Product specification Description Solar road stud (square shape) Model number zszm-dd-j-10xx-x Product dimension 103*103*22 mm Mono-crystalline silicon solar cell, 100ma Voltage 2v Output max consumption 0.2w Battery ni-mh battery, 1.2v, 650 mah Led Light source epistar Quantity 2 &3 pcs / side Colour Red/white/yellow/green/blue/amber Frequency 2hz¡à20% or continual light Visible distance >800 m Working time 98 hours after fully charged Light intensity 6000~10000 mcd Starting light intensity
Description Solar road stud (round shape) Model number Zszm-dd-s-dxxx-x Product dimension D125¡à5*25 mm Power material Mono-crystalline silicon solar cell, 100ma Voltage 2v Output max consumption 0.2w Battery Ni-mh battery, 1.2v, 650 mah Led Light source Epistar Quantity 2 &3 pcs / side Colour Red/white/yellow/green/blue/amber Frequency 2hz¡à20% or continual light Visible distance >800 m Working time 98 hours after fully charged Light intensity 6000~10000 mcd Starting light intensity
The SE2404NTN series seismic data acquisition system is a portable wired telemetry seismic data acquisition system. This system uses advanced networking technology for distributed real-time data acquisition and display. The Printer and tape drives (optional): PC compatible USB printer and tape drive Control software: Monitoring system Seismic data acquisition, data quality control Real-time noise monitoring, data display and recording RSU-2 Data Acquisition Unit Technical Specifications A/D Converter: Δ Σ24 bit Localisation: automatic self-localisation Data filtering: linear filter Number of channels: 12 Sampling frequency: 0.025 - 10 ms (selectable) Longest length: 31 kB/channel Frequency response range: 1 - 1500 Hz Cross-channel suppression: < -100 dB Dynamic range: 120 dB Harmonic distortion: -114 dB Largest input signal: 1.6 V RMS Noise level: < 1 UV RMS Power usage: 2.5 W / unit Operating temperature: -40 to 80 degrees C Storage temperature: -40 to 70 degrees C Weight: 1.6 kg Size: 200 X 90 X 180 mm Power source: built-in lithium battery, 18 hours battery life BOMTEX 2 Remote Detonator Technical Specifications Remote control distance: 2 km (open ground) Frequency range: 433 - 435 MHz / 1 W / 8 channels Timing GPS (optional): 15 meter positional accuracy, 0.5 microsecond timing accuracy Detonation voltage: 500 V Detonation interval: 20 s Trigger error: < 100 microseconds Trigger error calibration: TB Channel Battery life on standby mode: 36 hours Operating temperature: -40 to 80 degrees C Protecting
Tsp24 tunnel geological advance detection Tunnel seismic prospector Function: The tsp24 tunnel geological seismic probing system combines advanced geological surveying technology with Channels no.: 24 Frequency range: low frequency channels (24): 0.5 hz - 10 khz High frequency channels (6): 50 hz - 50 khz Preamplifier gain: 16 - 48 db Input impedance: 20 kohm A/d converter: 24 bit Sampling interval: low frequency channels (24): 0.025 - 5 ms High frequency channels (6): 0.00625 - 0.4 ms Dynamic range: 144 db Cross-channel interference: 100db Synchronization mode: wired pulse, gps timing, gfsk radio (433 mhz) Monitor: 9" (16: 9), 1024x600 Processor: intel (r) atom (tm) n270 1.6 ghz Ram: 1gb Hard drive: 160 gb Size: 320 x 180 x 90 mm Weight: 4.5 kg Operating temperature: -20 to 60 deg c Power consumption: 12v / 1.2 a Built-in lithium battery: 7.4v/17.6ah (10h operating time) Protecting packing
