Versatitle paver is high grade machine on the basis of international advanced technology which is suitable to pave asphalt and road base material for high grade road, urban road and parking lots etc. It is featured with high automation, easy operation, excellent performance, high efficiency.Js series twin-shaft forced mixing plant with many years of production history in our factory is adopted as main mixing part High-precision, low-fault electronic weighing system is available Computer system with function of mix proportion memory, automatic material dropping compensation, and manual, semi-automatic or automatic control is equipped Multiple combinations of materials loading by loader and belt conveyer are applicable
It is used in road marking. We make as per indian and European standards. 25kg hdpe bags.
Stationary Computerized Asphalt Drum mix Plants up to 120 TPH Fully integrated asphalt plant has been designed, selecting the best configuration which makes the entire system user friendly & hassle-free. Computerized Drum Mix Asphalt plant is available in the following ranges : Roadmac-35 Capacity : 35 to 40 TPH Roadmac-45 Capacity : 40 to 60 TPH Roadmac-50 Capacity : 60 to 90 TPH Roadmac-60 Capacity : 100 to 120 TPH.
Automatic Drum Mix Asphalt Plant for Bituminous Macadam up to 90 TPH Optional: AC variable speed drives can be supplied instead of DC variable speed drives at an extra cost (For all models). Mobile Wet Scrubber unit for pollution control. Special Features: - Easy operation and less maintenance. - Proper drying and homogeneous mixing of aggregate. - Proper Asphalt coating and saving. - Less Fuel consumption. - Accuracy in quality control. - No Erection required. - Sturdy & Specious Structure.
Automatic Drum Mix Asphalt Plant for Premix up to 60 TPH Models Available: Roadmac - 15 [M] cap.-15-20 TPH, Roadmac - 25 [M] Cap.20-25TPH Roadmac - 40 [M] Cap.-35-40 TPH, Roadmac -60 [M] Cap.- 45-60 TPH Optional: AC variable speed drives can be supplied instead of DC variable speed drives at an extra cost (For all models). Mobile Wet Scrubber unit for pollution control.
Stationary Concrete Batching/mixing plants 30 M¦/hr./ 45 M¦/hr.
Asphalt tank of various capacity.
Asphalt drum mix plant Model dm-40 - output capacity 40 - 60 tph Model dm-60 - output capacity 60 - 90 tph Model dm-90 - output capacity 90 - 120 tph 40' container x 4 nos.
Asphalt drum mix plant Asphalt drum mix plant / hot mix plant / asphalt mixing plant is road construction machine used for producing hot mix consisting of aggregates, bitumen and filler material. Offered in different models depending on the output capacities : Model dm-40 output capacity 40 to 60 tph Model dm-60 output capacity 60 to 90 tph Model dm-90 output capacity 90 to 120 tph Asphalt drum mix plant mainly consists of following accessories / components : 1)four bin feeder of appropriate capacity for cold aggregates. Each bin having independent drive. 2)single deck vibratory screen for removal of oversize aggregate. 3)slinger conveyor for feeding cold aggregate into the dryer cum mixing drum. 4)insulated drying cum mixing thermo-drum with auto pressure jet burner. 5)multi-cyclone dust collector capable of removing dust particles. 6)hot conveyor fitted with gob hopper for discharging hot mix onto tipper truck. 7)insulated bitumen tank with conventional direct fired heating arrangement and bitumen pumping station. 8)fuel storage tank 9)mineral filler unit 10)insulated control cabin fitted with air conditioner. 11)control panel with computer and printer. 4 x 40' container
Wet Mix Macadum Plant for achieving homogeneous Mix Material to prepare Sub-base in Road Construction. Wet Mix Plants are offered in different models depending on the output capacities. Model : WMM-100 output capacity 100 TPH Model : WMM-160 output capacity 160 TPH Model : WMM-200 output capacity 200 TPH Wet Mix Plant consists of following accessories / components : Four Bin Feeders of appropriate capacity for aggregates and other ingredients. Each bin having independent drive. 2)Single deck Vibratory Screen for removal of oversize material 3)Collecting conveyor for feeding aggregates and other ingredients to Pug Mill. 4)Pug Mill with appropriate number of paddles for homogenous mixing of aggregates, other ingredients and water. 5)Load out conveyor for conveying mixed material from Pug Mill to Storage Silo. 6)Storage Silo with hydraulically actuated gates for storing mixed material. 7)Water tank and water pump. 8)Control Panel with computer and printer. 9)Control Cabin fitted with air conditioner. 40' container
