Our products are as follows: T/s: 1670 /1770 / 1860 / 2000 mpa Structure£º1x7, Standard: astm a416, bs5896, gb/t5224, jis g3536, as/nzs 4672 Nominal dia.: 9.53/9.5, 12.7, 15.2, 15.24, 15.7, 17.8, 18.9, 21.6mm Type: plain, spiral ribs, pe coated (unbonded), epoxy resin coated. Packing: shaftless and moisture-proof. Each coil is strapped by steel bands with two wooden pallet on the bottom (fuming /steaming) and fully wrapped in anti-rust paper&P.P woven sheet .
Our products are as follows: T/S: 1670 /1770 / 1860 / 2000 Mpa Structure£º1x7, Standard: ASTM A416, BS5896, GB/T5224,JIS G3536, AS/NZS 4672 Nominal Dia.: 9.53/9.5, 12.7, 15.2, 15.24, 15.7, 17.8, 18.9, 21.6mm Type: Plain, Spiral Ribs, PE Coated (unbonded), Epoxy Resin Coated. Packing: Shaftless and Moisture-proof. Each coil is strapped by steel bands with two wooden pallet on the bottom (fuming /steaming) and fully wrapped in anti-rust paper&p.p woven sheet .
Standard plaster board Moisture resistant plaster board Water proof plaster board Fire proof plaster board Any size we can do as customers request. By paller , 2pcs/package 2400x1200x13mm/15mm 2700x1200x13mm/15mm 3000x1200x13mm/15mm 3600x1200x13mm/15mm
Gypsum/ water ratio: 10 kg of gypsum for 6-7 lt of water Work 90 dak. Fýnal setting time: 150 dak. Standard: TS EN 13279–1 The specification defined above may vary depending on site conditions and base characteristics. 25 kg. Or 30 kg.
High alumina brick Al2o3>80% Bulk density>2.67g/cm3 Cold crushing strength>70mpa Common shaped and irregular shaped. Wooden pallets
Magnesia brick is a kind of alkalescency refractory brick that made from the sintered magnesium with its content of 87% and that are combined with silicate. Since its combination composition is mainly cms-m2s system, its load softening temperature is low and thermal shock resistance is poor that determine its application is few. But magnesia brick is widely sued in the furnaces and kilns that have alkaline atmosphere. The essential properties of magnesia brick depends on the nature of the raw materials, the mineral composition, microstructure and closely on the density of the products. In fumigated wooden pallet
High alumina low cement castable Corundum castable refractory Corundum refractory castable Refractory castable manufacturer Corundum castable refractory Corundum refractory castable Refractory castable manufacturer Al2o3: 90% Max service temperature c: 1750 Refractory castable: it is our bestseller. We can supply many kinds of refractory castable, such as low cement castable, self flowing castable, high alumina castable, mullite castable, azs castable, fireclay castable, light weight refractory castable, corundum castable refractory etc. The refractory castable is unshaped refractory material that doesn't need firing and features fluidness after adding water. Mixed by grain, fines, and binder in fixed proportion, refractory castable can replace special shaped refractory material. Refractory castable can be used directly without firing, easy to construct, and has a high utilization rate and high cold crushing strength. The refractory castable is primarily used fro furnaces and kilns in metallurgy, petroleum, chemical industry, construction, electric power and building etc. In plastic sheets and then in woven bags, last in wooden pallet
1.Low thermal conductivity, 2.Good thermal insulation performance. 3.Good integrity with furnace lining Tyical features: High compressive strength in normal temperature, high ability for anti-abrasion during work, low shrinkage degree under high temperature so as to maintaining an integrity of the furnace lining; low apparent porosity, and fe2o3 content to reduce the carbon deposit in the blowhole and avoid the bricks broken in case of expansion; seldom melting point settings shape. Fireclay bricks are divided into different kinds which are mainly as below: (1) normal purpose fireclay bricks (2) fireclay bricks for coke oven (3) fireclay bricks for blast furnace (4) fireclay bricks for hot-blast stove (5) glass furnace bottom fireclay blocks (6) lower porosity fireclay bricks. In plastic sheets or in wooden pallets
Self flowing castable. Self flowing to narrow place. Easy for installation. Al2o3:40%~80%. Iso9001:2000 certificate. Self flowing---great advantage in installation. These self-flowing or pumpable castables may be transported to high elevations. This self-flowing property of a castable is indeed an installation advantage and many manufacturers are adopting their castable product line to be self-flowing. In woven bags and in fumigated wooden pallets
1) two sides: color steel sheet, stainless steel sheet and hot-galvanized steel sheet for customers' option 2) thickness(mm): 0.3-1.0mm 3) color: according to customer requirement, default is milk white. 4) width: 950mm, 1150mm 5) length:according to customer requirement, the max length is 10, 000mm considering transport. 6) finish: galvanized, powder-coated with pe/hdp/pudf, stainless steel with brushed/mirrored 2.Sandwich layer: polyurethane(pu) Density: 38-40(kg/m3), 40-42(kg/m3), 42-45(kg/m3). Thickness(mm): 50, 75, 100, 120, 150, 200. 3.Fireproof:according to customer requirement 4. Fireproof rating: grade b 5. Advantages: advantages: low price, light and durable, easy install, heat insulation, waterproof, used widely. 1) two sides: color steel sheet, stainless steel sheet and hot-galvanized steel sheet for customers' option 2)thickness: 50mm-200mm 3)width: 950mm/1150mm 4) steel thickness: 0.25mm-0.80mm 5) color: as request 6) finish: galvanized, powder-coated with pe/hdp/pudf, stainless steel with brushed/mirrored.
