Find Verified Computers Electronics Communications Electrical Suppliers, Manufacturers and Wholesalers

MNS Type Low Voltage Draw-out Switch Cabinet
MNS Type Low Voltage Draw-out Switch Cabinet
Product Introduction
MNS type low voltage draw-out switch cabinet ( hereinafter called switch cabinet) is designed and developed by ourselves, combining with the status of domestic low voltage switchgear. It belongs to new generation of drawer type switch cabinet. Novel structure, compact and reasonable layout, advanced and reasonable component modeling, meet the needs of electric system with AC50-60HZ, 4000A rated current and 660V rated voltage or less, as a controlling equipment of power generation, transport, distribution and change. Thus, switch cabinet is widely used in power plants, substations , factories, mines, petroleum, chemical, high-rise buildings and other power distribution sites.

Product features
The main frame is molded by pressing C-type aluminum-zinc sheet metal forming, is whole assembly structure. Structure is compact, can operate on the positive side, also can be on the opposite side, protective level of casing is IP3X.
Each function chamber is isolated from each other, divided into function unit chamber, bus-bar chamber and cable chamber. The role of each chamber is relatively independent.
Horizontal main bus-bar adopts laid flat after cabinet â?�arrangement method, to enhance the ability of bus-bars anti-electric, then aid the main power lines gain the capability of bearing high short-circuit strength.
Drawers can be designed to 1/4 1/22 3, these five standard drawer unit, drawer unit is equipped with mechanical interlock devices. Use high-strength flame- retardant engineering plastics to form, with high security.
Switch cabinet has two outlet types: right outlet and rear outlet
Dont need special complicated tools, easy to install

GGD Type AC Low Voltage Distribution Cabinet
GGD type AC low voltage distribution cabinet
Product Introduction
Introduction and usage
GGD type AC low voltage distribution cabinet is suitable for power plants, substations,factories,mine enterprises whose distribution system is with 50HZ AC,to 3150A rated working current, used for power change,distribution and control of power, lighting and power distribution equipments.
GGD AC low voltage distribution cabinet is a kind of new type low-voltage distribution cabinet, designed based on the requirements of the Department of Energy in charge  of the higher level, the majority of electricity users and design department, and with principles of safe, economic, rational and reliable. It is with these characteristics of high breaking capacity, good dynamic thermal stability, flexible electrical program, convenient combination methods, series, practical, novel structure, high level of protection, can be treated as a replacement product of low voltage switchgear assemblies.
GGD type AC low voltage distribution cabinet meets the standard of IEC43Low-voltage switchgear and control gear, GB7251Low-voltage switchgear assembliesOperational conditions
1, surrounding air temperature not more than +40°C, not less than -5°C, average temperature over 24hs cannot more than +35°C
2, installed in indoor, altitude not higher than 2000m
3, surrounding air relative humidity at the highest temperature of + 40 not more than 50%, at a lower temperature allows a greater relatively humidity( for example, temperature is + 20 , humidity can be 90%), should consider the influence of condensation caused occasionally due to the temperature change.
4,the inclination between cabinet and vertical plane not exceed 5%
5, cabinet need be installed in the place without severe vibration and shock and where is insufficient to corrode electrical components.
6,users can consult with manufacturers if have special request.

Casing of Transformer
Casing of Transformer
Product Introduction
It is not necessary for general dry-type transformer to equip casing, means the protective degree is IP00, if need to be equipped with casing, protective degree is IP20, Casing is constituted by a safety shield to prevent accidental electrocution. Under the conditionof having dripping water, the transformer can be equipped with casing of that protective level is IP23. According to users  special requirements, we can provide casing with IP54 protective level.
Temperature Controlling and Cooling Devices
Temperature controlling device

Transformer adopts BWDK temperature controlling device, temperature measuring component is in the top of low voltage winding that can detect automatically and cyclically display working temperature of three-phase winding. When the temperature of winding reaches setting value , thermometer can automatically start the fan, stop the fan, signal transfer output, tripping output, etc.
Air cooling device
Transformer is equipped with dedicated Axial flow cooling fan, transformers capacity can be increased by 40%, even more under the condition of forced- air cooling.

Dedicated Accessories of Box-type Transformer Substation (USA type)
Product Introduction
Dedicated Accessories of Box-type Transformer Substation (USA type) include L.V outlet duct,Insulation operational pole,H.V. Brushing,Plug-in fuse core,Fully insulation brushing accessories,H.V. load switch,Pressure release valve,Charged displayer and so on.
Our technology is strong , manufacture process is advanced, equipments are excellent and testing modes are complete. Meanwhile, we have a professional team that everyone has sense of responsibility, exploiting and innovating. We have advanced design concepts , we can grasp the pulse in the design filed of the transformer exactly and form unique thinking of special design, manufacturing and market development. We also have passed ISO9001 quality management system ,ISO14001 environment management system and PCCC certification. Our products performances are superior to national standards and IEC standards. We have got the approval of National Transformer Quality Supervision and Inspection Center.

