china coal0001 P-15B Tunnel Scraper Loader Keyword: scraper loader, tunnel scraper loader Introduction of P-15B Tunnel Scraper Loader P-15B Tunnel Scraper Loader is widely used for small coal mines and mining area of roadway with MGC1.1 fixed box type mine car or skip loading rock, coal rock with suitable height greater than 1.9 meters, the net section is 4.5 meters above the roadway. P-15B Tunnel Scraper Loader also can be used in coal rock or rock roadway, which can be used for drift can also be used on the downhill driving face rock loading, such as adding a tail wheel two, can be carried out on rock tunneling processes between parallel operation in the corners of roadway. P-15B Tunnel Scraper Loader can be used not only in the drift, but also in the angle of less than 30 degrees inclined or turning and turning angle to 90 degrees in the roadway, and for the parallel operation of driving procedures, improve the driving speed. Structural Characteristics of P-15B Tunnel Scraper Loader P-15B Tunnel Scraper Loader has the characteristics of high production efficiency, simple structure, convenient operation and so on. Electrical equipment of P-15B type scraper loader (including motor), button switch, magnetic starter, lights can use flameproof type, can be used in the mine gas and dust in danger. P-15B Tunnel Scraper Loader is mainly composed of a fixed wedge and tail wheel, scraper bucket, transmission (including operating mechanism, trolley, winch), a guide wheel and a trough (feeding groove, groove, middle unload groove) main parts and electrical parts etc. Technical Parameters of P-15B Tunnel Scraper Loader ModelP15B scraper bucket volume (m³)0.15 Production Capacity (m³/h)15-25 Rail Gauge (mm)600 Wire rope pulling force (KN)7.2-10.4 Wire Rope Diameter (mm)12.5 MotorPower (kw)YBB11-4 11KW voltage (V)380/660 Overall size (mm)Length5500 Width1170 Height1800 Weight (kg)2500
P Series Scraper Rock Loader Keyword: scraper loader, scraper bucket loader, scraper rock loader Introduction of P Series Scraper Rock Loader P series rake bucket rocker used in a variety of metal ore, nonmetallic ore, coal mine, railway culverts, water conservancy and other construction projects, can work at the roadway with a tub or skip to rock. It can be used not only in the alley, but also in the inclined angle of less than 30 degrees of the inclined road or turn angle and turn angle of 90 degrees in the use of roadway, also at the same time the parallel operation of the tunneling work to improve the tunneling speed. Electrical equipment with explosion-proof performance, can be used for coal dust and gas in the mine. P-type rake bucket rock loader of the basic parameters: P-15B rake bucket rock loader used in high more than 2 meters (4.5 cross - section) of the roadway. P-30B rake bucket rock loader used in the net height of more than 2 meters (net cross-section above 6 square meters) of the roadway. P-60B rake bucket rock loader used in the net height of more than 2.4 meters (net section above 8 square meters) of the roadway. P-90B rake bucket rock loader used in the net height of more than 3 meters (net cross-section above 12 square meters) of the roadway. P-120B rake bucket rock loader used in the net height of more than 3 meters (net cross-section above 16 square meters) of the roadway. Technical Parameters of P Series Scraper Rock Loader Model P15B (A) P30B(A) P60B P90B P120B P150B scraper bucket volume (m3)0.15 0.3 0.6 0.9 1.2 1.5 Production Capacity (m3/h 15-25 35-5070-10095-140120-180150-220 Rail Gauge (mm) 600 600/900600/900600/900600/900/15001500 Wire rope pulling force (KN)7.2-10.412.3-18.520-2831-5037-5552-72
AGS-40C Rebar Thread Rolling Machine process 14-40mm rebars, thread length grt to 120mm. 1. Roll thread not cut thread, so could protect the highest tensile strength of parent metal. It meets requirements in JGJ107, ACI318, BS8110, DIN1045 and UBC1997 etc. 2. Easy to operate. Automatic opening-closing mechanism for rib peeling device, need only 30 seconds to finish a threaded end. 3. Peel ribs and roll threads by the same machine, so could save labor and improve productivity. 4. Widely used. Be able to process rebar diameter 16-40mm 5. Environment-friendly, safe, no environment and weather restrictions. 6. Economic, low investment for the equipment
Features and advantages of high manganese cone crusher spare and wearing parts bowl liner, concave and mantle mn22cr2, mn18cr2, mn13cr2 1) material: high manganese steel: mn13%, mn14%, mn18%, mn20%, mn24% high chromium iron: cr20, cr24 up carbon steel ht200 qt400-15 2) use: machinery in metal recovery smash, mine, metallurgy, chemical industry, cement, petroleum etc. 3) production quality testing: high frequency infrared carbon & sulfur analyzer, metallographic microscope, machinery performance testing equipment, hardness testing equipment, ultrasonic inspection equipment 4) easy installation: the anti-abrasion block is a semi-permanent part, which is easy for replacement. 5) certificate iso9001:2008 and casting experience over 10years. 6) factory: over 8000square meters and more than 100 workers
DHM spinner hanger shot blasting machine is a machine designed and built as fully integrated blast cleaning system. It provides a cost-effective solution for cleaning, deburring, descaling, decoring, deflashing , sand removal and cast cleaning.
