The benefits of ptek rchf3 Ripple, it also integrate the input and output protections and Is equipped with an over-temperature control both on the Primary side and the secondary side of the converter. With a wholly programmable control unit, easy-to-use with the User-friendly graphic interface displaying all the parameters, Historical data of the charge cycles executed, alarms, data Plate and all general information concerning the device. The interface also allows setting all the charge parameters, Selecting the charge curves, setting the clock and activating all The optional functions. Ptek rchf is equipped with a monochromatic graphic lcd Display of 64x128 pixels. The control unit can be connect it to a personal computer. An interface software for pc is available permitting a whole Configuration of the ptek rchf, in order to check and monitor All the functions in real time. The software is equipped With a specific tool for the charge curve configuration and Customization. Input voltage: 400 vca ± 15% three-phase, input frequency: 50 – 60 hz, Efficiency: ~ 90%, operating temperature: – 20 to + 50 °c, current drawn by the Battery: 0 a, if network electrically bonded, protection against output short-circuit, Protection against polarity reversal, thermal protection semi-conductors, input Protection, charge curve: programming and settings, displaying and messages with Monochromatic graphic lcd display, thermal compensation with optional probe, Ventilation with forced air circulation, metallic body with these dimensions: 830 x 500 x 500 mm, protection ip20, in conformity with the low voltage directive 73/23/ Cee and the emc and directive 89/336/cee and their successive amendments.
Attery charger due to battery Disconnection, smart charging system according to the discharge level of the battery, Short check of functions and times, option: custom-made colour and custom-made Logo and silk-screen printing, final acceptance test conforming to safety regulations, Charging with decreasing current (wa characteristic): 9÷11 h charging time, charging With decreasing current (wo - wa characteristic): 7÷8 h charging time, complete With mains and battery cables; assembly of plugs and battery connectors on request. Wa (din 41774): Charge at decreasing current with intervention of the Final charge at 2.40 v/cell, final charge with timed Control 9h / 11h, fixed charging time (equalization Charge excluded), equalization charge (week-end Charge) to be recalled. It will start after 55’ from Charge end, duration of equalized charging phase: Each hour 5’ (repeated for 48 hours), calculation to Determine the size of suitable battery charge: 16a For every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a). Wo-wa: Charge at decreasing current with intervention of the Final charge at 2.42 v/cell, final charge with timed Control 7h / 8h, fixed charging time (equalization Charge excluded), equalization charge (week-end
ier output, rectifier bridge with snubber protection, short check of functions and times, option to program the equalized charge automatically, lab tested electronic circuit conforming to the directive on electromagnetic compatibility and CE marking, automatic Start, automatic disconnection of battery charger due to battery disconnection, equalization charge based on time, charging with decreasing current (Wa characteristic): 9÷11 h charging time, transformer thermal protection, modular installation on galvanized steel base (20/10) – (30/10), sheet steel case with modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, oven-baked, standard colour: RAL 2002 red, option: custom-made colour, logo and silk-screen printing, mains input and d.c. output polarized cables, complete with mains and battery cables; assembly of plugs and battery connectors on request. “WA” CHARACTERISTIC (DIN 41774): charge at decreasing current with intervention of the final charge at 2.40 V/cell., final charge with timed control 9h / 11h, fixed charging time (equalization charge excluded), equalization charge (week-end charge) to be recalled. It will start after 55’ from charge end, duration of equalized charging phase: each hour 5’ (repeated for 48 hours), calculation to determine the size of suitable battery charge: 16A for every 100 Ah of the battery (e.g. 500 Ah battery: 16Ax5 = 80A).