Newest design aluminum shell waterproof for outdoor, pool, stage, weddings.
Voltage: AC 90-240v, 50/60Hz
Power consumption: 126
Lighting Source:7pcs18w led 6 IN 1
Color:RGBWAUV 6IN1
Control :DMX, master slave, sound actived, auto mode
Channel: 5/9CH
Beam angle15-45°(optional)
Display:digital screen
N.W.:4.5kg
G.W.:5kg

Large air volume & super quiet;
Easy installation, Application: Ventilation for hotels, shopping malls, places of entertainment and buildings.
Totally enclosed metal fan body: fan body, high quality galvanized plate; anticorrosive and fireproof; cabinet structure, totally enclosed & with water-proof terminal box inside; excellent security. Impeller, high quality galvanized plate; firm in sructure & stable in operation.
High efficient motor: high quality ball bearing, with resetable temperature protector; longer service life, 3 times longer than of oil-retaining bearing motor.

GDF series centrifugal fan is widely used for ventilation in enterprises, civil buildings, hotels, stores, hospitals, theaters, halls, colleges and research institutes.
Environmental temperature range-----20°C~80 °c
Particles contain in the air shall not exceed 120mg/m
The air transferred shall not contain any toxic, corrosive and adhesive materials
Rectangular Duct Ventilation Fan
Strong body, durable
Supper strong structure design with the single bearing outer rotor motor
Sirocco front forward impeller design, high pressure, large air volume
Eversion motor installation design, easy to maintain.

DPT series large air volume ventilation fan is widely used to place like hospital, hotel, living room, office, store, and etc for ventilation.
Thin: can be installed on the ceiling, save space.
Structure: Strong aluminum alloy fram.
Motor: Three phase outer rotor motor, low noise, long life, high ecfficency.

High Efficiency High Pressure Long-range Air Supply, Circular fan body, directhly connected with duct, easy for installation., Backward impeller with outer rotor motor, high pressure, high efficiency., Invisible construction, give you a fresh and beautify life.

1. high brightness&long life of 4 in 1 RGBA or RGBW,5 in 1 RGBAW and 6 in 1 RGBAW UV LED can mixing with more than 16.5 million colors
2. Power supply is suit for 90v-240v,Stable quality and suit for all world.
3. high quality strong aluminum alloy hous
Voltage: AC 90-240v, 50/60Hz
Power consumption: 105
Lighting Source: 12pcs15w led 5IN1
Color: RGBWA 5IN1
Control DMX, master slave, sound actived, auto mode
Channel: 5/9CH
Beam angle: 15-45°(optional)
Display: digital screen
N.W.: 4.5kg
G.W.: 5kg

Durable Led Par Light for outdoor.
Perfect color mixing, Dimming flicker-free, and excellent heat dissipation.
Voltage:AC 90-240v, 50/60Hz
Power consumption:252
Lighting Source:14pcsÃ?18w led 6 IN 1
Color:RGBWAP(UV) 6 IN 1
Control:DMX, master slave, sound actived, auto mode
Channel:6/10CH
Beam angle:25-45 degree(optional)
Display:digital screen
N.W.:4.5kg
G.W.:6kg

18 pieces led par light
hot sell why it has:
1. New Quad-color LED technology
2. 18 x 4IN1 RGBW LED multichip
3. Superior color mixing
4. No multi-color shadows
5. Extremely bright beam
6. 25°beam angle
7. Aluminium housing
Product Model:GA-P1818A
Voltage:AC90-240V
Frequency:50-60Hz
Brand:GAGA LIGHT
LED POWER:18w
LED QTY:18pcs
LED Color:RGBWAP 6IN1
Max.power consumption:450W
LED Life Time:100000 hours
Control System :DMX512/ Master-slave/Sound activated/ auto mod
Control Channels:6/10CH
LED angle:25 or 45 optional
Environment Temperature:-10°~ 40
Light body:aluminum case
Display :Digital Screen
IP Grade:IP54
Net Weight:3.5kg
Gross Weight:4.5kg
LED Par Light

Lamp details: White shell, PS LGP, SMD4014, PF>0.9, RA>80, lumen>80lm/W.

