Box Culvert Machine; It produces Concrete Culverts between 800 -
800mm and3000 - 3000mm in minimum 1000mm and maximum
2000mm lengths.
Production is made by connecting a single mold in all sizes.
Vibration system of the machine is with liquid oil closed circulation system. Automatic lubrication system is activated with machine operation. SKF or FAG bearings resistant to high cycles and heat are
used in the vibrator.
1. Excavators are important and widely used equipment in construction industry. Their general purpose is to excavation but other than that they are also used for many purposes like heavy lifting, demolition, river dredging, cutting of trees etc.
2. Backhoe is another widely used equipment which is suitable for multiple purposes. This is well useful for excavating trenches below the machine level and using front bucket loading, unloading and lifting of materials can be done.
3. Dragline excavator is another heavy equipment used in construction which is generally used for larger depth excavations. For the construction of ports, for excavations under water, sediment removal in water bodies etc. can be done by dragline excavator.
4. Bulldozers are another type of soil excavating equipment which are used to remove the topsoil layer up to particular depth. These are widely used for the removal of weak soil or rock strata, lifting of soil etc.
5. Pile Driving Equipment. Another heavy equipment used in construction site is pile driving equipment in case of pile foundation construction.
6. Pile boring equipment is used to make bore holes in the construction site to install precast piles.
7. Dump trucks are used in construction sites, generally, in big construction site, off-road dump trucks are used.
8. Feller buncher is tree cutting heavy equipment used to remove large trees in the construction field.
9. Telehandlers are hoisting equipment used in construction to lift heavy materials up to required height or to provide construction platform for workers at greater heights etc.
10. Compactors or Rollers are used to compact the material or earth surface. Different types of compactors are available for different compacting purposes.
11. Paver or Asphalt paver is pavement laying equipment which is used in road construction.
12. Tower cranes are fixed cranes which are used for hoisting purposes in construction of tall structures. Heavy materials like pre-stressed concrete blocks, steel trusses, frames etc. can be easily lifted to required height using this type of equipment.
13. Wheel Tractor Scrapers are earth moving equipment used to provide flatten soil surface through scrapping.
14. Graders also called as motor graders are another type of equipment used in construction especially for the construction of roads. It is mainly used to level the soil surface.
15. Trenchers or Trenching machines are used to excavate trenches in soil. These trenches are generally used for pipeline laying, cable laying, drainage purposes etc. Both types of trenchers are available in tracked as well as wheeled vehicle forms.
16. Loaders are used in construction site to load the material onto dumpers, trucks etc. The materials may be excavated soil, demolition waste, raw materials, etc. A loader contain large sized bucket at its front with shorter moving arm.
Product Description
This machine is a kind of screw type with high pressure mortar spraying machine, advanced technology, operation and simple maintenance, no special training, can be proficient in operation. This machine is mainly used for building internal and external wall, cement mortar spraying and the outer wall insulation mortar spraying, refractory coating.
Specification:
Model
KLW-180J Plaster Machine
Voltage
380V
Motor power
7.5kW
Output pressure
5Mpa
Delivery dist.
30m
Max. aggregate size
6mm
Water: cement:sand
0.7-1:1:3
Hopper volume
80L
Delivery pipe
32mm
Air compressor
0.36m3/h
Weight
380kg
Features:
1.KLW-180J plaster machine with removable hopper.
2. Multi-functional equipment with mixing, pumping, plastering device.
3. The spray speed,capacity, pressure are adjustable.
4. Small size, simple struction, easy operation and maintenance.
Application:
1.The Plastering Machine is a new desinged multi-functional plastering equipment.
2.The Plastering Machine can be used for pumping and spraying ready-mixed mortar material, such as cement mortar, lime plaster, gypsum plaster, masonry mortar.
3.The Plastering Machine can be used for plastering fluid materials, such as thermal insulation material of walls, refractory material, fire-proof material, water-proof material, acoustic material, water soluble etc.
used Caterpillar 320D excavator made in Japan Year 2012used 1040  hoursS/N: JJGZ01496original painting shipping dimensions: 9.44x2.8x3.74mWeight: 20330kgBucket capacity: 1.2cbmEngine model:CAT 3066ATAACPower: 140hp/104.4kwMax Digging Depth20.7 ft in/6300 mmMax Reach Along Ground31 ft in/9460 mmMax Cutting Height30.5 ft in/9290 mmMax Loading Height20.6 ft in/6290 mmMax Vertical Wall Digging Depth18.5 ft in/5650 mmFor more details please feel free to contact me
25660 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
This is a bagged gypsum based which could be directly applied on such materials as bricks, concrete, aerated concrete, etc
Used indoors.
Single layer creates a smooth surface.
Not need satin surface finishing plaster
Easy usage
Economical
High strength
As an ace manufacturer, supplier and trader of Building Winches, we have marked our name every strongly in the market.
This one is a mechanical device that is used to pull in (wind up) or let out (wind out) or otherwise adjust the "tension" of a rope or wire rope (also called "cable"or "wirecable").
