Inkjet printer Carton
Imaje-filter S4/S8/9040-Main Filter:ENM5934/37176 Imaje-filter S7/9020/9030-Main Filter: A35532 Imaje S8-Filter for White Ink(contrust) : A35185/A37337 Imaje 14» filternet : ENM17673 Imaje 32» filternet : ENM17674 Imaje-14u pre-pump filter : ENM34410.
Ink cartridge Carton
Inkjet ink printer.
A6 Ultra small size rack mount printer Very silent printing thru direct thermal printing method Support 3.3v low voltage system Serial(rs-232c, ttl) interface/parallel interface Support ascii half-angle letter library Abundant figure/curves/characters print function Copy function of lcd screen Easier paper loading Item Specification Printing method Direct thermal line printing Paper loading way Easy paper loading Paper width 57 mm Print width 48 mm Resolution ration 8 dots/mm(384 dots/line) Life of printing head 6+106 character lines Printing speed 30mm/sec (when the utilization rate is 25%) Character size 6x8dots, 8x16dots, or12x24dots Chinese character library Gb2312, 16x16dots, or24x24dots Outline dimension(wxhxd mm) 85mmx85mmx50/37mm Installation dimension(wxh mm) 80mmx80mm Inlaid deepness 48mm Paper supplied Thermal roll paper (57mm wide, 30mm°) Interface Serial(rs-232c , ttl)/parallel interface Input power Dc 3.5v-9v, 15w/ dc 5v, 3a, max 4a Operating temperature 5¦c ~ 50¦c Storage temperature -20¦c ~ 60¦c Operating humidity 10¦c ~ 80¦c Storage humidity 10¦c ~ 90¦c
A9 Very silent printing thru direct thermal printing method High speed (50mm/sec, based on character ratio 25%) High speed and low power consumption option Support 3.3v low voltage system Support 3.5v-9v power (best performance when 7.2-8.5v) Serial(rs-232c , ttl) interface/parallel interface Abundant figure/curves/characters print function Easier paper loading Itemspecification Printing methoddirect thermal line printing Paper out detectionpaper end sensors function Paper loading wayeasy paper loading Paper width57 mm Print width48 mm Resolution ration8 dots/mm(384 dots/line) Life of printing head6+106 character lines Printing speed50mm/sec (when the character ratio is 25%) Character 6x8dots , 8x16dots, or12x24dots Chinese character librarygb2312, 16x16dots, or24x24dots Outline dimension(wxhxd mm)84mmx98mmx57mm Installation dimension(wxh mm)78mmx92mm Inlaid deepness54mm Paper suppliedthermal roll paper (57mm wide, 50mm°) Interfaceserial(rs-232c , ttl)/parallel interface Input powerdc 3.5v-9v, 15w/ dc 5v, 3a Operating temperature5¦c ~ 50¦c Storage temperature-20¦c ~ 60¦c Operating humidity10¦c ~ 80¦c Storage humidity10¦c ~ 90¦c
T3pos Stylish and elegant appearance Support printing dot map of different density and loaded map. Paper end sensors and paper nearly end sensors function Add two cashbox driver signals Printer head overheat protect function Abundant figure/curves/characters/barcode print function Easy to use and simple to maintain Easier paper loading Itemspecification Printing methoddirect thermal line printing Cashboxtwo cashbox driver signals Paper out detectionpaper end sensors and paper nearly end sensors function Paper loading wayeasy paper loading Paper width57 mm Print width48 mm Resolution ration8 dots/mm(384 dots/line) Life of printing head6+106 character lines Printing speed40mm/sec Character 6x8dots , 12x24dots Chinese character librarygbk, 24x24dots Outline dimension(wxhxd mm)116mmx184.5mmx92mm Paper suppliedthermal roll paper (57mm wide, 60mm°) Interfaceserial (rs-232c, ttl) /parallel interface / usb interface Input powerdc 12v-24v , 25w Operating temperature5¦c ~ 50¦c Storage temperature-20¦c ~ 60¦c Operating humidity10¦c ~ 80¦c Storage humidity10¦c ~ 90¦c
Printing Resolution DPIú¦ 200 DPI Height of Characterú¦Print height range is 1mmí½18mm. Automatic Printing: Date, time, lot No, Shift No, Sequence No. etc. Message Memoryú¦ Save up to 100 messages and 100 symbols Texts Lengthú¦Max. 200 characters per message Sequence No: 1-9 variable numbers Printing Speed: Maximum 35 meters /minute and the speed isní»t influenced when printing more lines. Auto voltage selectionú¦AC 110- 220V Energy Consumptionú¦Average lower than 100W Operation Temperatureú¦1íµ-37íµú+Humidity 30% - 70% . Packaging size 66x43x 31cm G.W:. 15KG.