Resin insulation dry type transformer (scb)
Dry type transformer
Our company dry type transformer is made of epoxy resin and adopts foreign advanced technology and cad design.  the core is manufactured with high quality cold rolled grain-oriented silicon steel and steps overlapping structure is also adopted for the core design, thus to greatly reduce no-load loss.  winding is manufactured with high quality epoxy resin, coil casting process is completed by automatic vacuum casting equipments. The epoxy resin is with characteristics of good penetrability and no bubbles, so its partial discharging volume is small. Dry-type transformers with advantages of strong overload ability, good thermal stability, small size, light weight, easy to install, exemption from maintenance can be widely used in high-rise buildings, commercial centers, airports, railway stations, docks, subways, factories and underground distribution stations.

tem

Specification

module

Led type

SMD 3 IN 1

Pixel pitch (mm)

2

Module resolution (W X H)

100150

Module dimension(mm)

200(W)300(H)

Module weight(kg)

0.4

Module power consumption(W)

50

cabinet

Module quantity(WH)

21

Cabinet resolution(WH)

200150

Cabinet dimension(mm)

400(W)300(H)66(D)

Cabinet area(m2)

0.12

Cabinet weight(kg)

4.6

Pixel density(dot/m2)

250000

Cabinet flatness(mm)

0.2

Maintenance

Back Access

Cabinet material

Die-casting Aluminum

Optical parameters

Single-point brightness correction

available

Single-point color correction

available

Brightness(nits)

1000(color temperature 6500K)

Color temperature(K)

3200,9300 adjustable

Viewing angle (Horizontal/Vertical)

160./160.

Luminous point center distance deviation

A device has been pulled from service and contains one tadiran tl-4920/s, 3.6 volt 8500mah c lithium battery. The device was designed for a 20year life and have been pulled from the field within the first 0-3 years. Two styles exsist: battery encased in plastic or gel. Samples available. Estimate +250,000 available over next 1.5 years.

-

Eastern Sports Industrial Co.,Ltd supply truss&stage,pipe and drape,cable ramp, crowd barrier etc, if you are interested in our products, please feel free to contact me.

It is available for medium live concerts, tv studios, road shows, mobile dj, clubs, stage performance, party, event, wedding and so on.
The output of different brightness, can produce more than 1600 thousand colors.
Power supply: ac100-240v, 50-60hz
Power consumption: 162w
Light source: 54*3w high brightness rgbw leds (r12, g18, b18, w6)
Color: 16.7 million kinds of color change
Protection grade: ip33
Led life: 10 million hours
Beam angle: 15°-45°(alternative)
Control channels: 8chs
Control mode: dmx512 , master-slave,  auto-movement, sound
Dimming: 0-100% linear dimming
Strobe:1-20 times/sec
Materialengineering : plastic shell, light weight, durable
Dimension: 220*220*230mm
N.W: 2.5kg
G.W: 3.5kg(1pcs),  15kg(4pcs), 23kg(6pcs)
Packing size: 26*26*37 cm(1pcs) , 55*55*41cm(4pcs) , 81*55*41cm(6pcs)

Gaga 24*18w indoor led par light which international standard dmx 512 signal is requested.
The built-in program includes dimmer, strobe, gradually change, fading, sound activation and so on.
Product model: ga-lp2418
Voltage: ac90-240v
Frequency: 50-60hz
Brand: gaga light
Led power: 18w
Led qty: 24pcs
Led color: rgbwap 6in1
Max.Power consumption: 450w
Led life time: 100000 hours
Control system: dmx512/ master-slave/sound activated/ auto mod
Control channels: 6/10ch
Led angle: 25 or 45 optional
Environment temperature: -10~ 40
Light body: aluminum case
Display: digital screen
Ip grade: ip54
Net weight: 3.5kg
Gross weight: 4.5kg

1. Finish: good polished, flat head, diamond point, hot-galvanized/electro-galvanized, smooth shank
2. Materials: high quality low carbon steel q195 or q215 or q235
3. The length: 1/2''- 10''
4.The diameter: bwg4- bwg20
5. Packing:
1)20-30kg/carton, or inside have the small boxes or bags.
2)25kg ( in bulk)
3) in according to the customer requirement
Features
1.Performance: ductile bending , the surface after polishing and electroplating, strong resistance to corrosion
Resistance, rust resistance.
2. Strength: about 500 ~ 1300 mpa
3.The production process: with high quality wire rod wire drawing , the thickness of wire rod is 9.52mm88.90mm
4.Product features: flat cap, round bar, diamond, pointed strong, smooth surface, rust.
5.Product usage : the product is suitable for hard and soft wood, bamboo pieces, ordinary plastic, wall foundry,
Repairing furniture, packaging etc.Widely used in construction

Packaging details:
20-30kg/carton, or inside have the small boxes or bags
In according to the customer requirement