We are a company specialized in manufacturing the gypsum powder production line with annual output from 20,000 to 150,000 tons. We can offer complete set of gypsum powder production equipment, mineral wool board equipment and gypsum board equipment.The success rate of installation and commission reach to 100%. We have got three patents of China (patent number is zl200420091828.4,zl02205203.8,zl01279132.6).We assure you our equipment with super quality and competitive price.
Brief introduction of sand washer: Sand washer is used to wash and select man-made sand (including natural sand). It is widely used to select raw materials by washing in industry such as quarry, mining, building materials, transportation, hydropower and concrete stirring station. Working principle of sand washer: When it is working, electric motor makes the impeller rotate slowly with the help of v-belt, decelerator and gear. Sand and gravel are conveyed to the washing tank through feeder. They tumble and rub each other with the rotating of impeller to remove the foreign substance and destroy the vapor canopy wrapping the sand.The destroying of vapour canopy can facilitate the dehydration. At the same time, water added with high pressure will wash away the foreign substance and foreign body with low specific density to be discharged from over fall weir. Then the washing is finished. Clean sand and gravel are taken to the outlet sank by impeller. Features of sand washer: 1. Simple structure with steady performance. Impeller rotating bearingí»s separation from water and the materials protects itself from being damaged. 2. When used in quarry, it has superior advantages compared with the traditional spiral sand washer as follows (1)less fine sand and stone powder will be missing, (2)sieve is the only part easy to be destroyed (3)it can be used for a very long time without repairing. This series of sand washer is produced combining advanced technologies and current situation in the sand industry. It possesses the features as following: high efficiency, reasonable structure, high throughput, little sand missing. Further more, its gearing is separated from sand and water, so its failure rate is much lower than that of the common sand washers, it is the best choice for the upgrading of the sand industry.
This sand production line has features of high automation, low operating costs, high crushing ratio, low energy consumption, large output, convenient maintenance, uniform granularity and good shape of the products, reasonable gradation, and the produced sand conforms to the national standard of construction sand. The whole line is highly automatic with low operation cost, high crushing ratio, low power consumption, high capacity, low pollution and easy maintenance. The size of the finished product is even and in good shape, which meets the national sand-making standards.
The benificiation Equipment flow produced by our company can provide you with all-around technical support. According to different customers and different mine, my company design different beneficiation complete sets of equipments for you.
Automatic hydraulic block making machine qt-3000 Widely used to produce big size curb stone, crash barrier, etc. Moq:1 set 1.Main technical datas: Max.Pressure 300t Pump output 63ml/r Total power 14kw Overalll dimension 8000x2510x2400mm Production capacity/shift 300-700pcs(curb Stone)/8hours 2.About product qf-3000: The hs-3000 hydraulic presssure model has multi-functions that can be described as below. 2.1 highly automatic with fast production speed. 2.2 it is equipped with belt conveyor and can supply the raw mateial automatically by the bunker, so as to reduce the labor intensity and improve prodution effeciency. 2.3 widely used to produce all kinds of big size curb stone, turf block, crash barrier, as well as all kinds of paver blocks. Normal export standard
Automatic concrete block machine qt6-15 Doulbe feeder, economic style. Min.Order qty: 1 set 1.Main technical parameters: Pump output 40ml/r Vibrating force 80kn Cycle time 15-18s Total power 25.2kw Total weight 7t Pallet size 850x680x20mm 2.Production capacity: Block product dimension(mm) pcs/mould Output per shift(8hours) Hollow block 390x190x190 6 9000pcs Perforated block 240x115x90 15 22500pcs Muti-hole block 240x180x90 9 14400pcs Solid block 240x115x53 32 51200pcs Holland block 200x100x60 21 25200pcs
