Product Description Product Description Konica 1024iSAE-C 6PL Water-based Printhead To be used with: Konica Remarks: Original Attention: 1. The printhead is required to be installed by professional persons. 2. Due to the nature of Printer Parts and the many factors that go into installing them, we do not accept returns or give refunds on electronic or service parts. Once the package is delivered, it is the customer's responsibility to check the package for damage. If there is any visible damage on the package, please refuse the shipment and contact us immediately 3. Please seriously pay attention on information of printhead model while purchasing from us. Once received your item, please inspect if the printhead matches up with the model you required.If you have any problems, it is very important that contact us as soon as possible beforeinstalling it onto machine. Please be aware that we don't accept any return and refund once the printhead is installed on the machine.
Product Description KONICA 1024i MHE-D Printhead To be used with: Flora PP3200 UV Remarks: Original It is compatible with water based ink and uv ink.
Product Description KONICA 1024i MAE 13PL Printhead Remarks: Original
Product Description KONICA 1024i LHE 30PL UV Printhead Remarks: Original It is compatible with water based ink and uv ink.
Product Description Original Epson ME-80W/700FW/900WD/960 Printhead-F190000 To be used with: EPSON ME-80W/700FW/900WD/960/-FWD/85ND, WF-3011/3531,WF7515 Remarks: Original
Product Description EPSON ECO Solvent dx7 printhead - F189010 (Second Time Locked) To be used with: EPSON Pro 9906D Remarks: Original
Product Description Epson DX2 original, solvent resistant print head suitable for Mutoh Rockhopper I / 38 / RJ-800 / RJ-4100 / RJ-6100 / RJ-6154, Mimaki JV2, Roland CJ-500 / SC-500 / FJ-50 / FJ-52 printers. This is the original Epson DX2 solvent colour printhead, delivered in a sealed Epson original package with head ID. Two colour heads should be used on RH-I printers whereas one colour head and one black head should be used on RH-38 printers. Mutoh part number for this colour DX2 head is DE-49732. Manufacturer: Epson Printer compatibility: Mutoh RH-I / RH-38 / RJ-800 / RJ-4100 / RJ-6000 / RJ-6100 / RJ-6154 / Falcon, Mimaki JV2 / TX1, Roland SC-500 / SJ-600 / SJ-500 / CJ-500 / SC-500 / FJ-50 / FJ-40 / FJ-52 / FJ-42 DP part number : PPHEPDX2SC
Product Description To be used with: Epson Stylus Pro 4400, Epson Stylus Pro 4800, Epson Stylus Pro 7400, Epson Stylus Pro 7800, Epson Stylus Pro 9400, Epson Stylus Pro 9800 Printers Part number: F160000/F160010 Remarks: Original
Product Description For Epson STYLUS PRO 7700, 7890, 7900, 9700, 9890, 9900, WT7900 Otras caractersticas: Colour: Yes Compatible products: Epson STYLUS PRO 7700, 7890, 7900, 9700, 9890, 9900, WT7900 Printing colours: Black, Cyan, Magenta, Yellow Part number: F191040/F191010/F191080/F191110 Remarks: Original
Product Description 7600 9600 EPSON 2100 2200 F138040 F138050 Printhead Remarks: Original
Product Description To be used with: Epson Stylus COLOR 800, Epson Stylus COLOR 1520K, Epson Stylus COLOR 3000, Epson Stylus Photo R220, Epson Stylus Photo 230, Epson Stylus Photo 250 Part number: F056030/F056010
Product Description Emerald QE-256/80 AAA Printhead It is designed to eject adjustable 80 to 200 picoliter drops in binary jetting mode or a 80-picoliter fundamental drop in grayscale mode. This is done at a nominal 8-meter per second drop velocity when jetting fluids in the 10 to 14 centipoise range. Unparalleled flexible modes of operation include adjustable binary drop size and grayscale capability. Robust field proven metal nozzle plate technology provides precise drop placement accuracy of a wide variety of ink types, including UV-curable, solvent and aqueous.
Product Description Emerald QE-256/30 AAA Printhead It is designed to eject adjustable 30 to 80 picoliter drops in binary jetting mode or a 30-picoliter fundamental drop in grayscale mode. This is done at a nominal 8-meter per second drop velocity when jetting fluids in the 10 to 14 centipoise range. Unparalleled flexible modes of operation include adjustable binary drop size and grayscale capability. Robust field proven metal nozzle plate technology provides precise drop placement accuracy of a wide variety of ink types, including UV-curable, solvent and aqueous.
Product Description This Kit Arizona 6100 XTS Series Printhead is suitable for Oc Arizona 6100 and Fujifilm Acuity F series printers. This is the original Oc part (number 3010118098).
