Drum type magnetic separator is most useful for separating tramp iron from non magnetic material processed in bulk quantity, for the purity of end products, recovery of metal having commercial value and protection of processing plant and machinery. These are widely used in all the processing industry for separation of iron contamination from minerals, chemicals, food, flour, plastics, grains, sand, cement, fertilizers, abrasives, glass, slag, ores, rock, refractory and many other products.
Salient features:
- drum consists of high powered anisotropic permanent magnet
- strong & rugged construction.
- automatic separation of ferrous material.
- completely enclosed design to avoid dusting and pollution.
Mas baiyun ctb wet drum separator is newly developed iron ore concentrating equipment under wet conditions.It has been designed by engineers having a wealth of knowledge and data, gained over many years of wet drum applications and experience.
We offer a complete service to mining and mineral industries. Our wide and competitive wet drum separators allow us the freedom to select the correct size and type to meet precisely your process needs in the best techincal and cost effective manner.
This kind of magnetic separator can provent the final product from the secondary contamination because of the washing action adopted in the processing. It is equipped with a respective spray pipe for feed and concentrates, and water amount can be adjusted so as to assure suitable density of the concentrate. It can be equipped with cocurrent, counter-rotation and counter current tanks, and equipped double drums or three drums according to requirements of customers.
The equipment has high magnetic induction intensity to attract the ore with size up to 350mm, and can be applied with various model belts according to the customersí» demands.It is mainly used at the preseparation
Stage to rejecting excess gangues.
Maximise recovery of ferrous metals
High performance magnet design to suit your application (ferrite, rare earth) to provide the most effective and efficient method of metal recovery.
Minimise maintenance
Wear resistant non-magnetic drum skin. Permanent magnet drums are built using high intensity non-deteriorating material, so not only is no power required to the magnet, but it will also provide maximum magnetic force for the lifetime of the machine. High permeability magnetic circuit to minimise stray magnetic fields, prolonging their life.
Optimise throughput
Deep field magnet systems penetrate through the product burden and remove the maximum amount of ferrous metal. This allows for a higher throughput of material to be separated efficiently.
Weight nw: 34, 450 kg
Max. Load: 14, 000 kg
Front bridge load: 16, 600 kg no-load
Rear bridge load: 17, 850 kg no-load
Front bridge load: 38, 500 kg full load
Rear bridge load: 9950 kg full load
Operation ability
Maxi. Speed
Full load, advance / retreat, flat road
Gear 1: 4.1 km / h
Gear 2: 7.5 km / h
Gear 3: 14.3 km / h
Gear 4: 26.5 km / h
Max. Slope (load): 25%
Max. Traction: 330 kn
Hydraulic system
Designed to use imported hydraulic valve, eg. Bosch, rexroth, fk506 suodanbishimo, kewobaike
Driving system
Torque converter
Manufacturer: dana, the united states
Model: series8000
Design: single-industrial-type hydraulic auxiliary drive system
Gear-box
Manufacturer: danad, the united states
Model: series5000
Design: power shift 4 forward stalls after 4 tuidang
Drive bridge
Manufacturer: dana, the united states
Model: 21 d4354
Design: self-locking rigid bridge with no-spin slide-proof differential speed.
Weight nw, 10000 kg
Max. Volume: (sae, stowing), 5.5m3
Maximum load: 10, 000 kg
Operation ability
Max. Speed
Full load, forward / backward, flat road
Gear 1: 0-3.5 km / h
Gear 2: 0-7.0 km / h
Gear 3: 0-13.0 km / h
Gear 4: 0-23.0 km / h
Max. Slope (full load): 3.3 km / h 25%
The greatest traction: 197 kn
Brake
Braking system: dual pipeline hydraulic brake system
Wet completely closed multi-disk brake
Work brake:
Design: multiple disk external liquid cooling hydraulic operation
Parking brake design: spring brake hydraulic release
Brake pressure: 130-150 bar
Driving system
Torque converter
Manufacturer: dana, the united states
Model: c273
Design: single-industrial-type auxiliary drive hydraulic system
Gearbox
Manufacturer: dai satisfied that the united states (dana)
Model: r28000
Design: power gear-shift, 4 forward gears and 4 backward gears
Drive bridge: meichi, xuzhou
Model: soma c103
Hydrolic system
Designed to use imported hydraulic valves, eg. Bosch\ rexroth\ fk506\ suodan\ bishimokewobaike
Weight nw, 255000 kg
Max. Volume: (sae, stowing), 15 m3
Max. Load: 25, 000 kg
Front bridge load: 14, 950 kg no-load
Rear bridge load: 8050 kg no-load
Operation ability
Max. Speed
Load, advance / retreat, flat road
Gear 1: 5.0 km / h
Gear 2: 11.0 km / h
Gear 3: 19.0 km / h
Gear 4: 26.0 km / h
Max. Slope (load): 3.3 km / h 25%
Max. Traction: 231 kn
Brake
Braking system: hydraulic brake system
Brake work:
Design: multiple disk external liquid cooling hydraulic operation
Parking brake / emergency brake
Design: spring brake hydraulic release
Brake pressure: 130-150 bar
Driving system
Torque converter
Manufacturer: dana, the united states
Model: c5472
Design: single-industrial-type auxiliary drive hydraulic system
Gear-box
Manufacturer: dana, the united states
Model: r36420
Design: power gear-shift, 4 forward gears and 4 backward gears
Drive bridge:
Manufacturer: dana, the united states
Model: 19 d2748
Designno-spin slide proof self-locking differential speed for front bridge
Equipped with sand making machine, XSD series sand washing machine with wheel-like structure is necessary in sand making. Adopting advanced technology and taking practical condition of crushing industry into consideration, XSD sand washing machines are applied for washing, grading and dehydrating in construction site, sand making factory, hydroelectric station dam, glass manufacturing, and oil well development.