1) two sides: color steel sheet, stainless steel sheet and hot-galvanized steel sheet for customers' option 2) thickness(mm): 0.3-1.0mm 3) color: according to customer requirement, default is milk white. 4) width: 950mm, 1150mm 5) length:according to customer requirement, the max length is 10, 000mm considering transport. 6) finish: galvanized, powder-coated with pe/hdp/pudf, stainless steel with brushed/mirrored. Density: 38-40(kg/m3), 40-42(kg/m3), 42-45(kg/m3). Thickness(mm): 50, 75, 100, 120, 150, 200.
This is special, patented, technology that incorporates LEDs, light sources or Electronics materials into glass panels to create distinctive patterns, images and logos. It performs as an excellent promotional tool in creating attention-getting displays. High performing bright LEDs conserve energy while being very visible. Polymagic+ is available in special flat or curved glass with LEDs to match your applications without any disturbing wires.
This is a new-patented technology that creates unique glass panels embedded with holographic patterns. It provides a variety of colorful, attractive, eye-catching patterns (stock patterns or custom patterns available). Applications: outer windows, conference rooms, kitchens, shop windows, reception areas, newborn nurseries, room dividers, display areas, museums, and commercial shops.
Polyflush glass appears in different colors when viewing in various angles. It has no metal containment, no oxidation problem and provides up to 99% uv protection. This is an attractive eye-catching material with a unique presentation that will enhance your most imaginative product displays. Applications: counter, sign, lighting, furniture, fatade, shop window, display area.
Polynano carbon nanotube field emission device (cnt-fed) features perfect flat outer screen surface, flat rear screen, very thin thickness, high beam current output of carbon nanotube emission cathode, circle phosphor dot screen anode, monochrome output, see-through type , wide-environmental operation application. Monochrome display and image interface application.
It is a unique product that combining low-e film with glass. It becomes a new trend for curtain walls. By its advanced technology, brings you the benefits of energy saving and high protection against bursting and explosion. It also blocks damaging uv light as well as uncomfortable solar heat. For the better result, it could be laminate or insulate with multiple layers of glass. Advantage: energy saving, blocks up to 99% of uv light, maximize comfort by blocking unwanted solar heat, high durability and stability, blocks electromagnetic waves from electronic products, brings an aesthetic look to buildings by its natural color.
The FOAMCEM light weight cellular concrete is obtained mixing liquid cement grout, or sandcement grout, with the foam made from our foaming agent foamcem.By this system a structure of closed air bubbles is formed into the mix and this fact takes an high insulating power and lightness to the material.Foamcem technology allows, varying the foam-cement-sand ratio, to obtain light weight cellular concrete with a density from 300 to 1.600 kg/m3 according to requirements. Packaging: metal drums 230 kg net weight. Consumption: kg 1, 5-2 cubic meter of cellular concrete depending on the density produced.
It used in the door and working as a pull & knocking device. Size is 8".
High quality P.O.P. 50 kg pack.
The glass wool product is placed in the glass of the meltdown appearance proceed the fiber turn and spray the resin of solid that draw the hot silk wadding form material, then turn through hot solid the deep processing handles and can also make into the series and various products. It is the most superior heat preservation material current generally accepted by people. This kind of material which can be make into board, tube, blanket , is widely used for insulation and heat preservation of building, chemistry, electric power, metallurgy...etc, insulation for civil and industrial heat supply, thermal insulation for tube of air condition and refrigerator, thermal insulation of ventilation, and heat or cold preservation for air condition room; It also can be used for insulation for tube and equipment of boat and petroleum platform. Glass wool board (1) Weight : 24-80kg/m3 (2) Specification : 1200mm,2000mm 1200mm,600mm (3) Thickness : 20mm-80mm