We exports our equipment as it is for Printing Machinery, & Construction Equipment. Ship in Containers.
Machine - 573380 Meter Reading - 773 hours Region - West SouthCentral Asking Price - Make Offer Description - Can pour up to 102in barrier walls, bridge parapet walls and pave up to 20' in straddle configuration 773 hours Tier IV Diesel Engine, Rated at 173 hp (129 kw) at 2400 rpm Latest Generation MFS Control System including Sensors. 3D Ready. â?¢Four Tracks Ten Spool Vibrator Control Hydraulic Frame Widening 48in (1.2 M) Heavy Duty Dual Transfer Augers 45in (1142 mm)Elevation Tubes 2-Speed Hydraulic Drive Motors High Volume Water Wash Out System Triple Grouser Track Pads Standard Machine Pours Right Hand or Left Hand
Capacities at 8/hr fully automatic systems 10,000 or 30,000 bricks sample brick dimensions 250x120x65mm solid or hollow also special order machines and molds
Capacity 8/h 2,000 and 30,000 units Hydraulic manual or fully automatic press machines Press printing power min:50 tons max:600 tons
Daily 8/h capacity 100 to 500 m2 output
Full-automatic or semi auto machinery Concrete hollow block or paving block Daily 8/h capacity 550 to 1200 m2 paving blocks 6500 to 19000 hollow blocks and different set molds
Easy-to-service design mainly for DIY users. Designed for compaction in confined areas of granular soil in narrow trenches. These plates are ideal for curbs, gutters, around tanks, forms, columns, footings, guard railings, drainage ditches, gas and sewer works and building construction. Foldable handle for easy transportation and stock. straight handle is also available Open plate provides self cleaning Complete sealed belt cover to prevent sand and soil in. Built-in wheels for easy transport. Radius base plate for easy access to corners Throttle control for easy holding working speed.(Throttle control is available as optional) Heavy-duty shock mounts reduce vibration to the upper engine and handle.
860 model Single vibrator Total power 3 phase 415v Hydraulic motor 3 h.P 1440 rpm Vibrator mould motor 3 h.P 2880 rpm Travel motor 0.5 h.P 1440 rpm Weight without mould & ram 1000 kg Vibrations 6000 hz amplitude adjustable Operating pressure 140 kg/cm2 Moulding area 860x600 mm Dimensions 2000x1500x2000 mm Production capacity 40-50 strokes/hour 400x100x200 mm 8 block/stroke-2500-3200/sh 400x150x200 mm 5 block/stroke-1600-2000/shift 400x200x200 mm 4 block/stroke-1200-1600/shift
one machine make one slab, low investment simple structure, easy to operate. long working life with easywear spare parts overall dimension:2700x1500x1000 weight:2600kg molding speed:1.3-1.5m/min
We offer a wide range of Machinery Spare Parts at industry leading prices. These Machinery Spare Parts include fork lift gears that are known for the resistance against wear and tear, rigidity, low maintenance and durability. Available in different sizes and dimensions, these Machinery Spare Parts can be customized as per the requirements of the clients.