1.Main technical parameters: Pump output 125ml/r Vibration frequency 5300times/min Cycle time 15-18s Total power 40.7kw Total weight 14t Pallet size 1120x1120x30mm 2.Production capacity: Block product dimension(mm) pcs/per mould Output/per shift(8hours) Hollow block 390x190x190 12 18000pcs Perforated block 240x115x90 32 48000pcs Muti-hole block 240x180x90 20 32000pcs Solid block 240x115x53 64 102400pcs Holland block 200x100x60 42 50400pcs Normal export package
Qt8-15 automatic block making machine Reasonable and compact layout with unique skip design;medium-priced proof Moq:1 set/sets 1. Main technical parameters: Pump output 100ml/r Vibration frequency 5000times/min Cycle time 15-18s Total power 36.7kw Total weight 10t Pallet size 860x860x25mm 2. Production capacity: Product dimension(mm) pcs/mould output/shift(8hours) Hollow block 390x190x190 8 12000pcs Perforated block 240x115x90 18 28800pcs Muti-hole block 240x180x90 12 19200pcs Solid block 240x115x53 39 62400pcs Holland block 200x100x60 28 33600pcs Normal export standard
Rating voltage:380v dynamo type:y100l-6class rating power:3.Kw raating frequency:50hz 680*500*600 130kg
Main parameters: 1)external dimension 1020× 1040× 2480mm 2)principal vibration style table vibration 3)nominal pressure 16mpa 4)vibration frequency 60hz 5)pallet size 680× 540mm 6)gross power 17kw 7)shape period 20-25sec
Main parameters: 1)external dimension 2270× 1470× 2480mm 2)principal vibration style table vibration 3)nominal pressure 16mpa 4)vibration frequency 60hz 5)pallet size 860× 540mm 6)gross power 19kw 7)shape period 20-25 seconds 8)overall weight --3800kg
Main parameters: 1)external dimension 2350× 1650× 2610mm 2)principal vibration style table vibration 3)nominal pressure 16mpa 4)vibration frequency 65hz 5)pallet size 860× 540mm 7)gross power 26kw 8)shape period 12-15sec 9)overall weight-- 6800kg
Main parameters: 1). External dimension 3025*2310*2590mm 2). Principal vibration style table vibration 3). Nominal pressure 16mpa 4). Vibration frequency 50-70hz 5). Pallet size 900× 800mm 6). Gross power 30kw 7). Shape period 12-15sec 8). Overall weight-- 9300kg
Performance & general features Power supply:Three-phase 380V/660V, 50Hz/60Hz accept customization Polarity:2, 4, 6 and 8 standard poles Functioning:Continuous Duty: S1 Centrifugal force: 1KN-200KN Range of output:100W-15KW Speed:700rpm-3000rpm Insulation class:Class B,Class F Level of protection:IP 54,IP55 Electric motor:Three-phase asynchronous motor Wooden crate
Mineral fiber board is a kind of newly decorative material in the world,more and more people realise its superiority.It is widely used in luxury building for fireproofing,damp proofing,heat preservation,sound absorbing and environmental protection performances. It has the features of low investment ,easy to operate ,space small ,and high efficiency.
Paper gypsum board production line is the equipment which produces new building materials--paper gypsum board.Its production process is:ripe gypsum, water and all kind of ingredients that automatically precision measurement, by the continuous, automatic transmission system into the mixture into a homegeneous slurry spred to the continuous movement forward in the gypsum board surface of the paper, in advance process, after shock, the slurry was complete encapsulation of paper from top to bottom.And squeezed into the very rules slab, the slab continuous production line in the strict control of the speed and speed and stability to continue to move forward gradually formed a certain itensity, and shape the rules of wet gypsum board, the cut precision control system set by the precise cut into veneer.Veneer orderd by the control system topology, turning it over into the dryer.The drying temperature is strictly controlled, the board absorbed water lost to evaporation.Plate from the dryer, and advance the process of gradually cooling down the production line.After turns hostile every two stiff surface to fold once more gathers, saws after the reason the board both sides shuts off the regular size, transmits to the automatic hay stacker, piles up the end product waregousing.This prouduction line mainly by three major part is composed, namely.Material room, heating system, integral unit.