Applications Shallow reflected or shallow refracted wave surveying, transient rayleigh wave surveying, wave speed testing, ground s the world's smallest engineering seismic surveying equipment at present. 3. Built-in scrolling switch for ease of covering multiple reflected wave surveys 4. Contains all shallow seismic surveying functionality 5. Windows 2000 operating system 6. Chinese user interface 7. Water-tight keyboard and mouse buttons 8. Two usb ports 9. Signal edge trigger, ttl trigger synchronization Main specifications: Channel no: 24 Sampling interval: 25 us- 10 ms (selectable) Bandwidth: 0.1 hz - 5000 hz Programmable analog filter Low cut filter: 10-200 hz programmable High cut filter: 500-2000 hz programmable Band cut filter: 50/60 hz A/d (ifp's) precision: δ σ 24 bit Computational precision: 32 bit Equivalent noise: 1μ v, rfi (at 2.0ms sampling rate) Cross-channel interference: > 80db Harmonic distortion: -114 db (at 2.0ms sampling rate) Data display and recording: Main processor: intel pentium 500 mhz processor Memory: 118 mb Internal hard drive: 10 gb Monitor: 1024 x 512 8" svga Data transfer: usb Data storage: seg2, segy, and geopen data format System self-test criteria Static voice sound, cross-channel consistency, cross-channel isolation Main unit size and weight Size: 330x180x100mm, weight: 4.5 kg Environmental tolerances: Operating temperature: -20 to 50 deg c Storage temperature: -40 to 70 deg c Operating humidity: 0 - 95% Protecting packing
We provide all kinds of used construction machines including: used cranes, used excavators, used loaders, used bulldozers, used road rollers, used forklifts, with different makes like tadano, kato, kobelco, p&h, sumitomo, hitachi, liebherr, grove, krupp, demag, xcmg, komatsu, caterpillar, hyundai, Excavator: 1.Hitachi ex75-3, ex100wd, ex120, ex200-1, ex200-2, ex200-3, ex200-5, ex220, ex350, zx200, zx350, zax450 2. Komatsu pc60, pc120, pc130, pc200, pc210, pc220, pc300, pc320, pc350, pc380, pc400, pc420, pc450, pc470, pc650 3. Cat cat312b, cat320b, cat320c, 320d cat325b, cat330b, cat 330c 4. Hyundai, daewoo, kebolco, sumitomo, etc Bulldozer: 1. Caterpillar d6d, d6h, d6l, d7h, d7l d7g, d7r, d8r, d8k, d8g, d8n, d9h d9l, d9r, d10n, d11n 2. Komatsu d75a-1, d85a-18, d85a-21, d155-1, d155-2, d355, d375 Road roller: 1. Dynapac ca25, ca30 (weight: 8t-14t) 2. Bomag bw213d-2, bw217d-2, bw219d-2 Wheel loader: 1. Komatsu wa300, wa350, wa360, wa380, wa400, wa470 2. Cat cat936e, cat950b, cat950f, cat966d, cat 966e, cat966f 3. Kawasaki kld65z, kld70, kld70b, kld80, kld85, kld85z 4. Tcm tcm230, tcm870 Motor grader: 1. Cat 12g, 120g, 14g, 16g, 140h 2. Komatsu gd511a, gd605r, gd623a Truck crane: 1.Kato:nk200, nk250, nk300e-3, nk350, nk400e-v, kr-25h-v, kr-45h-v, ss500, nk500e-v, nk800, nk1200, nk1600 2.Tadano:tl250e, tl300e, tg250e, tg300e, tl300e, tr300m, tr350m, tg352, tg400e, tg452, tg500e, tg550e, gt550e, tg650e, tg800e, tg1200e, tg1500 Crawler crane: 1. Hitachi kh125 35t, kh180 50t, kh700 150t
This is used for making asphalt road. This machine has different capacities like dm 25, 35, 45, 50, 60, 90. The rate is differ as per capacity. As per requirements of product or model.
Introduction: This vehicle is multi-functional and high efficient road maintenance equipment which are widely used for repairing road pit, cracks and so on. It can heat and regenerate the road material, asphalt mixture material. It also can heat and spray asphalt, emulsified asphalt and compact road surface. It also can be equipped with road roller and hydraulic output device.
Introduction: The vehicle can be used to transport and asphalt mixture and keep it warm in long time and distance. It has function include warm keeping, emulsified asphalt spraying compacting and are equipped with hydraulic output system..
Introduction The equipment is a multi-functional road maintenance vehicle. It has function of regenerating asphalt mixture, asphalt spraying, and emulsified spraying, .compact road, drilling, rust removal. Electric output system. It can be equipped with road roller, electric hand driller, and electric pick. The vehicle has automatic uploading facility, electricity generator, and hydraulic system.