Mobile asphalt drum mix plant Mobile asphalt drum mix plant / hot mix plant / asphalt mixing plant is road construction machine used for producing hot mix consisting of aggregates, bitumen and filler material. Mobile asphalt drum mix plant mainly consists of following accessories / components : 1)Four bin feeder of appropriate capacity for cold aggregates. 2)Single deck vibratory screen for removal of oversize aggregate. 3)Slinger conveyor for feeding cold aggregate into the dryer cum mixing drum. 4)Insulated drying cum mixing thermo-drum with auto pressure jet burner. 5)Multi-cyclone dust collector capable of removing dust particles. 6)Hot conveyor fitted with gob hopper for discharging hot mix onto tipper truck. 7)Insulated bitumen tank with conventional direct fired heating arrangement and bitumen pumping station. 8)Fuel storage tank 9)Mineral filler unit 10)Insulated control cabin fitted with air conditioner. 11)Control panel with computer and printer. 40' container x 4
Hy-qt10-15 brick making machine Technical parameters Pallet size 1060 * 860 * 25mm (bamboo glue) Molding cycle 12-20 seconds Vibration modetaiwan mode of vibration Vibration frequency 50-100hz Total power36kw Rated pressure 25mpa Dimension (l * w * h) 7200 * 2290 * 2825mm Host weight13.8t
Model: mp200 mp250 Work width: 200mm 250mm Power of engine: 5.5hp(honda) 9hp 5.0hp(robin) Package size(cm): 100*45*110 100*45*110 G.W: 100kg 120kg N.W: 110kg 130kg
This machine not only has the capability of being a hand push marking machine but also has hydraulic pressure drive equipment by itself that enables increased speed of line construction, and results in reduced labor force for working in your projects. It is the best choice for large areas or mountainous regions of highway line marking construction and more advances than hand push marking machines. 1. Auto-moving the direction of forward or turn over, steeples speed regulating 2. Hydraulic pressure drive powerful, speed fast of construction and high efficiency of working. 3. Stable welded profile frame construction, light and agile 4. Safety warning light and night light. 5. Special materials of marking bucket, heat-resistance, anti-cauterization, hard melt alloy grounded knife, active design 6. Same-step sprinkle the bead, convenient construction, adjusted quantity of sprinkle for saving the beads. Engine: HONDA 5.5HP gasoline engine Volume: 1400X820X1040mm Weight: 200Kg (standard with 150mm bucket) Width of thermoplastic bucket: ordinary mode: 150/200/300mm Purchase mode: 100/400/450mm 120/240mm Capacity of coating tank: 100kg Capacity of bead tank: 10kg- Line thickness: 1.0-2.5mm Moving speed: 0-10km/h Max degree of climbing: 15degree Control direction: locked rear wheel, easily and precisely adjust alignment to your exact requirement Heating duel: liquefied petroleum gas (carry the per-gas tank of 10-15kg) Type of sprinkle: screed method
This machine is auxiliary equipment used in road construction activities, used in zebra crossings (pedestrian crossings), arrowhead and line direction of guiding, entrances and exits to a highway. It is a hand pull marker. 1. Bead tank of dismountable frame, convenient cleaning and adjustable. 2. Rise and fall handle design; allow the handle to be adjusted to the operatorsí» desired heights. 3. Integrated thermoplastic bucket and coating tank, advances structure design, it is airproof and does not leak. Hard melt alloy grounded knife. 4. There is a filter screen in the feeding port, which can effectively remove the impurity in paints. 5. six line guide rod easy to observe Volume: 1250X750X1000mm Weight: 145kg Capacity of coating tank: 50kg Line width: 400/450mm Line thickness: 1.5-3.5mm Protruding height: 3-7mm Capacity of bead tank: 20kg
Psx sand-stone-making production line Psx sand-stone-making production line is largely composed of gfp high efficiency deep cavity jaw crusher(or gxpe hyperboloid super fine jaw crusher), pcs high efficiency sand-stone-making machine, hs revolving sand-stone-making machine, yk high efficiency round vibrating screen and xs high efficiency sand-stone-washing machine. This production line represented the highest level for sand stone machinery in china. Four parts of the production line have been respectively awarded the national technological award and important national new product award. Customers speak highly of its advanced performance and excellent efficiency. This production line possesses the following features: 1.Its investment is only 1/2~1/3 that of conventional production line; 2.The cost of ton-sand-stone is only 40~60% that of conventional production line. 3.Highly automatic production. Only 4 workers are needed for the single task.
