Relay
Basic weight (g/m²) = 220 ± 10% Tensile strength (astm d 828) knm = md: 14 - 16; xd: 10 – 12 Corrosion or delamination (95% rh @ 50°c, 30 days) = none Permeabilty/wvtr = (astm e96-80), g/h/m²) = max 0.01 Water resistance = no delamination Vapor resistance = excellent Tear resistance = good - using 99% pure aluminum foil with high reflectivity & low emissivity surface is the most effective radiant barrier. - reinforced with special fiberglass scrim for higher mechanical product strength. - special bonding layer combined with aluminum foil giving it superior vapor barrier & fire retardant properties. - resistance to moisture, mold and fungi. - no change of performances over time due to compaction, disintegration or moisture absorption. - light weight but high tensile strength with special fiberglass scrim reinforced - installation friendly & durability. - no crumbling material / non-itchy - eco friendly. - characteristics of this product is not easily change & is stable & will not delaminated when exposed to high temperature/high humidity of tropical climate. Packaging: 1.22m x 45m in roll form in pallet 1.22m x 60m in roll form in pallet
Features: > > 8 channel 4~20ma signal acquisition, channel to channel is isolated > > testing accuracy> 0.05% > > rs485/232 output, can programme the accuracy of module > > input/output/power supply three-port isolation: 3000vdc > > wide power supply: 8~50vdc > > high reliability, programming convenience, easy to install. > > users can set module address, baud rate. > > support modbus rtu communication protocal Applications > > temperature signal testing/monitoring/cintrol > > rs232/485 industrial automation control system > > industial field signal isolation > > process monitoring & control > > test sensors signal > > laboratory data acquisition > > medical machine monitoring > > 4~20ma signal acquisition Dimensions:123*70*30mm
Max power 2.8kw Capacity 12000mah Application Power bank, emergency car jump starter Color White black 15 sets car jump starter in a carton box, carton size: 28 x 34 x 58.5 cm
Ppi series characteristic silicon iron distrubuted gapped powder core lower losses than powder iron cores good dc bias performance lower cost
L-signal measurement, and industrial-site signal isolation and long-term transmission and so on. Products include power supply isolation, signal isolation, linearization, a/d conversion and rs-485 serial communication circuit module. Each serial port can connect maximum 256 pcs of isoad series modules, means of communication using character communication protocol or modbus rtu communication protocol. Its instruction set compatible with the adam modules, the baud rate is set by the user, with other manufacturers control module hanging in the same rs-485 bus, to facilitate host programming. Iso ad series of products are based on single chip of intelligent monitoring and control systems, all the user sets such as the calibration value, address, baud rate, data format, checksum status and other configuration information is stored in nonvolatile memory eeprom inside. Isoda series of products according to industry standard design, manufacture, signal output / communication interface isolation, can withstand 3000vdc isolation voltage, anti-interference ability, high reliability. Operating temperature range: - 45 ~ +80. Model selection Isoad16 u(a) - Vin/iin U1: 0-5v a1: 0-1ma U2: 0-10v a2: 0-10ma U3: 0-75mv a3: 0-20ma U4: 0-2.5v a4: 4-20ma U5: 0-¡¨¤ 5v a5: 0-¡¨¤ 1ma U6: 0-¡¨¤ 10v a6: 0-¡¨¤ 10ma U7: 0-¡¨¤ 100mv a7: 0-¡¨¤ 20ma U8: customized a8: customized Communication interface 485: output is rs-485 interface 232: output is rs-232 interface Dimensions:58*87.5*59mm
Characteristic: Efficiency grade: 0.1/0.2/0.5 International standard signal input: 0-5v/0-10v/1-5v, 0-10ma/0-20ma/4-20ma Output internal signal with high load capability: 5v/0-10v/1-5v, 0-10ma/0-20ma/4-20ma and so on U3: 0-75mv P3: dc5v O4: 0-5v U4: 0-2.5v P4: dc15v O5: 0-10v U8: customer choose P8: customer choose O6: 1-5v A1: 0-1ma O8: customer choose A2: 0-10ma A3: 0-20ma A4: 4-20ma A8: customer choose Example: Eg1: input: 0-5v Accessorial power supply: 24vdc Output: 4-20ma Model: din 1x1 iso-u1-p1-o1 Eg2: output: 4-20ma Accessorial power supply: 24vdc Output: 4-20ma Model: din 1x1 iso-a4-p1-o1 Dimension:62*51*83mm
The proportions of aluminum alloy and steel can be varied to obtain the relation between currentcarrying capacity and mechanical strength best suited to each application. Core wire for aacsr is available with class a, b or c galvanizing; "aluminized" aluminium coated (az): or aluminium clad (aw). Key benefits : Used as bare overhead transmission cable and as primary and secondary distribution cable. Aacsr offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity. Wooden
Product description Construction Acar has aluminium 1350 h-19 wires concentrically stranded around a 6201-t81 aluminium Alloy core. Typically, the 6201-t81 is the conductor core, but in certain designs, the 1350 h-19 and the 6201-t81 wires may be stranded in the same layer. Standards: Moseroth acar meets or exceeds the following astm specifications: B-230 aluminum wire, 1350-h19 for electrical purposes. B-398 aluminum-alloy 6201-t81 for electrical purposes. B-524 concentric-lay-stranded aluminum conductors, aluminum alloy reinforced acar, 1350/6201. Wooden
Basic weight (g/m²) = 220 ± 10% Tensile strength (astm d 828) knm = md: 14 - 16; xd: 10 – 12 Corrosion or delamination (95% rh @ 50°c, 30 days) = none Vapor resistance = excellent Tear resistance = good Packaging: 1.22m x 45m in roll form in pallet 1.22m x 60m in roll form in pallet
24 bit accuracy, have been calibrated all signal input before ex factor. Also, users can programme himself, two input types must be same when testing two signals. Communication software: Communication interface: 1 standard rs485 interface or 2 standard rs232 interface Communication agreement: standard ascii, modbus, can make network communicate With plc, rtu or watch software. Data format: 10 bit, 1 start bit, 8 data bits, 1 stop bit. Communication address (0~255) and baud rate (300\600\1200\2400\4800\9600\19200\ 38400bps), max. Communication distance: 1200m, connect by both twists shiled cable. ¡¨¤ 15kv esdprotection, communication response time is less than 100ms. Anti jamming: Set checksum according to need. Its inside contains momentary bate diode, can Restrain surge impulse, protect modules. Model selection: Iso 4021a u(a) - Input voltage or current signal U1: 0-5v a1: 0-1ma U2: 0-10v a2: 0-10ma U3: 0-75mv a3: 0-20ma U4: 0-2.5v a4: 4-20ma U5: 0-¡¨¤ 5v a5: 0-¡¨¤ 1ma U6: 0-¡¨¤ 10v a6: 0-¡¨¤ 10ma U7: 0-¡¨¤ 100mv a7: 0-¡¨¤ 20ma U8: customized a8: customized Communication interface 485: output is rs-485 interface 232: output is rs-232 interface 232/485: output is rs-232orrs-485interface, rs232/485 switchover freely Size:62*51*83mm
Measurement, and industrial-site signal isolation and long-term transmission and so on. Products include power supply isolation, signal isolation, linearization, a/d conversion and rs-485 serial communication circuit module. Each serial port can connect maximum 256 pcs of isoad series modules, means of communication using character communication protocol or modbus rtu communication protocol. Its instruction set Model selection Isoad16 u(a) - 485: output is rs-485 interface 232: output is rs-232 interface Dimension:83*51*62mm
Features: small volume and convenient installation, probe fault indicator, 220v power supply. Power consumption: less than 3w Measurement range:-30~+110¡ã c Accuracy: 1% Display eee ntc sensor failure (short circuit or open circuit) Power supply: 220v Dimension: 64(l) x31(w) Mounting hole dimension: 58.4(l) x 25.7(w) mm Display eee ntc sensor failure (short circuit or open circuit) Power supply: 220v Dimension: 64(l) x31(w) Mounting hole dimension: 58.4(l) x 25.7(w) mm
Xgq-f suspension type full-automatic washing and dewatering machine 1.The new-generation xgq-f full-automatic washing and dewatering machine is made by combining years of production experience and the after-sales feedback information of a large number of users. 2.It adopts three-layer stainless steel structure, and the inner container and outer cylinder adopt acid-base resistant and corrosion-resistant high-strength 304 stainless steel, ensuring the key parts of the machine is firm and never rusts; the shell of the machine body is made of 304 stainless steel decoration sheet (back panel is coated), and the appearance is elegant. 3.The high-strength steel structure is firm and solid, laying solid foundation for ensuring super-long service life of the machine. 4.Precisely calculated secondary balance weight, high-strength damping spring and car level special shock absorber form unique non-uniform weight lower suspension structure, which easily dissolves vibration, reduces washing noise and does not need special base. Capacity 100kg Drum diameter1200mm Depth 790mm Extraction (w¡¡§¡éd¡¡§¡éh) 1750¡¡§¡é1900¡¡§¡é2000mm Machine net weight 3500kg Wooden box
Mfld electromagnetic flowmeter is operating based on principle of the electromagnetic induction law of faraday, and the sensor consists of measuring tube, electrode, induction winding, iron core and yoke. It is mainly used to measure the volume flow of the conductive liquid and slurry in a close tube, such as the acid, alkali, salt and other fluid which is easurement will not be affected by the density, viscosity, temperature, pressure and conductivity of the liquid. The lining and electrode materials are manufactured with good corrosion resistance and abrasion resistance. Adopt a novel way e and conductivity of the liquid. E program is reliable; 7. The measuring system is bidirectional and three integrators inside: positive total, reverse total and difference value total. The positive total and reverse total are both displayable. It also has multiple ways of output: electric current, pulse; digital communication, hart. 8. The mounting technology of converter is surface mount technology (smt) which possesses self-check and self-diagnose functions. Export standard packing according to buyer's requirements
Mfld electromagnetic flowmeter operates based on the principle of electromagnetic induction law of faraday. Sensor consists of measuring tube, electrode, induction winding, iron core and yoke. It is mainly used to measure the volume flow of the conductive fluid and slurry in a close tube, such as the acid, alkali, salt and other fuild which is high le for the sity, viscosity, temperature, pressure and conductivity of the fluid. 2. There is no obstacle or loss of pressure in the measuring tube. Low requirements for straight tube. 3. The range of caliber is dn15~dn3000, multiple choices are available for the lining of converter and the material of electrode. 4. Adopt a novel way of excitation. Low power consumption, stable zero point and high accuracy. The volume flow range could be up to 1500:1 5. Sensor and transmitter can be made up into two forms: compact-type and remote-type; Export standard packing according to buyer's requirements
Lugb vortex flowmeter is a internationally advanced new type of flowmeter, which is developed based on karman vortex street theory. It is applicable to the measurement of superheated steam, saturated steam, general gas and fluid. Advantages: low pressure loss, wide measurement ratio and high accuracy, simple structure, no moving parts, high reliability . The measurement will not be affected by the density, viscosity, temperature and pressure of the fluid. This item could work smoothly under the temperature of -20¡æ~+250¡æ. Pulse and analog signal can be choose, which could well operate with the computer system. Medium: gas, liquid and steam. ¡«90% rh50¡æ Material : stainless steel, aluminum alloy. Energy supply: dc 24v, li 3.6v Explosion-proof grade: iaiibt3-t6 (intrinsically safe explosion-proof) Export standard packing according to buyer's requirements
Lugb vortex flowmeter is an internationally advanced new type of flowmeter, which is developed based on karman vortex street theory. It is applicable to the measurement of superheated steam, saturated steam, general gas and fluid. Advantages: low pressure loss, wide measurement ratio and high accuracy, simple structure, no moving parts, high reliability. The measurement will not be affected by the density, viscosity, temperature and pressure of the fluid. This item could work smoothly under the temperature of -20¡æ~+250¡æ. Pulse and analog signal can be choose, which could well operate with the computer system. Medium: gas, liquid and steam. Duty cycle: 50%, transmission distance: 1000m Ambient temperature: -25¡æ¡«+55¡æ; ambient humidity: 5¡«90% rh50¡æ Material: stainless steel, aluminum alloy. Energy supply: dc 24v, li 3.6v Explosion-proof grade: iaiibt3-t6 (intrinsically safe explosion-proof) Export standard packing according to buyer's requirements
Idc wire gauge: 22-26 awg, solid or stranded Colour coding: as per 568 a/b standard Spring wire: phosphor bronze alloy plated with 50 micro-inch of gold over 70-100 micro-inch of nickel Idc: phosphor bronze alloy with 100 micro-inch 100% nickel plating Conductor termination: >200 Insulation diameter: 0.7-1.4mm Flammability rating: ul 94 v-0 Safety rating: ul 1863 Wire: 22-26 awg
Product description Learn more about this product Power retention is dependent on the device's battery capability. If your portable, solar-powered battery charger already contains enough electricity, you do not necessarily need to charge your product in direct sunlight.