Width of Spray Head: 18mm Best printing Distance: The distance between the spray head and printing objects should be 5-10mm Printing Direction: The spray head can be adjusted 0-180íp vertical downward or vertical updward, from left to right horizontally Automatic Printing: Date, time, lot No, Shift No, Sequence No etc. Message Memoryú¦ Limitless memory space for messages Text Lengthú¦Max. 250 characters. Sequence No: 1-9 variable numbers Printing Speed: Maximum 35 meters /minute and the speed isn't influenced when printing more lines. Dimensionú¦34.7x22.4x 11.5cm 12 KGS.
High Resolution/piezo ceramic printing method Stand-alone Print up to 15 lines Letter Height up to 18mm English &Chinese language Size:34.7x22x 10cm G.W:. 15KG
Feature -Compact design and fast installation -Easy to be integrated at any position of the production line -Original design, small size and lightweight, equipped with a small table or mounting bracket with the use of production line -More further environmental protection and energy saving -Un-contact processing, more environmental protection, lower power, fast laser marked -Easy to use and Excellent compatibility -Simplicity of operation, easy to use, powerful anti-jamming performance, enough memory, multiply input and output interface, use with automatically anti-counterfeit and anti-disorder system -Adopt import laser, more safer and faster Applications Food, beverage, tobacco, electronic component, pharmaceuticals, ceramic wares, automobile part, electrical wire, cable, arts and crafts, rubber 1) Refrigerate Style: Air-cooled, Water-cooled 2) Wave length: 10.6mm 3) Line Width: 0.02mm 4) Depth: 0.04mm (up to the material) 5) Industrial Controller: Industrial control computer 6) Print Content: Character, logo, barcode, two-dimension code, image, graphics, DOT mosaic 7) Operating Range: Embedded many kinds of laser marked font, automatically serial number, Can be static and dynamic operation, automatic input with time and date change 8) Information Input: Keyboard, USB, serial data communication 9) Interface: Ethernet, USB, RS232 10) Focus: Standard focus 110mm, 70 to 250mm optional 11) Pipelining Speed: 150M per minute 12) Protection: Host optics closed, dust proof 13) Work Conditions: 5-50 centigrade, humidity below 95% Non condensing 14) Power supply: AC220V 50Hz 1000W
Feature Print consistently high quality images even on structured and uneven surfaces Print features include Text, Date, Time, Batch Number, Logo And Trademark Easy to be integrated at any position of the production line User friendly interface and most reliable ink system Design for adding ink and solvent automatically Self-monitor when machine works, without personal interference 32 bit embedded CPU, large memory, and the 8.4'' TFT bright clear touch screen Configure RS232 & USB communication interface, printing with computer Language alarm function. Applications Automobile part, beverages, cosmetics, electronic component, foods, pharmaceuticals, stone & wooden products, eggs, pipes & tubes, cables & wires etc. Hydraulic System Compact design Full automatic viscosity control and pressure control No external supply of compressed air required Multiple industry application with reasonable price and economical operation cost Electronic control system completely separated design from hydraulic system Stable performance, easy operation for Print Head Compatible design, maintenance friendly Automatic ink stream on when start up and ink stream suck back when turn off Nozzle size: 58 ++ M standard, 52 to 65 ++ M optional Easily accessible and can be installed in any position Distance from print head to print surface 1mm~30mm . Technical specification Print Lines 1-5 lines (5 x 5 dots) DOT Matrix figure and letter 5 x 5, 5 x 7, 8 x 10, 8 x 12, 12 x 16, 16 x 16, 24 x 24, and user-defined in 32 x 32 Memory 1000 message, 1000 graphics Print Speed 1400 character per second (5 x 7 dots) Letter Height 1-20mm Operating Interface Chinese, English Print Objects Chinese & English character, figure, date, time, and Numbering of reset Material metal, plastic, glass, wood, turing, electrical wire, cable etc Font Width up to 9 times Nozzle Connection Tube 3M Ink Color black, blue, red etc Consumption of Ink 70 millions character per litre Operating Environment 5-45 degree centigrade, below 90%(humidity) Power Source AC220V / 380V 50Hz 100AV.