Basic info. Model no.: 1u3252\1u3252-a\1u3252v\1u3252syl Export markets: global Additional info. Trademark: t Packing: wooden carton or iron carton Standard: popular Origin: ningbo, china Hs code: 84314990 Production capacity: 1800 tons/month Product description Cat 1u3252 bucket teeth (cat311/312) As a leading oem lost wax casting parts manufacturer, ningbo tuoxing precision casting co., ltd mainly provides ground engaging tools for the construction and mining industries and commercial casting for various heavy industries. We carries a complete line of ground engaging tools, including bucket teeth and adapters, cutting edges, side cutters, end bits, ripper shanks, shank guards and scarifies shanks, etc. Our extensive g. E. T covers: caterpillar, komatsu, hitachi, kobelco, jcb, hyundai, daewoo, case, volvo, hensley, h&l, bobcat, liebher, kawasaki, fiat, bofors, etc. Wooden/iron case
Basic Info. Model NO.: 1U3202TL Additional Info. Trademark: TX, HM Packing: Wooden Carton or Iron Carton Standard: Popular Origin: Ningbo, China HS Code: 84314990 Production Capacity: 1800 Tons/Month Product Description 1U3202TL FOR CAT 416, 426, 428, 910, 916, 920, 926, 933. (J200, J225) As a leading OEM lost wax casting parts manufacturer, Ningbo Tuoxing Precision Casting Co., Ltd mainly provides Ground Engaging Tools for the construction and Mining industries and commercial casting for various heavy industries. We carries a complete line of Ground Engaging Tools, including bucket teeth and adapters, cutting edges, side cutters, end bits, ripper shanks, shank guards and scarifies shanks, etc. Material Impact Hardness(HRC) Grade 1 Carbon Steel 20¡ã C ¡Ý 17J 47-52 -40¡ã C ¡Ý 17J Grade 2 Alloy steel 20¡ã C ¡Ý 20J 47-52 -40¡ã C ¡Ý 14J Grade 3 Special alloy 20¡ã C ¡Ý 22J 47-52 wooden/iron case
Basic info. Model no.: cat330 Additional info. Trademark: t Packing: wooden cases Standard: e330 Origin: china Hs code: 84314990 Production capacity: 12000 tons/year Product description 1. Have two manufactories to produce excavator bucket teeth 2. Passed iso: 9001-2000 3. Wax and send casting 4. Excavator bucket teeth: Caterpillar: 305, 311, 312, 315, e200b, 320, 322, 325, 330, 345, 350, 365 etc. Komatsu: pc60, pc100, pc120a, pc120, pc200, pc300, pc400, pc6501, d85 etc. Sk: sk200. Sk210, sk230, sk320, sk350 etc. Hitachi: ex55, ex70, ex120, ex200, ex210, ex350 etc. Daewoo: dh55, 60, 135, 150, 220, 280, 290, 300, 320, 360, 420, 400 etc, Hyundai: r200, 130, 220, 420, 450l 280, 130, 60 Jcb: 531-03205, 531-03208, 531-03209, 332c-4388, 531-03208sb, etc. Case: 580 Volvo: 140, 210, 290, 360, 460, 50, 140 etc Liugong: 40, 50 Esco: 22, 25, 35, 66, Bobcat, hensey, bofors, fai, etc. Wooden/iron case
Basic Info. Model NO.: Bucket Teeth (4K6936) Additional Info. Trademark: TX or HM Packing: wooden carton or iron carton Origin: Ningbo, China HS Code: 84314990 Production Capacity: 1200 tons per month wooden/iron case
Basic info. Model no.: cat225 215 230 325 330 e200/3g8354 Export markets: global Additional info. Trademark: t Packing: wooden carton or iron carton Standard: 3g8354 cat225 (cat225 215 230 325 330 e200) Origin: ningbo, p. R. China Hs code: 84314990 Production capacity: 1800 tons per month Product description 3g8354 cat225 (cat225 215 230 325 330 e200) As a leading oem manufacturer of ground engaging tools for the construction and mining industries and commercial casting for various heavy industries. We have been manufacturing and marketing ground engaging tools, and specializing investment castings since 2003 We mainly produce bucket teeth, bucket adapters, cutting edges, tips, side cutters, end bits, ripper shanks, shanks guards, scarifies shanks, etc. All g. E. T. Can be assembled in machines like: caterpillar, komatsu, hitachi, kobleco, jcb, hyundai, daewoo, case, volvo, hensley, h&l, bobcat, liebherr, kawasaki, fiat, bofors. Our capacity is 1800 tons per month, having iso9001/ts16949: 2009 certificates. More info., pls contact me and aks our catalogue. Impact hardness hrc Carbon steel 20 ¡ã ¡ý 17j 47-52 -40 ¡ã ¡ý 11j Alloy steel 20 ¡ã ¡ý 20j 47-52 -40 ¡ã ¡ý 14j Special alloy 20 ¡ã ¡ý 22j 47-52 Wooden/iron case
