Batch Type EPS Pre-expander
PRODUCT DESCRIPTION
Batch type EPS Pre-expander
Features:
1.Resin Hopper Capacity for different capacities
2.Fluid Bed Dryer with heater
3.Transfer blower for bead
4.Resin filling blower
5.Pefect sealing and chamber pressure stabilizing ,highly efficient heat transition, energy saving up to 50% comparing to continual type EPS pre-expander.
In the EPS production, sometimes we¡¡¡ê¡èll leave some wasted EPS. By EPS recycling system, the recycled EPS, material can be reused in shape moulding production in a ratio of at least 10-20 percent without any perceptibly optical or physical change of the product quality. For block moulding 20-50 percent or more can be added.
If the production capacity is not very big, we can use mini EPS recycling system as solution.
In the recycling process, we usually use EPS mixer, EPS de-duster and EPS crusher.
standard export packaging
25605 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
Features
Forged steel housings withstand rugged use.
Low weight
High Torque
Very reliable and resistant to wear
Large sliding face
Long stroke machine
High impact energy
Good penetration in hard and soft rock
Low spare parts consumption
Blower for deep hole cleaning
Robust kick-latch type retainers
Parts are interchangeable with Atlas Copco RH658L
This machine can produce roofing panel with tile, effecive is 840mm.
Mahcine size: 7000x1300x1800mm
Power: 5kw
Roller stages: 16 stages
Voltage: 380v50hz or as customer required
Control system: plc
Input coil width: 1000mm
More details, please see:
Http://www.Cold-roll-forming-machine.Com
Http://www.Purlin-rollforming.Com
ALLTECH make Micro-surfacing Paver 'UNISURFACE 8000" is a Cost-effective Surface treatment to improve the Road surface and seal minor Cracks and Irregularities. It is an Environment-friendly alternative as it requires relatively low energy, Emits no pollutants, and is applied at ambient temperatures.
The micro-surfacing mixture consists of asphalt emulsion, graded aggregates (very small crushed Rocks), cement, water, and chemical additives to an existing asphalt concrete pavement surface.
allows you to improve road safety by increasing surface friction.
- It seals the existing pavement surface.
- Life of the Roadway enhanced with the use of Unisurface 8000
- Road improves Aesthetically.
- Less Material and Energy Consumption
We have introduced UNISURFACE 8000 with the daily production capacity (at 10 kg/m) is 1500 m to 9200 m
Make UNISURFACE 8000 Machine is based on high tech Design, to keep the Plant at Low Maintenance / to keep the plant free of Maintenance. So, is the Brand for Innovation and Reliability.
Superior Quality and Best Performance has always been our top priority. Manufacturing Process & Installation is as per Indian Standards. Our aim is to serve customers the Best Quality, Utility, and Durability to get maximum customer satisfaction.
Clay Brick Making Machines are perfect for producing red clay bricks with a comprehensive range of features. It is made with 18 Ton weight and is certified with ISO 9001. This machine provides a capacity of between 10000-20000 B/hr, allowing for efficient and reliable red brick manufacturing. The main function of the Clay Brick Making Machines is to make red color clay bricks. It is a fully automatic clay block making machine and clay brick production line which is designed for providing high quality and durable clay bricks.
The Clay Brick Making Machines are equipped with advanced technology and features such as automatic brick forming and auto pallet feeding, allowing for easy and smooth production of red bricks. It is an ideal solution for red brick manufacturing businesses that are looking for a reliable and cost-effective machine to produce high-quality red bricks. The Clay Brick Making Machines are designed to be energy efficient and provide a low cost of production.
With its advanced and innovative technology, the Clay Brick Making Machines are the perfect choice for any red brick manufacturing business. This machine is designed to be durable and reliable, making it an ideal choice for producing red bricks efficiently and cost-effectively. It is the perfect solution for producing high-quality and durable red bricks.
JKY55 Double Stage Vacuum Extruders can extrude out the materials into the mud column at the vacuum condition. The working pressure is 0.092MPa, extruding capacity can be 20000 bricks per hour, calculated as 240*115*53mm standard solid bricks.
Raw materails can be clay, shale, coal gangue, river sludge, contruction waste, etc. Double stage vacuum extruders are the perfect choice for the clay brick manufacturers.
A&S Construction Machinery Co., Ltd. supplies all types of gears.
All the brands of gears we can provide:
CAT gears, KOMATSU gears, JOHN DEERE gears, SANY gears, XCMG gears, VOLVO gears, HITACHI gears, SUMITOMO gears, LIEBHERR gears, DOOSAN gears, CASE gears, BOBCAT gears, KUBOTA gears, YANMAR gears, HYUNDAI gears, DAEWOO gears, etc.
For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.
A&S Construction Machinery Co., Ltd. supplies all types of Flywheels.
