3r modular expansion and seismic joints ranging from 50mm wide to 500mm wide as per the project loading and structural movement requirement to accomodate movement in the structure and maintain the architectural aesthetic finish in any civil engineering structure.Floor to floor , floor to wall , wall to wall internal /external terrace joints
As per astm and t6 / t5 6063 standards, and load rating of din1055 and 1072
100% Virgin or Recycled Plastic Slat for Goetry Farm.
Size Can be any size but ready to ship available size of 500x600mm and 500x500 mm
Colors will be any color, ready to ship color is Dark Blue.
Self adhesive bitumen flashing tape is a self-adhesive, aluminum /hdpe film surfaced bitumen backed sealing strip. It is a quick, efficient and cost effective method of flashing, sealing and repair that produces a lasting protection in all climates.
Self adhesive bitumen flashing tape is a self-adhesive, aluminum surfaced bitumen backed sealing strip. It is a quick, efficient and cost effective method of flashing, sealing and repair that produces a lasting protection in all climates.
It is recommended for all substrate sealing repairs on asphalt, bituminous sheets, glass, metal, plastics, timber, mortar, concrete, bricks, roof tiles, stone. Seal guttering, downpipes, roof sheets or flashings. Seal cracked brickwork, concrete, titles or glass. Seal carport or verandah roof to main wall. Seal window frames, chimney, etc
Technical information
An aluminum foil/ hdpe film carrier
A self adhesive rubber modified compound and
A silicone coated release interleave( removed during application)
Thickness: 1.0mm, 1.2mm, 1.5mm
Available in rolls:
50mm x3m, 75mm x 3m, 50mm x 10m, 100mm x 10m, 150mmx10m, 225mm x 10m
Special sizes made to order
Malthoid is a 2 ply felt material impregnated with bitumen which is also covered in a fine sand to prevent sticking when rolled. Malthoid is used for waterproofing of flat roofs and under corrugated iron water tanks, to prevent condensation corrosion.
Usage:
For prevention of rising moisture up through walls of brickwork etc.,
90mm x 20mm roll
110mm x 20m roll
150mm x 20m roll
230mm x 20m roll
300 mm x 20m roll
1m x 20m roll
1m x 10m roll
Special sizes made to order
147597 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
A damp proof course ( dpc ) is a physical barrier inserted into the fabric of a building to stop water passing from one place to another. This can be on a horizontal plane, stopping water rising up from the ground by being sucked up by the dry masonry above, or vertically to stop water passing from the outside of a building, though the masonry, to the inside. Dpc's have taken many forms through the ages and one of the earliest forms was to use a layer of slate in the construction. Slate is still used but the less expensive plastic version ( below right ) is now more widely used.
Technical specification of dpc
Water vapour permeability
0.28 gm2 day-1
Bs3177
Water vapour transmission
733 mnsg-1
Water absorption
0.22%
Bs2782 : 430a
Resistance to leakage at joints
Pass
Moat 27 : 5.2.1
Tensile strength of joint
Unaged : 300 n
Heat aged : 290 n
Water soak : 257 n
Moat 27 : 5.2.2/3/4
Cold flex temperature
−60¡ãc
Bs2782 : 320a
Tensile strength
L : 12.9 nmm-2
T : 11.2 nmm-2
Bs2782 : 320a
Elongation at break
L : 415%
T : 582%
Bs2782 : 320a
Tear strength
L : 122 nmm-1
T : 96 nmm-1
Bba method
Low temperature flexibility
L : <−25
T : <−25
Moat 27 : 5.4.2
Dimensional stability
L : −2.0%
T : −0.3%
Moat 27 : 5.1.6
Mortar adhesion test
Pass
Cream method
Size available
110mm x 30 m/50m
150mm x 30 m/50m
230mm x 30 m/50m
300mm x 30 m/50m
380mm x 30 m/50m
450mm x 30 m/50m
600mm x 30m/50m
Special sizes made to order
Proof testing: planks proof loaded and rigidity measured for verification of strength claims. Standard verification testing is regularly completed both in the mill and by the independent third party.
Proof testing: planks proof loaded and rigidity measured for verification of strength claims. Standard verification testing is regularly completed both in the mill and by the independent third party.
EPS blocks can be uses are different sizes to produce flotting object or marking in the sheet and fabricated and decoration for building eco frendly statue and many more.
EPS blocks can be uses are different sizes to produce flotting object or marking in the sheet and fabricated and decoration for building eco frendly statue and many more.
18''- 22 base-square groove
1. For casement window
2. Made in ss 304, ss 201
3. Square groove, two- pivots pointed, straight arm or curve- surfaced arm
4. Biggest open angle 90
5. After 50, 000 times opening tests
6. Specification: 4 arms, length 18 base width 22mm, arm thickness 3.0mm.
20''- 22 base-square groove
1. For casement window
2. Made in ss 304, ss 201
3. Square groove, two- pivots pointed, straight arm or curvesurfaced arm
4. Biggest open angle 65
5. After 50, 000 times opening tests
6. Specification:5arms, length 20 base width 22mm, arm thickness 3.0mm.
20''- 22 base-square groove
1. For awning window
2. Made in ss 304, ss 201
3. Square groove, two- pivots pointed, straight arm or curve-surfaced arm
4. Biggest open angle 30
5. After 50, 000 times opening tests
6. Specification: 6 arms, length 20 , base width 22mm, arm thickness 3.0mm
26''- 22 base-square groove
1.For awning window
2. Made in ss 304, ss 201
3. Square groove, two-pivots pointed, straight arm or curve-surfaced arm
4. Biggest open angle 25
5. After 50, 000 times opening tests
6. Specification: 7 arms, length 26 , base width 22mm, arm thickness 3.0mm
20''-20 base- round groove
1. For awning window
2. Made in ss 304, ss 201
3. Roundgroove, one- pivot pointed, straight arm or curve-surfaced arm
4. Biggest open angle 25
5. After 50, 000 times opening tests
6. Specification: 6 arms, length 20, base width 20mm, arm thickness 3.0mm
Description
Aluminum tile, also called corrugated aluminum, is one of the most popular construction material.To a certain extent it could replace stainless steel because its property of lightness and anti-corrosion.
Characteristic & advantages
Very light and easy to assemble
Inexpensive and cost saving
Good property of antirust
Good effect of heat insulation & sound insulation
Moist-proof, fire-proof & dust proof
Usage:
The roof and wall of workshop or warehouse
Temporary house, simply building, dormitory
Cleansing house & office
Packing
Protective film, wood pallet, standard export pacakage
Protective film, wood pallet, standard export pacakage
- produced by advanced technology and equipment using high-purity gypsum as the raw material, auko regular gypsum board bears flat surface, accurate dimensions and assured quality.
- the imported high-quality covering paper has high strength and good adhesive property with plaster core, thus guaranteeing the strength of plasterboard and laying a firm foundation for applying plaster putty or direct decoration.
- light weight and high strength, strong nail-pull resistance, good flatness, low water content, low expansion rate, good durability, favorable processability and easy cutting.
- tapered edge offers easiness for jointing and the surface of joint is smooth and not easy to crack.
- it can adjust indoor humidity to a certain extent and has passed green building material certification for its healthy and environmental property.
Packing in containers
147597 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