Model:rdcm350-11dhb(jzr350) Power: 15hp Hopper hoisting system hydraulic tipping system Power source: diesel engine/water-cooled Capacity (unmixed): 500 liter / 17.5 cft Capacity (mixed): 350 liter / 12.5 cft Mixing time: 45 sec. Water tank volume: 65 litres Max. Aggregate dia. 60mm Max. Trailed speed: 20km/h Capacity per hour: 15 cum / 530 cuf Driving axle two wheel or four wheel Dimension: 3250*2240*3200mm Weight: 1840kg Dimension: 3250*2240*3200mm Weight: 1840kg
It is a new model for installation and maintenance of highway anti-collision guardrail post and beam newly developed according to usersf+ needs. (the equipment has obtained the national patent, no.: zl 01 263422.0). The functions of this product are the same as njj series truck-mounted pile drivers. It adopts independent diesel engine as its driving force. The driving speed is 40-60 km/h. The equipment integrates pile driving and pile extracting, with 240fp rotating device. The equipment does not need turn the direction during driving and drawing the guardrail post on both sides. The equipment can operate independently when separated with the chassis, can adjust the hydraulic driving directions. It is equipped with brake device which is safe and reliable in operation. Main technical specifications Type of hydraulic hammer Tdb180 Tdb230 Size (lf+wf+h) Mm 4200f+1800 f+2800 4200f+1800 f+2800 Engine power Kw 16.2 20 Radius of gyration Mm 2100 2100 Lateral distance Mm 860 860 Highest working height Mm 4680 4680 Working pressure Mpa 16 16 Pile extracting force Kn 78.4 96.5 Impact frequency Hz 5.8-13 10-15 Working height of hydraulic hammer Mm 700-3000 700-3000 Speed Km/h 40-60 40-60. Export adn sea-worthy standard special packaging.
It is a new product developed by us. The product claims good mobility, low oil consumption and reliable brake system. The cab can hold 5 persons, with air conditioning device and can carry installing and repairing materials such as guardrail posts and beams of around 2.5 ton. The chassis of the truck mounted pile driver is isuzu brand vehiclef+s chassis. Special mounted equipment is national patented product, the patent no. Is zl 01 263422.0. The special hydraulic equipment has appropriative tools, which can do pile driving and pile extracting for guardrail post easily, with turning around of 240fp, so that it is unnecessary to turn the direction of the truck-mounted pile driver when driving and drawing the posts on both sides. With the characters of easy operation, convenient repairing and good reliability, the product can greatly reduce the working strength, improve the installing and maintenance quality and speed, thus being the best product for installation and maintenance of highway guardrail post and beam. The product has been widely applied to the dozens of highway in the country; all these products are quite welcomed by users. Main technical specifications Item Unit Njj5071tqx Njj5072tqx Type of chassis Nkr77lllwcjay Nkr77lllwcjay Weight Kg 4300 4350 Max. Weight Kg 6500 6550 Max. Load Kg 2200 2200 Person capacity Person 5 5 Size (lf+wf+h) Mm 6250f+1880f+2850 6250f+1880f+2850 Max. Speed Km/h 95 95 Rated power Kw 96 96 Rotating speed R/min. 2999 2999 Working pressure Mpa 16 16 Pile extracting force Kn 78.4 96.5 Working height of hydraulic hammer Mm 700-3000 700-3000.
The product is mainly applied to repair the crashed and wave shape guardrail beam of highway through 6/7/8/9/10 rollers and accessorial equipment to carry out the reshaping and recovery of guardrail beam of highway, avoid the crook or twist of guardrail beam, thus enabling them to be reused. This is the most perfect equipment in the world with stabilizing performance, easy operation, economical and high efficiency. Main technical specifications Rectifying speedtheoretical speed: 3-5m/min. Roller diameter++80 mm Roller quantity6/7/8/9/10 Rated power30 kw Rated revolving speed132-1320 r/min. G.W.5000 kg Size of working platform450f+500f+4000 mm 450f+500f+2000 mm Working circumstanceheight above the sea levelfn1500m Temperature of circumstance:-20f+f++45f+ Relative humidityfn98%. Export and sea-worthy standard wooden case.