The battery chargers of the cemb-easy 3000 Series are designed to recharge medium capacity Traction and start lead-acid batteries and are O the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. Technical characteristics easy 3000: • 230v - 50hz one phase supply, (with possibility to request voltages different from The standard ones), adjustable to ± 5% or ± 10% • electronic control provided with final charge timer • on-off switch • rectifier bridge with silicon diodes, natural cooling, with snubber protection and Gemov • tropicalized stray-flux transformer : tenvex copper windings with double enamel Insulation; class h; impregnated in autoclave with ecological epoxy resins. • 12/10 sheet steel case provided with electrical bondings and ergonomic handle • epoxy powder coating, oven-baked • standard colour: ral2002 red • new lexan plate with charging data very easy to understand • lab-tested electronic circuit conforming to the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. • charge at decreasing current with intervention of the final charge At 2.40 v/cell • final charge with timed control 9h / 11h • fixed charging time (equalization charge excluded) • equalization charge (week-end charge) to be recalled. It will start after 55’ from Charge end • duration of equalized charging phase: each hour 5’ (repeated for 48 hours) • calculation to determine the size of suitable battery charge: 16a for every 100 Ah of the battery (e.G. 500 ah battery: 16ax5 = 80a)
Asuring via digital Gearcase. Such microprocessor control is designed to optimize the Charging cycles for any type of battery. • 230v coil three-pole contactor. • d.C. Fuse on rectifier output. • delta-star stray flux three-phase power transformer class h; Impregnated in autoclave with ecological epoxy resins, with Thermocouples for disconnection due to maximum temperature. • three-phase rectifier bridge with silicon diodes, natural cooling, with
Model: 9.7" mtk8382 quad core Operation system: google android 4.2 Working time: 8 hours G-sensor: 4-dimensional gravity sensing Wireless: wifi 802.11b/g/n Gsm/3g: 3g calling Communication function: dual card dual standby, 3g, 2g network, gsm850/900/1800/1900;wcdma2100/1900/850/900 Otg: support Bluetooth: support Flash flashlight: support Gps: built-in gps navigation Color: black tp, silver cover Dimension(w*d*h): 27.3*23.8*2.2cm unit n.W: 1.635kg giftbox(w*d*h): 30*21*5.6cm gw: 1.5kg caton size: 55*30*25cm quantity: 20pcs/carton weight: 32kg
Charge end, duration of equalized charging phase: Each hour 5’ (repeated for 48 hours), calculation to Determine the size of suitable battery charge: 16a For every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
With decreasing Current (wa characteristic): 9÷11 h charging time, transformer thermal protection, Modular installation on galvanized steel base (20/10) – (30/10), sheet steel case With modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, ovenbaked, Standard colour: ral 2002 red, option: custom-made colour, logo and silkscreen Printing, mains input and d.C. Output polarized cables, complete with mains And battery cables; assembly of plugs and battery connectors on request. “wa” characteristic (din 41774): Charge at decreasing current with intervention of the final charge at 2.40 v/cell., final charge with timed control 9h / 11h, fixed charging Time (equalization charge excluded), equalization charge (week-end Charge) to be recalled. It will start after 55’ from charge end, duration Of equalized charging phase: each hour 5’ (repeated for 48 hours), Calculation to determine the size of suitable battery charge: 16a for Every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Switching technology with microcontroller digital control. They Are flexible and reliable devices. The high efficiency of the battery Chargers assures a remarkable energy saving optimizing the Economic benefits and permitting to amortize the investment for The selection of high frequency in a short time. They are suitable for the recharge of all kind of batteries (leadacid Gel, sealed, agm batteries, etc…) and allow selecting a specific Charge curve or configuring easily a suitable curve for the type of Battery. They are characterized by a negligible residual output ripple. The battery chargers integrate the input and output protections And are equipped with an over-temperature. They have a wholly programmable control unit, easy-to-use thanks To the user-friendly graphic interface displaying all the charge Parameters, the alarms, the data plate and all general information Concerning the device. These kind of battery chargers are equipped With a monochromatic graphic lcd display/led. Technical characteristics: - input voltage: 230 vca ± 10%, mono-phase - input frequency: 50 – 60 hz - efficiency: ~ 90% - operating temperature: – 20 to + 45 °c - current drawn by the battery: 0 a, if network electrically Bonded - protection against output short-circuit: yes, fuse - protection against polarity reversal: yes, fuse - thermal protection semi-conductors: yes - input protection: yes, fuses and varistors - charge curve: programming and settings at Will - default iu ia - displaying and messages: monochromatic 2x20 lcd Display - led - audible alarm device: yes - state charge indicator: yes multicolours