Technical data: Applicable range:0.5-20l(paint in drum) Height in the drum:7cm to 39cm, Diameter of the drum:7cm to 30cm Revolution speed:60-200r/min Rotation speed:120-400r/min Power supply:750w Net weight:180kg Gross weight:210kg Case size:950(h)f-820(w)f-750(d)mm Packing size:1200(h)f-900(w)f-810(d)mm Feature of kd-30a: Start self-checking program automatically before operation, in case of any abnormality, the controller will activate alarm through digital display and buzzer will sound. Digital display will show the actual time set and time used, so that the operators may have exact mixing time idea for better result. Easy moving or fixing of interior case support. Automatic identifvin size of the drum to offer adequate clamping power and rotating speed. Automatic clamping and open setting;revolution and rotation may start synchronously during paint mixing. Multi-grade intelligent timing inverter, adequate speed control ensures. Net weight:180kg Gross weight:210kg Case size:950(h)f-820(w)f-750(d)mm Packing size:1200(h)f-900(w)f-810(d)mm
Rotaing mixer Technical data: Applicable range:0.5-20l(paint in drum). Height in the drum:7cm to 39cm, diameter of the drum:7cm to 30cm. Revolution speed:130/min Rotation speed:260/min Power supply:750w Net weight:200kg Gross weight:240kg Time set:0-15min Case size:1050(h)f-800(w)f-750(d)mm Packing size: 1150(h)f-900(w)f-850(d)mm Features of kd-40c: Easy moving or fixing of interior case support, save you time and power. Revolution and rotation may start synchronously during paint mixing. The revolution and rotation speed is controlled perfectly to make sure the machine will work steadily. The machine will stop immedietly when open its door, safe and reliable. With aluminium hand sliding door. Net weight:200kg Gross weight:240kg Time set:0-15min Case size:1050(h)f-800(w)f-750(d)mm Packing size: 1150(h)f-900(w)f-850(d)mm
Application: The PCS series high efficiency sand making machine is made by our company on the base of introduction and absorption of the German BHS Corporation technology further to absorb the vertical impact crusherf+s shortcoming and performs to improve, simultaneously synthesized the hammer type, the counter-attack type in broken bits machine strong point comprehensive development has developed the successful newest generation of high efficient sand making machinery, her appearance opened a new era for the Chinese manual sand making domain. Operation principle: High speed collision between materials-high efficiency cleavage crushing (high speed inter-collision between materials, the cleavage takes place at the weakest part). Materials are piled in the crushing cavity, the later coming material shoot at them just like bulletins shooting the target. The high speed inter-collision of materials generates efficient cleavage crushing. The materials loosing kinetic energy will be discharged from the gap of grate shoe. Technical Parameter: Type and spec. Feeding granularity (mm) Electric motorf+s power (KW) Capacity (t/h) PCS40 60-150 45-55 30-40 PCS50 60-200 55-75 40-50 PCS70 60-200 75-90 60-80 PCS100 80-300 0-132 90-110 PCS150 80-300 132-160 120-150 PCS200 100-300 160-20 170-250
Application: The PCX series vertical impact crusher is suitable to crush each kind of hard and crisp materials such as iron ore, copper ore, bullion ore, manganese ore, cement, manual sand making, fluorspar, limestone, steel slag and so on. Especially hard, medium hard and corrosive material. Itf¬s a kind of fine crushing and coarse grinding equipment with high efficiency energy conservation. Features: The structure is simple, the construction cost is cheap; high efficiency energy conservation and the crushing efficiency is high; The ability of through non-crushing material is strong. And this crusher is affected slightly by the material moisture content; the water content may reach to 8%. It may crush hard and super hard material; The operation, maintenance and the installment are convenient; The work noise is low and the dust pollution is slight; The weight is light; the ways of installing are diverse and can be installed transportable-like. Technical Parameter: Type and spec.The max. feeding granularity (mm)Rotate-speed of Impeller (r/m)Electric motorf¬s power (KW)Capacity (t/h)Figure size(mm) PCX-600352000-300022-512-302500f-1600f-2260 PCX-750451500-250045-9025-552780f-1800f-2700 PCX900501200-200090-18055-1003900f-2160f-2770 PCX1050551000-1700150-264100-1604660f-2450f-3660 PCX-125060850-1450264-440160-3005600f-2950f-4000