Features :
Little operator Tension
Trouble Free Operation
Elevated Durability
Applications :
Material Handling
Load Carrying
Weight Transfer
MW5 Series Scrap Lift Magnet for Excavator is suitable for transferring cast ingots, steel balls and kinds of steel scraps.
2. Features of magnetic lifter
2.1 It adopts a special magnetic circuit design which has large air space and magnetism density. It is made of aluminum wire and the coil protection plate is made of the rolled high Mn steel plate that has good performance of wear-resistance and heat-proof. It also has the characteristics of light weight, low power consumption, high lifting capacity and long serving life.
2.2 This series has fine insulation structure. The insulation treatments adopt the vacuum drying & glue filling, which has improved the electrical and mechanical performance of the coils .The insulation grade can reach class special C.
2.3 It generally adopts the control mode of constant voltage. It can further improve the lifting capacity if changing to adopt the control mode of over excitation.
2.4 With special structure, it is suitable for working with Excavator.
The magnetic interface also allows for providing a not only easy but also a cost effective way for material handling in open scrap yards through these mobile cranes.
Hzs series concrete batching plant (belt type) is composed of the mixing machine, material weighing system, material conveying system, material storage system, control system and other subsidiary facilities.
Length - 2550 mm
Height - 2950 mm
Capac±ty - 22 m3
Steel sheet width - 4 mm
Total Length - 8450 mm
5th Wheel Heihgt - 1200 mm
Case - BH450 Steel Sheet
Axles and Suspansion: 3x9ton(Local axle),drum brakes, air suspension, front axle lift
Brake System: Knorr I-LVL, RSS (ABS function), 71/320 EWG
Tyres and R±ms Bridgestone 6+1 385/65 R22,5 , steel rims
Hydraulic system: Damper lift is accomplished with P.T.O driven pump and single acting 4 stage telescopic cylinder (180 bar)
Paint: After all the metal materials are sanded and primed, the required color is painted according to the customer's request.
Eaton airflex 14vc1000 equivalent dalin clutch that is ventilated constriction clutch is designed to withstand brake and clutch applications where large inertia loads and sustained slippage would mormally result in loss of torque and reduced operating life.
The torque is transmitted by torque bar, not by the sidewalls of the actuating tube, the tube is loose and contained within the housing which is formed by a rim and two side plates, which are replaceable .The torque bar are held in position by the side plates which cross through the cavities of the aluminus brake shoes.Pressurizing the air tube forces the brake shoe to engage around a cylindrical drum.The release springs in the torque bar cavities of the brake shoes retract the brake shoe when the actuating tube pressure has been released.
Worlds best quality rock breaker chisels itr shanparts
Breaker tools
Itr offers a complete range of breaker tools for various applications. All tools are manufactured from top quality alloy material, machined and heat-treated to achieve excellent mechanical properties for various applications in construction, mining, quarrying and demolition industries
Diaphragms, dampers & seal kits
Made of special rubber for resisting shock and vibration in operation.
Pistons, front heads and back heads
Manufactured with processing methods including cutting, heat treatment and polishing
Through bolts, side bolts & nuts
Manufactured with precision and high tensile strength.
Chisel pins(locks), stop pins
Both round and oval type available for all types of hammers. Manufactured with high grade steel to provide improved strength to tool and front head.
Introducing worlds best Air Preclener From KleanAire
Benefits & Features :
Removes up to 92% of impurities, rain, debris, dust and dirt from intake air before the air - reaches the filter element
Greatly extends filter element life by up to 2-8 times
Reduces engine wear & minimizes costly downtime
Prolongs engine & turbocharger life
Improves fuel economy
Increases engine performance & reduce operating cost
Self powered by the engine's air intake
Virtually requires no maintenance
Treated & powder coated steel housing to endure harshest environments
Works in all weather conditions
Applications :
Construction Equipment
Mining Equipment
Generators
Road Maintenance Equipment
Cement Plants
Air Compressors
Equipment operating in extreme & dusty environments
Agriculture, Farm Equipment
Material Handling Equipment
Dump Trucks
Buses
Logging and Foresty Equipment
For dismantling
Common Piping
Steel shoe(450mm)
Rubber pad
ROPS CAB
Multi lever
A/C
Security key
Side reinforcing cover
Front guard
Head guard
Additional counter weight
Bess PRS-400 Semi-automatic block making machine can produce 4.000 pieces of concrete hollow blocks (20cm width 40cm length 20cm height) or 300 square meters of paving blocks or 1.000 pieces of curbstones. It is just enough to change the mold and the machine can produce 600 different shapes of concrete products.
This machine is designed based on European standards and all the parts used in electrical and hydraulic parts are all well-known .
Contact us for your own special order and special price.
Daily capacity for concrete hollow blocks: 4000 pieces at 8 hours
Daily capacity for paving blocks: 300 m2 / At 8 hours
Daily capacity for curbstones: 1.000 pieces ( 150 x 700 x 300 ) At 8 hours
Required area for installation: 2.500 m2
Installation and operator training course: Free
Warranty period: 2 Years