Feature - Quick-dry black ink used industrial non-contact small character inkjet printers - Print consistently high quality images even on structured and uneven surfaces - Print features include text, date, time, batch numbers, logo and trademark - Easy to be integrated at any position of the production line - User friendly interface and most reliable ink system - 32 bit embedded CPU, large memory, and the 8.4'' TFT bright clear touch screen - Configure RS232 and USB communication interface, can upgrade the software. - Multitask system, printing and editing at the same time. Applications : Automobile part, foods, beverages, cosmetics, electronic component, pharmaceutical, stone, wooden, products, eggs, pipes and tubes, cables and wires etc. Hydraulic system Full automatic viscosity control and pressure control Diaphragm pumps with reliability, longer life, low maintenance cost than gear pump Electronic control system completely separated design from hydraulic system Print head - Compatible design, maintenance friendly - Automatic ink stream on when start up and ink stream suck back when turn off - Nozzle size: 58 ¼¬m standard, 52 to 65 ¼¬m optional - Easily accessible and can be installed in any position - Distance from print head to print surface 1mm~30mm Technical specification Print Lines 1-5 lines (5 x 5 dots) Dot Matrix figure and letter 5 x 5, 5 x 7, 8 x 10, 8 x 12, 12 x 16, 16 x 16, 24 x 24, and user-defined in 32 x 32 Memory 1000 message, 1000 graphics Print Speed 1,400 character per second (5 x 7 dots) Letter Height 1-20mm Operating Interface Chinese, English Print Objects English character, Arabic number, date, time, batch numbers, and logo, trademark, text Material metal, plastic, glass, wood, tubing, electrical wire, cable etc Font Width up to 9 times Nozzle Connection Tube 3M Ink Color black, blue,red etc Consumption of Ink 70 millions character per litre Operating Environment 5-45 degree centigrade, below 90%(humidity) Power Source AC220V / 380V 50HZ 100AV.
Compact design and fast installation - Easy to be integrated at any position of the production line - Original design, small size and lightweight, equiped with a small table or mounting bracket with the use of production line - More further environmental protection and energy saving - Un-contact processing, more environmental protection, lower power, fast laser marked and cost economy - Easy to use and Excellent compatibility - Simplicity of operation, easy to use, powerful anti-jamming performance, enough memory, multiply input and output interface, use with automatical anti-counterfeit and anti-disorder system - Adopt import laser, more safer and faster Operate Interface - Configure with laptop Applications Food, beverage, tobacco, electronic component, pharmaceuticals, ceramic wares, automobile part, electrical wire, cable, arts and crafts, rubber Laser CO2 Metal RF laser Power: 30W High-speed, stable performance, adjustable power, applicable to most of nonmetal material Carve and cut product very convenience, depth could be adjustable Model C-30B Refrigerate Style Air-cooled, Water-cooled Wave length 10.6mm Line Width 0.02mm Depth 0.04mm (up to the material) Industrial Controller Industrial control computer Print Content Character, logo, barcode, two-dimension code, image, graphics, DOT mosaic Operating Range Embeded many kinds of laser marked font, automatical serial number, Can be static and dynamic operation, automatic input with time and date change Information Input Keyboard, USB, serial data communication Interface Ethernet, USB, RS232 Focus Standard focus 110mm, 70 to 250mm optional Pipelining Speed 150M per minute Protection Host optics closed, dust proof Use Environment: 5-50 centigrade, humidity below 95% Non condensing Power supply: AC220V 50Hz 1000W
16ppm to 110 b/w and 10ppm to 50ppm colour speed, copier-printer-scanner option, dadf option, network option, papaer size up to 13"x19" paper size option, up 300gsm option.
Our company has built the reputation on pioneering better-than-OEM remanufactured printer parts. We have sufficient stock with complete categories, professional technique team.
Our company has built the reputation on pioneering better-than-OEM remanufactured printer parts. We have sufficient stock with complete categories, professional technique team.
Our company has built the reputation on pioneering better-than-OEM remanufactured printer parts. We have sufficient stock with complete categories, professional technique team.
Our company has built the reputation on pioneering better-than-OEM remanufactured printer parts. We have sufficient stock with complete categories, professional technique team.
Our company has built the reputation on pioneering better-than-oem remanufactured printer parts. We have sufficient stock with complete categories, professional technique team.
