Features: 1. Material: Alloy Steel, Carbon Steel, Stainless Steel, , Cast Iron, Aluminum, Copper, Brass and so on 2. Heat Treatment: Hardening and Tempering, High Frequency Quenching, Carburizing Quenching and so on. 3. Surface Treatment: Galvanizing/Zinc Plating, chrome plated, Black oxide Treatment, Spray Paint, Mirror Finish, Sand-blasting and so on according to ROHS demand. 4. Inspection: All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product enter into the market. 5. Durable, bad condition Resistance Our sprocket models for your reference: 1)Short/single pitch sprocket: *Chain matched:35 (06C) Teeth:from 9-120 *Chain matched:40 (08A) Teeth:from 9-120 *Chain matched:50(10A) Teeth:from 9-120 *Chain matched:60 (12A) Teeth:from 9-120 *Chain matched:80 (16A) Teeth:from 9-120 *Chain matched:100 (20A) Teeth:from 9-120 *Chain matched:120 (24A) Teeth:from 9-120 *Chain matched:140(28A) Teeth:from 9-120 *Chain matched:160 (32A) Teeth:from 9-120 *Chain matched:180 (36A) Teeth:from 9-120 *Chain matched:200 (40A) Teeth:from 9-120 2)Double pitch sprocket: *P=25.4mm Teeth:from 7-100 *P=31.8mm Teeth:from 7-100 *P=38.1mm Teeth:from 7-100 *P=50.8mm Teeth:from 7-100 *P=63.5mm Teeth:from 7-100 Packing: Little quantity (Samples ) Carton More quantity: Wooden case Delivery time: standard size  within 10 days.                custom-made size within 15 days. ServiceOEM/ODM
Product details Product Specification Measures from 0-9990ppm Accuracy:+-2%, Battery: 2x1.5V(Button Cell) Size:155x31x23mm(6.1X1.2x0.9in) Use the TDS Meter to: Check the performance of your water filter Check for the hardness (1 grain=17ppm) Make sure you always drink pure water. Features Hold function saves the measurements for convenient reading and recording. Auto-off function:turns off meter after 10 minutes of non-use to conserve batteries. Dual Range: Measures from 0-999ppm,with a resolution of 1 ppm. From 1000 to 9990ppm,the resolution is 10ppm, indicated by drinking x 10 symbol,Factory calibrated. Advantages: Taking Temperature Measurement 1.Once the meter is on,the temperature function can be used at any time, in or out of liquid. 2.Press the TEMP button.The display will switch to temperature(in Celsius only). 3.To return to TDS mode,press the TEMP button. Precaution and notes Do not drop the entire TDS meter in water or dip beyond the maximum immersion level.This unit is not covered under the warranty if water enters the unit. 2. Do not store the TDS meter under high temperature or direct sunlight.This will shorten the life-span of the product and potentially avoid the warranty. 3. The TDS-3 meter is calibrated at 642ppm. It is recommended that the calibration level should be the similar to the sample to be tested.If you are testing higher ppm(member,water quality association). Calibration Your meter has been factory calibrated well. warranty 1.Three year warranty: The product is warranted to the purchaser against material and workmanship for three(3) years from date of purchase. What is covered: Parts and labor , or replacement at the companyâ??s option. Transportation charges to the purchaser. What is not covered: Transportation charges to the company. Damages from the abuse or improper maintenance (see operating instructions and precautions). Any other consequential damages, incidental damages ,or incidental expenses,including damages to the property.Some states do not allow exclusive or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. FAQ Question 1: What is the MOQ of this item ? Answer: The item MOQ is 5000pcs. Question 2: How to pack this item? Answer: Box packing is our usual practice, you can also send us your packing design, and we can packing as your requirement. Question 3: How to make payment? Answer: You can make payment by T/T,Paypal.Western Union and of course cash face to face at our factory. Question 4: What is the lead time? Answer: Our lead time is within 10 days after receive your payment based on MOQ:5000PCS. Question 5: Can you accept OEM & ODM? Answer: Yes, we can accept OEM &ODM -
Digital Electronic Tension Meter (DTM-501) for Yarn Copper Wire Fibre DTM Series Digital Tension Meter Tension measuring 128 * 64 LCD display, late-model design, comfor table handfeel , easy operation, measure the value of direct display tension, maximum, minimum, and can store records of measurements to determine the quality control of the actual tension values. It can be widely used in wire, strip processing time of tension measurements (such as: yarn, steel wire, copper wire, copper strip, tape, film, fiber-optic cable, carbon fiber lines, etc.).
Digital Electronic Tension Meter (DTM-501) for Yarn Copper Wire Fibre DTM Series Digital Tension Meter Tension measuring 128 * 64 LCD display, late-model design, comfor table handfeel , easy operation, measure the value of direct display tension, maximum, minimum, and can store records of measurements to determine the quality control of the actual tension values. It can be widely used in wire, strip processing time of tension measurements (such as: yarn, steel wire, copper wire, copper strip, tape, film, fiber-optic cable, carbon fiber lines, etc.).