Product Description This Kit F/S printhead CE2 is suitable for Oc Arizona 460 GT and Fujifilm Acuity Advance Select HD4006 printers. This is the original Oc part (number 3010114604 replaced by 3010115446).
Product Description This Kit F/S Printhead CA4 is suitable for the Oc Arizona 350 GT / 350 XT printers. This is the original Oc part (number 3010108132). Product Specifications Technology: Multi-drop grayscale micro-piezo Grayscale levels: 16 Active nozzles: 318 Print swathe width: 53.6 mm Nozzle pitch: 169 �¼m Native resolution: 150 dpi Printhead weight: 148 g Dimensions: 85 x 70 x 23 mm Drop volume: 6 - 90 pl Typical firing frequency: 2.8 - 28 kHz Ink Compatibility: oil-based pigment ink and UV curable pigment ink
Product Description This Ricoh GEN3-E3 (MH1603/1803/1903) printhead is suitable for DYSS Apollo UV R220 printers. This is the original Ricoh part. Product Specifications Size: 7.8 x 120 x 35 mm (excluding cables) Head materials: SST, Pd and Epoxy Adhesive Nozzle plate surface: Non-coated SST Number of nozzles: 192 nozzles Nozzle spacing: 0.3387 mm Piezo type: D33 Stacked PZT Temperature control: Integrated Heater and Thermistor Operator temperature range: Up to 80�° C Native drop volume: 30 pl - 45 pl Drop volume range: 12-50 pl Jetting frequency: Up to 30 kHZ Life: 100 billion actuations per nozzle
Mimaki JFX500-2131 Printhead GEN5 Assy - M013497 - Duta-print.com Product Specifications Dimensions: 89 x 25 x 69 mm (excluding cables) Head materials: SST, Nickel alloy and Epoxy Adhesive Nozzle plate surface: Coated SST Number of nozzles: 4 x 320 nozzles Nozzle spacing: 0.1693 mm Nozzle density: up to 600 npi Piezo yype: D33 Stacked PZT Temperature control: Integrated Heater and Thermistor Operator temperature range: Up to 80�° C Native drop volume: 7 pl Drop volume range: 7 - 35 pl Drop velocity: 7 m/s Jetting frequency: Up to 60 kHZ Life: 100 billion actuations per nozzle Manufacturer: Mimaki Printer compatibility: Mimaki JFX500-2131 / UJV500-160 DP part number : PPHMI13301 This printhead GEN5 (MH5420/5440) is suitable for Mimaki JFX500-2131 & UJV500-160 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M013497 / M015068).
Mimaki JFX200-2513 Head Adapter Assy - M015028 Product Specifications Dimensions: 89 x 25 x 69 mm (excluding cables) Head materials: SST, Nickel alloy and Epoxy Adhesive Nozzle plate surface: Coated SST Number of nozzles: 4 x 320 nozzles Nozzle spacing: 0.1693 mm Nozzle density: up to 600 npi Piezo yype: D33 Stacked PZT Temperature control: Integrated Heater and Thermistor Operator temperature range: Up to 80 C Native drop volume: 7 pl Drop volume range: 7 - 35 pl Drop velocity: 7 m/s Jetting frequency: Up to 60 kHZ Life: 100 billion actuations per nozzle
Mimaki JF-1631 Print Head This Mimaki JF-1631 is supplied with head ID, voltage and waveform information. Specifications - Technology: On Demand Piezo Electric - Max. Resolution: 1200 dpi - Droplet Size: 6 to 90 pico litre - Maximum Grayscale Levels: 16 - Tot. Amount of Nozzles: 318 - Nozzle Spacing: 169 microns - Firing Frequency: 28 kHz (1 drop) - 2.8 kHz (15 drops) - Driving Voltage: 14 - 31 V - Ink Compatibility: Oil Based Pigment Ink and UV Ink Printer compatibility: Mimaki JF-1631 / JF-1610 This Mimaki JF-1631 / CA4 Print Head on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 16 levels of grey, since each dot is created through a minimum of 6 pico litre to a maximum of 90 pico litre of ink. The Mimaki JF-1631 / CA4 Print Head is suitable for UV curable and Oil based inks, it has 2 ink inlet ports (which can be easily removed to be replaced with a 1 ink inlet assembly) and a chassis which provides a built-in water channel and complete sealing designed for easy temperature control. This is Mimaki original CA4 printhead without the bracket (corresponds to Mimaki part number M007278). It carries a one year product warranty. An installation video is available in the video tab of this product and full installation instructions are included with the printhead. The JIG tools used to calibrate and fit this head are available as related products.