Product description Basic features: Capacity: 9l 100-240v 50/60hz 800w 60 minutes timer with bell ring With indicator light Heating element: quartz With removable crumb tray Black or white housing and zinc cavity We have electric ovens for 9l, 12l, 20l, 26l, 28l, 32l, 35l, 45l, 48l.50l Color box
Product description Basic features: Capacity: 28l 100-240v 50/60hz 1500w 60 minutes timer with bell ring 100-250 temperature selector With indicator light 4 stages of switch heating elements Heating element: stainless steel Black or white housing and zinc cavity Accessories: Enamel bake tray (1pc), wire rack (1pc), Tray handle (1pc) Optional: Rotisserie function (sy-2801r) Convection function (sy-2801c) Inner lamp (sy-2801l) 2 hotplates (sy-2801h2a) (2¡¨¢?155mm, 1000w+500w) Top tray (sy-2801t) Stainless steel housing/door frame or other painting Aluminum/non-stick/self-cleaning cavity Crumb tray We have electric ovens for 9l, 12l, 20l, 26l, 28l, 32l, 35l, 45l, 48l.50l Color box
Product description Basic features: Capacity: 48l 100-240v 50/60hz 2000w 60 minutes timer with bell ring 100-250 temperature selector With indicator light 4 stages of switch heating elements Heating element: stainless steel Black or white housing and zinc cavity Accessories: Enamel bake tray (1pc), wire rack (1pc), Tray handle (1pc) Optional: Rotisserie function (sy-4801r) Convection function (sy-4801c) Inner lamp (sy-4801l) 2 hotplates (sy-4801h2a) Big hotplate: ?185mm, 1000w Small hotplate: ?155mm, 500w Top tray (sy-4801t) Stainless steel housing/door frame or other painting Aluminum/non-stick/self-cleaning cavity Crumb tray We have electric ovens for 9l, 12l, 20l, 26l, 28l, 32l, 35l, 45l, 48l.50l... Color box
0mm, 1150mm Wall panel width: 950mm, 1000mm, 1150mm Eps thickness: 30mm, 50mm, 75mm, 100mm, 150mm, 200mm Eps density: 6kgs/m³, 8kgs/m³, 10kgs/m³, 12kgs/m³, 15kgs/m³, 20kgs/m³ Steel thickness: 0.3mm, 0.35mm, 0.4mm, 0.45mm, 0.5mm, 0.6mm, 0.7mm Steel colors: white grey, blue, red, any other colors are available based on order quantity
Technical parameters¡¨ºo Model no 8106u (8106u1 , 8106u2) Input voltage Dc 13v (dc 11-15v) 50 +/- 3 hz Usb output Dc 5v (500ma, 1000ma, 2100ma) Continuous power 3000w Peak power 6000w Output wave Modified sine wave Effiency More than 85% No load current Less than 0.45a Input under voltage alarm Dc 12v input Dc 10.2 ¡¡ìc 10.8v Dc 24v input Dc 20.4 ¡¡ìc 21.6v Input under voltage shut down Dc 12v input Dc 9.2 - 9.8v Dc 24v input Dc 18.4 - 19.6v Input over voltage shut down Dc 12v input Dc 15 ¡¡ìc 16v Dc 24v input Dc 30 ¡¡ìc 32v Over temperature protection Yes The best working temperature 5 - 35 centigrade Cooling method Fan Accessories Battery clip cable Size (l¡¡§¡éw¡¡§¡éh) 380¡¡§¡é215¡¡§¡é100mm Packing Color box Q¡¡£¤ty / ctn 2 pcs G.W. / n.W. / ctn 13.5 / 12.5 kgs Meas / ctn (l¡¡§¡éw¡¡§¡éh) 47.5¡¡§¡é31¡¡§¡é29.5cm
Description: Led roadway signal light (crosswalk) Model number: Zszm-xhd-rx-200/300/400-xx Emitting area: Diameter 200mm or customized Voltage:ac85-265v 50/60hz Colour yellow / red / green red Light intensity¡ý6000mcd Wavelength 630¡à5nm Power consumption ¡ü12w Beam angle: 30degree Led average life time ¡ý100000h Standard packing
A complete system includes the following items: -01 high energy ignition unit -02 high energy igniter -02 gas pilot light -02 high energy cables -01 flame-resistant power cable -01 ip65 start box High energy ignition system are designed to ignite crude-oils and gas during well test operation Carton
Measures body weight, fat, water, muscle, BMI (body mass index), kcal, bones and visceral fat Supports iOS and Android Intercommunication technology Power step-on function Large platform (325*325mm) Large 4.3-inch LCD with blue backlight AC body fat measurement 10 user groups enabled Back light LCD Display:95 * 57 mm Power:DC 6V (4 x AABatteries)
Stainless steel heating element and easy cleaning Detachable egg tray. Fast cooking and energy saving Pilot light indicator and power on button Boil dry protection With thermal shut-off Built-in heating element Description Power: 350W Voltage: 110V-220V Capacity: For cooking 7 eggs at one time Model LG-312 Gift box size 165*165*190mm Carton size 680*345*590mm PCS/CTN 24
Compact volume High precision Fast response Long service life Overload protection Short circuit protection Anti-interference design Reverse polarity protection Ce, ul, rohs certification Ip67 protection, dust-proof, vibration-proof, water-proof and oil-proof Diameter:3mm Mounting:shielded Switching distance:0.6mm Housing material:stainless steel With led/without led:with led Operating voltage:10-30vdc Ripple:
