circuit breaker;
Radin Electric  provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. Technical Specification Model RDQ3-63 Working Voltage AC150-265V  50/60Hz Operation Mode Auto and Manual Transfer Mode Auto Transfer with Auto Recovery Transfer time delay 0.2s Fixed / 0~30s adjustable Rated Current 6A to 63A  3P and 4P About ATS RDQ3-63 is CB type dual power transfer switch,mainly apply to the two power systems with neutral line earthed and rated current below 63A, rated voltage 230V,50/60Hz, transfer between two power source when one power source fault,to ensure the power supply reliable and safety. Product Structure RDQ3-63 Series ATS usage category AC-33IB,electrical appliance grade CB class,its structure comprise with two MCB and accessories,mechanical interlock transmission mechanism,automatic controller,motor operation mechanism etc.Meanwhile the MCB inside the ATS have its original over load and short circuit protection function,can also used as ON/OFF and protection of the main circuit. Delivery Terms Shipment & Express & Air express