Model XSD2610 XSD3016
Spec. of Impeller(mm) ª¦2600í-1000 ª¦3000í-1600
Impeller Speed(r/min) 1.178 1.179
Capacity(t/h) 20-50 50-120
Input Size(mm) í_10 í_10
Weight(t) 2.68 3.26
Motor Power(kw) 5.5 15
Decelerator Model ZQ50-50-T-Z ZQ65-50-T-Z
Overall Dimension(mm); (LxWxH) 3255x1982x2690 3845x3000x3080 .
Ball mill is an important grinding mill for grinding after materials are crushed and also an efficient tool for grinding various materials into fine powder.There are two ways of grinding: the dry process and the wet process. Ball mill can be divided into tabular type and flowing type according to different forms of discharging material.
Weight nw: 25, 300 kg
Max. Load: 9500 kg
Front bridge load: 11, 800 kg no-load
Rear bridge load: 13, 500 kg no-load
Front bridge load: 26, 595 kg full load
Rear bridge load: 8205 kg full load
Operation ability
Max. Speed
Full load, advance / retreat, flat road
Gear 1: 4.0 km / h
Gear 2: 8.3 km / h
Gear 3: 15.4 km / h
Gear 4: 25.0 km / h
Max. Slope (load): 25%
Max. Traction: 227 kn
Brake
Braking system: work / hydraulic parking brake system integration
With the lifting handle
Brake work:
Design: multiple disk external liquid cooling hydraulic operation
Brake pressure: 110-150 bar
Parking brake / emergency brake
Design: spring brake hydraulic brake released four security
Driving system
Torque converter
Manufacturer: dana, the united states
Model: series8000
Design: single-industrial-type hydraulic auxiliary drive system
Gear-box
Manufacturer: dana, the united states
Model: series32000
Design: power gear-shift, 4 forward gears and 4 backward gears
Drive bridge
Front bridge
Model: d102
Manufacturer: germany kessler (kessler)
Rear bridge
Manufacturer: kessler, germany
Model: d102
Design: with ordinary differential speed
Weight nw: 12500 kg
Max. Load: 4000 kg
Front bridge load: 5625 kg no-load
Rear bridge load: 6875 kg no-load
Operation ability
Max. Speed
Full load, forward / backward, flat road
Gear 1: 3.6 km / h
Gear 2: 7.6 km / h
Gear 3: 12.5 km / h
Gear 4: 20 km / h
Max. Slope (full load): 14%
Max. Traction: 104 kn
Brake
Design: multiple disk external liquid cooling hydraulic operation
Brake pressure: 110-138 bar
Parking brake / emergency brake
Design: spring brake hydraulic release
Hydraulic system
Designed to use imported hydraulic valve, eg. Bosch, rexroth, fk506, suodan, bishimokewobaike
Driving system
Torque converter
Manufacturer: dana, the united states
Model: c272
Design: single-industrial-type auxiliary drive hydraulic system
Gear-box
Manufacturer: dana, the united states
Model: r28421
Design: power gear-shift 4 forward gears and 4 backward gears
Drive bridge: meichi, xuzhou
Model: q150
Design: no-spin slide proof self-locking differential speed for front bridge, ordinary differential speed for rear bridge
Raymond mill is suitable for grinding the nonflammable and nonexplosive materials with humidity below 6 % and mohs hardness less than 7, such as barite, calcite, feldspar, limestone, marole, glass and so on.Model:3r2615 max.Charge granularity(mm):20 discharge granularity(mm):0.125-0.044 shift output(t):2-25 central shaft velocity(r/min):165 inner diameter of the ring(mm):780 diameter of the roller(mm):260 motor of main machine(kw):y225s-8-18.5
It is developed by our engineers through many years' hard work on the basis of rich experience of industrial mills.It is mainly used in super powder processing with more than 500 kinds of materials such as feldpar,talcum,barite,marble,limestone.charcoal blacks and china clay,with output fineness of 500 meshes(25um) to 2500 meshes(5um) and the finest powder can be 3500 meshes(3.55um).Model:7826 No.of Roller(piece):3 Diameter of Roller(mm):260 Inside Dia of Ring(mm):780 Speed of Main Frame(r/min):160 Max.Feed Size(mm):20 Capacity(t/h):25-500 Motor Model of Main Frame and Power(kw):Y225S-8-18.5 Total Power(kw):45 Diamension L*W*H:4.1*4.2*5.1 Weight(t):4.8 Output Size(mm):500 mesh(0.25)-1250 mesh(0.01),the finest 2500 mesh(0.005)
Ball mill is the main part of grinding system, which is essential in the cement production. Our company is qualified to supply kinds of large ball mills for production line. All kinds of central drive, side drive, central discharge, slide-shoe bearing mill that can help you to produce qualified cement are in our range. The ball mill can be widely used in cement production, metallurgical, chemical industry and etc.
This equipment uses biserial and centripetal spherical rod mandrel which can automatically adjust. The operation resistance of the equipment is extremely small, so its energy-saving effect is Significant. A section of Cone Cylinder is added to the original cylinder, which not only enlarges the effective volume the mill, but also makes the media inside the cylinder distribute more reasonably. It is widely used for grinding materials in the mineral dressing plant of non-ferrous metals and ferrous metals, as well as the Chemical and building materials lines.
The machine is mainly applied to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. it can produce powder from various non-flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, Xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal Gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundun, heat insulating material, etc.
25637 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