(TL-101) Digital manometer measures gauge/differential pressure from -55H2O to +55H2O(2 psi) It features 11 selectable units of measure: in H2O, pis, bar,mbar,Kpa,inHg,mmHg,ozin2,ftH2O,kgcm, additional features include data hold and auto power off disabled,careful use of this meter will provide years of reliable service. Features: 1.Max / minimum / average, and with a relative time 2.Large LCD backlit dual display 3.Zeroing, offset, and data compensation 4.Low battery display and automatic shutdown 5.Data Hold and Error code 6.9Vbattery 7.Client can calibrate the meter by oneself Specifications: 1.Pressure Range:+/-5psi(TL-101) 2.Accuracy:+0.3% FSO (at 25oC) 3.Repeatability: +0.2% (Max+0.5%FSO) 4.Linearity/Hysteresis:+0.29% FSO 5.Response Time:0.5Seconds Typical 6.Over Range Indicator:Hi 7.Under Range Indicator:Lo 8.Operating Conditions:0 to 50oC(32 to 122oF) 9.Storage Conditions:-10 to 60oC (14 to 140oF) 10.11 Selectable units of Measure 11.Max / minimum / average, and with a relative time 12.Large LCD backlit dual display 13.Zeroing, offset, and data compensation 14.Low battery display and automatic shutdown 15.Data Hold and Error code 16.9Vbattery 17.Client can calibrate the meter by oneself OEM is acceptable CE and ROHS are approved Lowest shipping cost could be provided 53X31X36CM/carton 37pcs/carton 10KGS/carton
Features: 1.Light,temperature and humdity measurement 2.Lux and Fc unit switchable 3.Celsius and Fahrenheit switchable 4.Auto range 5.Large LCD with Backlight 6.Data Hold Function 7.Min/Max/Avg Function 8.Detachable Sensor 9.Low Power Consumption Specifications: Light measure range: 0.1 to 200,000 Lux(Fc switchable) Accuracy:¡¨¤4%(0.1 to 10,000Lux);¡¨¤10% above 10,000Lux Resolution:1 Lux/0.1FC Sampling:0.5sec Temperature range:-10~50oC(14 to 122oF) Accuracy:¡¨¤1oC/¡¨¤1oF Humidity range:20%~90%RH Accuracy:¡¨¤5% Operation temperature:0 to 50oC(32 to 122oF) Operation humidity:10 to 90%RH Storage temperature: -10 to 60oC(14 to 140oF) Storage humidity:10 to 75%RH Size:220*55*35mm Weight:220g(included 9V battery) 53X31X36CM/CARTON 30PCS/CARTON 10.72kgs/CARTON
LPC-06C slip ring Description: The LPC-06C slip ring capsule is a standard, off-the-shelf unit that uses gold contacts at the rotary interface. Color-coded lead wires are used on both the stator and rotor for simplifying electrical connections. Using a 90 V-groove ring design for each ring, the LPC-06C slip rings provide smoother running, lower torque and lower electrical noise than competitive slip rings. It is available in1- 6circuitmodels. Features: 6 circuits models 2 amps percircuit,240 VAC/DC. Precision ball bearings meet or exceed life requirements for most commercial applications Speed up to 300 rpm continuous Gold-gold contacts Compatible with data bus protocols Sealed units are available Flexible, color-coded, silver-plated lead wires Transfer analog and digital signals Also available with 5 and 10 amps power rings combined with 2 amps rings. Standard packing .Or according to customer's demand.
Mobiles and electronic items.
Used consumer electronics, such as used phones .
Small domestic appliances, major domestic appliances, consumer electronics, televisions, power tools, building materials..
Computer hardwares, mp3 , all kinds of memory cards, usb , electronics parts, any tihngs you want from asia such as hongkong china taiwan korea Japan.Can work as your buying office in hongkong
Eddy Current Displacement Transducer Sensor NEW AND ORIGINAL PACKAGE WITH ONE YEAR WARRANTY Item NO.: EPRO PR6480/031-000 Order(MOQ): 1 Payment: T/T Price Range: 1 - 5 Color: Depends on material
full range of products, including Operational Amplifiers & Comparators, Power Management, Audio & Video ICs, Communication ICs & RF Devices, Optoelectronic Devices, AFE (Analog Front End),Other semiconductor ICs, Analog Master Slice, MUSES,SAW Filter, MEMS Transducer, Satellite Communications, Sensors, Marine Radars ,Weather Air Traffic Control Radars, Linacs, etc. Close cooperation with our manufacturers Collaborating with well known manufactures such as Semiconductor and Semiconductor Pricing in line with the market Quick and on time delivery Competent counselling and support Professional order processing along with high product availability
Electronic scrap, electronic waste, computer motherboards, laptops, mobile phones, ECU, car radio boxes, household electronics, servers, CPU, telecommunications, HDD, RAM, TV boards, LCD..
Product description 120KV 10ma DC Cable Test System is an important equipment for DC voltage withstand test and leakage current test of HV electrical equipments, cables, surge arresters in electriv industry and power supply departments. 120KV 10ma DC Cable Test System is developed based on the calibration made by National HV Meterage Station, it accords with the standard "Generation Requirement of Portable HVDC Generator"(ZGF 24003-90) Technique Index 1. power: AC220V+10%, 50Hz+1% 2. Output voltage indicator accuracy:
GPS tracker and wireless communications equipment.Global distribution, manufacturer
NVIDIA CUDA Cores, 10240 ; Boost Clock, 1.67 GHz ; Memory Size, 12 GB ; Memory Type, GDDR6X
The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
The Polarization Maintainiing Coupler Module has low insertion loss and polarization-dependent loss, miniature size, wide operating wavelength and temperature range, super reliability and excellent channel uniformity.
600kg 220V/110V 280W including mounting plate (Price including control board SL1894 and 2 pcs transmitter T3501) Spring limit /Magnetic limit
