Our low pressure compressors are the most efficient and reliable units on the market, with a package design that makes them easy to install wherever they are needed. Each component of these compressors is mounted, piped and wired for easy single point air and electrical connection.
Description
The Naili low-pressure vane air compressors is a new type of compressor developed in response to the need for low pressure requirement and energy saving. It changes the use of conventional high-pressure compressors that depressurize compressed air and then deliver it to the air plant, thus saving energy.
Industries:
Wastewater Treatment, Textiles, Food & Beverage, Medical, Transport, Petrochemicals, Packing, Paper & Printing, Pharmaceuticals, Power Industry.
The units are ready for connection and are easy to install, requiring no additional foundations.
High air quality
The large size of the tube cooler allows water cooler technology to replace conventional oil lubrication. This ensures absolutely no risk of contamination and a class 0 air output.
What is an oil-free compressor?
An oil-free compressor or oil-free air compressor is a type of air compressor that does not use oil for lubrication. This type of compressor runs at a lower speed, which makes them quieter and more efficient.
What is the difference between an oiled and an oil-free compressor?
Direct piston oil-free compressors differ from oiled compressors because they do not require oil to operate. Oil-operated air compressors are ideal for applications where high pressure and capacity are required. Oil needs to be added to the compressor to allow for higher RPM and to keep the compressor running at high speed. Oil-free air compressors do not require oil and are lighter in weight and easier to carry. This oil-free compressor is ideal for applications where noise and air quality need to be considered.
Oil free piston air compressor applications and industries
The laboratory, medical, electronics, dental and food and beverage industries benefit greatly from oil free piston air compressors because they are quiet and easy to maintain.
CM3000A Refrigerant recovery machine in portable refrigerant recovery series are designed and manufactured by CM company,which are for out maintenance,capable to recovery all kinds of refrigerants,even CFC/HCFC/HFC categories of refrigerants including R12, R22, R134, R407C, R410A etc. They are suitable for any situation for refrigerants recovery needs.
CM3000A Refrigerant recovery machine incorporates 1 HP high efficiency compressor that maximizes speed in both liquid and vapor recovery.
2892 Compressors Suppliers
Short on time? Let Compressors sellers contact you.
Polar-Chiller refrigerating compressed air dryers are the best after-disposing machine for the air compressors, and is the perfect clean machine in air-power controlling, air-power tools, precision machines, food packing, light industry, textile industry, chemical industry and so on.
The components of Polar-Chiller product are imported from famous factory in the world. Through perfect structure, specially designed pipeline system, high-efficiency heat exchanger/ cooling-evaporator and gas-liquid separator, can remove the moisture, oil drops and solid grain from the compressed air. They have an advantage that others do not have. If you choose it, you will get the greatest worth.
Features and Benefits
â?¢ The build-in aftercooler for high temp type is suitable to operate at different temperature below 80â??
â?¢ The unit applies refrigerant pressure control mode, which makes the air dew point identically equal.
â?¢ The selected and used parts and components are the products from famous manufacturers in the world, which can ensure operational reliability of the unit.
â?¢ Cooling evaporator adopts the structure of large heat-exchange area and detour spiral. That makes the compressed air stay long inside the evaporator to ensure sufficient heat exchange. More moisture in the air can be condensed to become liquid drop, and therefore optimum drying effects can be achieved.
â?¢ The re-heating device makes heat exchange between the cold air and the refrigerant high-pressure pipe, which can exclude the condensation dew of downstream pipe. This ensures the reliability of the hydraulic system. On the other hand, the cold-media in high-pressure pipe flows into the condenser only after it has been cooled. That can reduce the load of the condenser and increase COP (Coefficient of performance), and therefore the dryer can work normally even in harsh conditions.
â?¢ The design of inside piping system takes various principles of compress air purification into full consideration in order to separate the moisture and most remain solid grains and oil-drops, which have been pre-treated when passing the main pipe, from the compressed air by means of gravity separation, impacting, high-speed centrifugalizing, baffle-separation and diffusion, It ensures the desiccation and cleanliness of output air, and reduces the load of air treating element in downstream to minimum.
â?¢ Refrigerant: R-22 (can choose R407C/R134a/R410a/R404a)
Air-Cooled Type Refrigerated Compressor Air Dryer
â?¢ Have high-temperature type or low-temperature type to choose.
â?¢ Inlet air temperature: high-temperature typeâ?¤80â??ï¼?low temperature typeâ?¤50â??.
� Power scour�1Φ 220V 50(60) HZ(�14.2m3/min); 3Φ 380V 50(60)HZ
â?¢ Compressed air capacityï¼?0.47 m3/min -72.3 m3/min
â?¢ Matching air compressorï¼?5HP-480HP (0.37KW-360 KW)
â?¢ Working pressï¼?0.15-1Mpa (1.5-10.2kgf/cm2)
Polar-Chiller refrigerating compressed air dryers are the best after-disposing machine for the air compressors, and is the perfect clean machine in air-power controlling, air-power tools, precision machines, food packing, light industry, textile industry, chemical industry and so on.
The components of Polar-Chiller product are imported from famous factory in the world. Through perfect structure, specially designed pipeline system, high-efficiency heat exchanger/ cooling-evaporator and gas-liquid separator, can remove the moisture, oil drops and solid grain from the compressed air. They have an advantage that others do not have. If you choose it, you will get the greatest worth.
Features and Benefits
â?¢ The build-in aftercooler for high temp type is suitable to operate at different temperature below 80â??
â?¢ The unit applies refrigerant pressure control mode, which makes the air dew point identically equal.
â?¢ The selected and used parts and components are the products from famous manufacturers in the world, which can ensure operational reliability of the unit.
â?¢ Cooling evaporator adopts the structure of large heat-exchange area and detour spiral. That makes the compressed air stay long inside the evaporator to ensure sufficient heat exchange. More moisture in the air can be condensed to become liquid drop, and therefore optimum drying effects can be achieved.
â?¢ The re-heating device makes heat exchange between the cold air and the refrigerant high-pressure pipe, which can exclude the condensation dew of downstream pipe. This ensures the reliability of the hydraulic system. On the other hand, the cold-media in high-pressure pipe flows into the condenser only after it has been cooled. That can reduce the load of the condenser and increase COP (Coefficient of performance), and therefore the dryer can work normally even in harsh conditions.
â?¢ The design of inside piping system takes various principles of compress air purification into full consideration in order to separate the moisture and most remain solid grains and oil-drops, which have been pre-treated when passing the main pipe, from the compressed air by means of gravity separation, impacting, high-speed centrifugalizing, baffle-separation and diffusion, It ensures the desiccation and cleanliness of output air, and reduces the load of air treating element in downstream to minimum.
â?¢ Refrigerant: R-22 (can choose R407C/R134a/R410a/R404a)
Water-Cooled Type Refrigerated Compressor Air Dryer
â?¢ Have high-temperature type or low-temperature type to choose.
â?¢ Inlet air temperature: high-temperature typeâ?¤80â??ï¼?low temperature typeâ?¤50â??.
� Power scour�1Φ 220V 50(60) HZ(�14.2m3/min); 3Φ 380V 50(60) HZ
â?¢ Compressed air capacityï¼?0.47 m3/min -300 m3/min
â?¢ Matching air compressorï¼?5HP-2000HP (0.37KW-1500 KW)
â?¢ Working pressï¼?0.15-1Mpa (1.5-10.2kgf/cm2)
Ningbo Aoxin Hvac PART CO., Ltdis the quality branded compressor Zhejiang agent. And Have been in the refrigeration industry for over 8 years.
We supply with the GMCC, SANSUNG, LG Rotary & Refrigerator Compressor, Panasonic Sanyo & Daikin Scroll Compressor, and other air conditioner and refrigerator spare parts and Refrigerant use tools.Â
We are sure you that the product we supply to you are all new and original !!!
We supply with the GMCC, SANSUNG, LG Rotary & Refrigerator Compressor, Panasonic Sanyo & Daikin Scroll Compressor,, and other air conditioner and refrigerator spare parts and Refrigerant use tools.,
NINGBO AOXIN HVAC PART CO., LTD, is the quality branded compressor Zhejiang agent. And Have been in the refrigeration industry for over 8 years.
REFRIGERATION COMPRESSOR PARTS , CARRIER, BITZER , COPELAND, SABROE ,GRASSO, MYCOM, YORK, DAIKIN, GRAM, BOCK, FRICK , VILTER, TRANE, STALL ,INGERSOLL RAND, ATLAS COPCO ARE AVAILABLE WITH US. WE PROVIDE BEST QUALITY REPLACEMENT SPARE PARTS.
REFRIGERATION COMPRESSOR PARTS , CARRIER, BITZER , COPELAND, SABROE ,GRASSO, MYCOM, YORK, DAIKIN, GRAM, BOCK, FRICK , VILTER, TRANE, STALL ,INGERSOLL RAND, ATLAS COPCO ARE AVAILABLE WITH US. WE PROVIDE BEST QUALITY REPLACEMENT SPARE PARTS.
REFRIGERATION COMPRESSOR PARTS , CARRIER, BITZER , COPELAND, SABROE ,GRASSO, MYCOM, YORK, DAIKIN, GRAM, BOCK, FRICK , VILTER, TRANE, STALL ,INGERSOLL RAND, ATLAS COPCO ARE AVAILABLE WITH US. WE PROVIDE BEST QUALITY REPLACEMENT SPARE PARTS.
REFRIGERATION COMPRESSOR PARTS , CARRIER, BITZER , COPELAND, SABROE ,GRASSO, MYCOM, YORK, DAIKIN, GRAM, BOCK, FRICK , VILTER, TRANE, STALL ,INGERSOLL RAND, ATLAS COPCO ARE AVAILABLE WITH US. WE PROVIDE BEST QUALITY REPLACEMENT SPARE PARTS.
REFRIGERATION COMPRESSOR PARTS , CARRIER, BITZER , COPELAND, SABROE ,GRASSO, MYCOM, YORK, DAIKIN, GRAM, BOCK, FRICK , VILTER, TRANE, STALL ,INGERSOLL RAND, ATLAS COPCO ARE AVAILABLE WITH US. WE PROVIDE BEST QUALITY REPLACEMENT SPARE PARTS.
REFRIGERATION COMPRESSOR PARTS , CARRIER, BITZER , COPELAND, SABROE ,GRASSO, MYCOM, YORK, DAIKIN, GRAM, BOCK, FRICK , VILTER, TRANE, STALL ,INGERSOLL RAND, ATLAS COPCO ARE AVAILABLE WITH US. WE PROVIDE BEST QUALITY REPLACEMENT SPARE PARTS.
REFRIGERATION COMPRESSOR PARTS , CARRIER, BITZER , COPELAND, SABROE ,GRASSO, MYCOM, YORK, DAIKIN, GRAM, BOCK, FRICK , VILTER, TRANE, STALL ,INGERSOLL RAND, ATLAS COPCO ARE AVAILABLE WITH US. WE PROVIDE BEST QUALITY REPLACEMENT SPARE PARTS.
REFRIGERATION COMPRESSOR PARTS , CARRIER, BITZER , COPELAND, SABROE ,GRASSO, MYCOM, YORK, DAIKIN, GRAM, BOCK, FRICK , VILTER, TRANE, STALL ,INGERSOLL RAND, ATLAS COPCO ARE AVAILABLE WITH US. WE PROVIDE BEST QUALITY REPLACEMENT SPARE PARTS.
REFRIGERATION COMPRESSOR PARTS , CARRIER, BITZER , COPELAND, SABROE ,GRASSO, MYCOM, YORK, DAIKIN, GRAM, BOCK, FRICK , VILTER, TRANE, STALL ,INGERSOLL RAND, ATLAS COPCO ARE AVAILABLE WITH US. WE PROVIDE BEST QUALITY REPLACEMENT SPARE PARTS.
REFRIGERATION COMPRESSOR PARTS , CARRIER, BITZER , COPELAND, SABROE ,GRASSO, MYCOM, YORK, DAIKIN, GRAM, BOCK, FRICK , VILTER, TRANE, STALL ,INGERSOLL RAND, ATLAS COPCO ARE AVAILABLE WITH US. WE PROVIDE BEST QUALITY REPLACEMENT SPARE PARTS.
2892 Compressors Suppliers
Short on time? Let Compressors sellers contact you.