All the brands of Flywheels we can provide:
CAT Flywheels, KOMATSU Flywheels, JOHN DEERE Flywheels, SANY Flywheels, XCMG Flywheels, VOLVO Flywheels, HITACHI Flywheels, SUMITOMO Flywheels, LIEBHERR Flywheels, DOOSAN Flywheels, CASE Flywheels, BOBCAT Flywheels, KUBOTA Flywheels, YANMAR Flywheels, HYUNDAI Flywheels, DAEWOO Flywheels, etc.
For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.
A&S Construction Machinery Co., Ltd. supplies all types of Seals.
All the brands of Seals we can provide:
CAT Seals, KOMATSU Seals, JOHN DEERE Seals, SANY Seals, XCMG Seals, VOLVO Seals, HITACHI Seals, SUMITOMO Seals, LIEBHERR Seals, DOOSAN Seals, CASE Seals, BOBCAT Seals, KUBOTA Seals, YANMAR Seals, HYUNDAI Seals, DAEWOO Seals, etc.
For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc..
Box Culvert Machine; It produces Concrete Culverts between 800 -
800mm and3000 - 3000mm in minimum 1000mm and maximum
2000mm lengths.
Production is made by connecting a single mold in all sizes.
Vibration system of the machine is with liquid oil closed circulation system. Automatic lubrication system is activated with machine operation. SKF or FAG bearings resistant to high cycles and heat are
used in the vibrator.
1. Excavators are important and widely used equipment in construction industry. Their general purpose is to excavation but other than that they are also used for many purposes like heavy lifting, demolition, river dredging, cutting of trees etc.
2. Backhoe is another widely used equipment which is suitable for multiple purposes. This is well useful for excavating trenches below the machine level and using front bucket loading, unloading and lifting of materials can be done.
3. Dragline excavator is another heavy equipment used in construction which is generally used for larger depth excavations. For the construction of ports, for excavations under water, sediment removal in water bodies etc. can be done by dragline excavator.
4. Bulldozers are another type of soil excavating equipment which are used to remove the topsoil layer up to particular depth. These are widely used for the removal of weak soil or rock strata, lifting of soil etc.
5. Pile Driving Equipment. Another heavy equipment used in construction site is pile driving equipment in case of pile foundation construction.
6. Pile boring equipment is used to make bore holes in the construction site to install precast piles.
7. Dump trucks are used in construction sites, generally, in big construction site, off-road dump trucks are used.
8. Feller buncher is tree cutting heavy equipment used to remove large trees in the construction field.
9. Telehandlers are hoisting equipment used in construction to lift heavy materials up to required height or to provide construction platform for workers at greater heights etc.
10. Compactors or Rollers are used to compact the material or earth surface. Different types of compactors are available for different compacting purposes.
11. Paver or Asphalt paver is pavement laying equipment which is used in road construction.
12. Tower cranes are fixed cranes which are used for hoisting purposes in construction of tall structures. Heavy materials like pre-stressed concrete blocks, steel trusses, frames etc. can be easily lifted to required height using this type of equipment.
13. Wheel Tractor Scrapers are earth moving equipment used to provide flatten soil surface through scrapping.
14. Graders also called as motor graders are another type of equipment used in construction especially for the construction of roads. It is mainly used to level the soil surface.
15. Trenchers or Trenching machines are used to excavate trenches in soil. These trenches are generally used for pipeline laying, cable laying, drainage purposes etc. Both types of trenchers are available in tracked as well as wheeled vehicle forms.
16. Loaders are used in construction site to load the material onto dumpers, trucks etc. The materials may be excavated soil, demolition waste, raw materials, etc. A loader contain large sized bucket at its front with shorter moving arm.
Product Description
This machine is a kind of screw type with high pressure mortar spraying machine, advanced technology, operation and simple maintenance, no special training, can be proficient in operation. This machine is mainly used for building internal and external wall, cement mortar spraying and the outer wall insulation mortar spraying, refractory coating.
Specification:
Model
KLW-180J Plaster Machine
Voltage
380V
Motor power
7.5kW
Output pressure
5Mpa
Delivery dist.
30m
Max. aggregate size
6mm
Water: cement:sand
0.7-1:1:3
Hopper volume
80L
Delivery pipe
32mm
Air compressor
0.36m3/h
Weight
380kg
Features:
1.KLW-180J plaster machine with removable hopper.
2. Multi-functional equipment with mixing, pumping, plastering device.
3. The spray speed,capacity, pressure are adjustable.
4. Small size, simple struction, easy operation and maintenance.
Application:
1.The Plastering Machine is a new desinged multi-functional plastering equipment.
2.The Plastering Machine can be used for pumping and spraying ready-mixed mortar material, such as cement mortar, lime plaster, gypsum plaster, masonry mortar.
3.The Plastering Machine can be used for plastering fluid materials, such as thermal insulation material of walls, refractory material, fire-proof material, water-proof material, acoustic material, water soluble etc.
25605 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.