Handpush thermoplastic road marking machine's floor knife adopts imported hard tungsten steel knife-head with high viscidity and abrasion resistance, which makes the line edge facile and straight. 1.Marking shoe: Marking shoe and paint tank are integrally designed and hung inside frame of the chassis.The discharging port adopts double-closure to avoid leaking. Screeding knife made of fire resistance, abrasion resistance and oxidation resistance adopts screeding structure to make good quality markings, which ensures the head of marking more regular. Sieve in the paint tank effectively removes the impurity in it. The capacity of the shoe:65kg 2.Heating system: Petroleum liquified gas tank is used for respectively gas to front and back two row nozzles and outside inflame gun, whose power is controlled by different valves. The valves and gas tools adopt imported parts, and connection pipes are imported rubber pipes with heat and pressure resistance. 3.Glass beads bin: With gear transmission, the dispensing gear definitely rolls. Equip with automatic clutch device synchronous with screeding shoe; bin with windows can check the quantity of glass beads in time. The capacity: 30kg. 4.Chassis: Firm welding frame, the surface has been galvanized, chrome-plated or high temperature treatment. Equip with heat resistance (350), abrasion resistance modified rubber with the diameter 200mm, which can effectively prevent tackless or deformation after long time of high temperature work. The wheel nave is made of refined steel, and equip with high speed imported bearing, which makes the whole machine lighter and more convenient. 5.Handle bar: Individual design conforms to the requirements of human body project. The operation height can be adjusted according to the needs of the operator.
Dy-hpa hand-push airless road marking machine is one of the frequently-used equipment in cold solvent road marking construction. It has refined and simple exterior design, and is easy to operate and can meet different specifications of construction requirements. 1) engine: the united states briggs & stratton 5.5.0hp gasoline engine. 2) paint pump: adopt imported diaphragm high pressure airless pump, large flow volume and stable pressure. The highest pressure is 20mpa (work pressure is 10-15mpa), the largest flow volume is 8.5l/min. 3) paint tank: the capacity is 60l. Equipped with filter device in paint tank and a whole type filter in the feeding port of tank . 4) spray gun: double manual spray guns with hard-edged cylindrical nozzle reverse decontamination, to decontaminate at any moment. The 6m lengthening pipe is equipped used for spraying arrow, words and other special marks. 5) direction control: back wheel locating device ensures the machine to walk along straight line and easy to operate when turning. 6) spray width: 100-450mm. 7) net weight: 190kg. 8) dimension: 1280mm (length)íß980mm (width)íß1030mm (height) Wooden case
Scarifier machine are specially used in scarifying and cleaning concrete and asphalt surface, such as sidewalk repairing, coating removal, floor cleaning, and traffic marking removal, wipe off epoxy resin and wearproof ground as well as old damaged surface and dirt retention. The declination-feed milling-planning mode and the design of adjustable milling depth ensure the quality of the milling.
1. Engine: original japanese honda or robin 13hp 4-stroke air-cooled petrol engines. 2. Chassis: firm welding frame, whose surface hass been chrome(zinc)-plated or corrosion resistant treatment, and the chassis is equiped with imported high-speed bearing which ensures the machine more lightsome and convenient. 3. Rubber wheel: left and right front wheels are inflatable vacuum wheels which are pressure-proof. Diameter: 350mm; The back jockey wheel is natural rubber wheel that is of special wear-resistant modification. Diameter: 190mm. 4. Front wheelf+s orientator: it can lock the orientator of the front wheel to ensure that the road marking machine turn freely whether it is along a straight line or a curve turning . 5. Guiding bar: it can freely adjust up, down, left, right. 6.Paint pump: we adopt the new diaphragm-type high-pressure paint-free pump machines manufactured by chongqing yangtze river application co., the pump flow rate is high and the pressure is steady, and it is reliable. The machine is appliable for cold solvent road marking paint. The maximum pressure 20mpa (working pressure for the 10-15mpa), the maximum flow of a single pump is 9l/min. 7. Paint can (optional): capacity:80kg. Can is equipped with a filtering system and the feed port is equipped with suction-type filters. 8.Spray gun: configured with three new manual spray guns and hard-edged cylindrical nozzle which is of the function of reverse cleaning (20/25 or 30/25). Non-arc nozzles make sure the markings straight and accurate. Switched carter single(double/three)-gun(s) controller is to insure the sigle cylinder and the double cylinder alternate freely. 9. Paint: it is appliable for cold solvent road marking paint . 10.Spray width: 80-450mm. Dimensions: 1350 mm (length)* 1000 mm (width) *1070 mm (height). Total weight: 135kg (without drums).
Zebra crossing heat fusion road marking machine is the accessory equipment for heat fusion making machines. It is used to smear the zebra crossing lines (sidewalk lines)and the entrance or export lines (guilding lines) on the high way. The pulling direction is same as the working direction. The machine uses hard alloy knife which can make the linef+s edges and corners neat and beautiful at one time. The knife is flexible and easy to adjust the thickness of the marking lines. Size: 1250*750*900mm Net weight: 90kg
Primer, a bonding material is used when making the heat fusion road markings. The prime can prevent the film from coming off and strengthen the adhesive force between the film and the road surface. Primer(sprayable) machine is the assistant equipment for drawing heat fusion markings. It chooses the gasoline engine as its power working together with the auto aircompressor to paint, which improves the working efficiency, meanwhile reduces the intensity of labor. It will not bring any noise or pollution. The guide bar of the paint gun can be adjusted up and down, in order to adjust the width of the paint accuratly and conveniently. The machine is easy to operate and maintain, moreover, its service life is long. Size: 800*400*850mm Net weight: 50kg
We are reckoned as one of the prominent Batch Mix Plant Manufacturers in India. The materials used in the manufacturing of the Asphalt Batch Mix Plant ensure high durability, tensile strength and resistivity to adverse conditions. Various national as well as international clients are placing repeated orders for the Asphalt Batch Mix Plant as no alternative is available in terms of quality and performance. Additionally, customers are eased with the availability of the Asphalt Batch Mixing Plant loaded with all the advanced configurations. Salient Features: Each bin has independent belt conveying system driven by ac variable speed motors. Dryer unit completely insulated. Dust suction by primary dust collector with bag house air pollution control unit. Dust-filler refilling arrangement is provided with storage silo & bucket elevator. Insulated hot aggregate service hoppers are Retention hopper is insulated. Mixing unit (pug mill) is jacketed for thermic fluid circulation with outside insulation. Bitumen service bucket is jacketed for thermic fluid circulation with outside insulation. Additional storage silo facility can be provided if required. Accurate job mix and ¦c control. The plc base auto control panel with production printer.
We manufacture superior quality reversible drum mixer & concrete batching plant 10m¦/hr, 12m¦/hr & 15m¦/hr capacity, with superior quality steel. The machine is incorporated with excellent technology and robust design for long term continues trouble free work possess and have the following: Specifications: Two/three bin digital weighing system Automatic digital water feeding system Automatic cement feeding system Automatic digital admixture feeding system Automatic metal and sand feeding system.
Asphalt Drum Mix Plant are offered with capacity ranging from 40 to 120 TPH. These plants are made from heat & abrasion resistant MS plates to give excellent durability by our team of experts who leave no room for any flaw.The plants are available in reliable and proven designs and have advanced technical features.
Mobile Bitumen (with Truck)-Capacity up to 7000 Liters. We offer our clients a Mobile Bitumen (with Truck) Capacity up to 7000 Liters.These distributors are used for applying a uniform coating of hot Bitumen on specified surface in set quantity and are fitted with unique Pressure Cleaning System (PCS).These distributors are mounted on truck chasis of Ashok Leyland and TATA and are reckoned for following features: - Bitumen tank is Rectangular Oval Shape Bitumen Pump: 2" x 2" size Positive displacement gear Pump with output of 350 Lit. / Min. (Max) Driving Unit : Kirloskar Engine Model HA-294, 25 BHP Air Cooled Engine Vertical type Bitumen Spraying Pressure - 0 to 6 Kg/cm¦ Tachometer - Slow Speed 0.5 meter / min. Capacity : 7000 Liters.
