HCV series high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and variousirregular waveforms under the condition of complete isolation of the primary side and the secondary side. Itis mainly used in the field of measurement verification and measurement calibration that requires highaccuracy, and rail transit, power quality analysis, power analyzer, medical, aerospace, missile, ship andother fields that require high sensitivity, high stability and high reliability.
BMS500 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under normal
conditions, the control circuit generates a fixed excitation current frequency to alternately place the magnetic
core at the maximum saturation point. When the measured current flows, the primary current is measured by
detecting the symmetry of the saturation point.
The BMS series is suitable for battery monitoring systems that require high accuracy and low offset.
It can realize the isolation measurement between the primary current (high voltage) and the secondary
current (12V system).
PHEV and EV system may use different technologies of batteries. One very important parameter that mayinfluence the stability of the SOC is the temperature. The battery temperature affects vehicle performance, reliability, safety and lift-cycle cost. The BMS500 series is qualified between -40 to 85 but the transducer shows a better accuracyinarestricted temperature range in order to deliver a very accuracy current measurement.
Battery Specification
2000mah lithium ion battery 10c for power tools, full capacity, high cycling, low internal resistance and
ultra-low self-discharge to meet the requirements of your power products.
Capacity 2000 mAh
Minimum Capacity 1980 mAh
Discharge Rate 10C
Nominal Voltage 3.7V
Internal Resistance
17ml
Cycle Life 500
Charge Voltage 4.2V0.03V
Charge Current 0.5C (About 3 hours) 1C (About 2 hours)
Standard Discharge Mode 0.2C Constant current discharge to 2.75V
Max. Continuous Discharge Current 20000mA
Operating Temperature Range Recharge (0-45C) Discharge (-20-60)
Long time Storage Temperature -20~25C
Initial Size Diameter:18.15+0.20mm Height:65.0-0.50mm
High Quality OEM ODM Electrosugical Pencil Diathermy Cable Medical Wiring Harness
Basic information
Model NO.: KH-001.002 Bandaging Materials: PVC Pipe
General Wiring Harness: Injection Molding Assembly Class
Signal: High Voltage Wiring Harness
Shape: Round Interface Type: Banana Plug
Certification: RoHS, ISO9001, ISO13485: 2016
Brand: Comhuge Color: Blue, Black, Green or Customized
Pull and Plug Force:1~4.5kgf Cable Od: 3.2 mm
Banana Terminal: 4.4 mm Cable Length: 3 Meters
Test Standard: En60601-2-2(2018)
Transport Package: Standard Package
Specification: L420*W300*H260MM/L485*W230*H235MM
Trademark: OEM or ODM
Origin: Guangdong, China
Production Capacity: 100000 PCS/Day
ComHuge (Dongguan) Medical Wire Harness Technology Co., Ltd. was established in September 2020, which is located in the world's famous manufacturing city - Humen Town, Dongguan City, Guangdong Province, formerly known as Dongguan Richwood Wire and Cable Co., Ltd. independent of a professional R & D, design, production of medical wiring harness factory. Our factory mainly produces electrosurgical medical equipment medical connection cable, the main products are high-frequency surgical electrode cable (monopolar), high-frequency surgical electrode cable (bipolar), ground pad cable (monopolar and bipolar), blood oxygen cable, ECG monitoring cable, pressure sensing cable, physiotherapy electrode cable, medical corrugated tubing and so on.
Our company obtained the ISO 13485:2016 medical quality management system issued by the third-party SGS certification enterprise and passed the Sedex authorized third party Tianxiang certification audit SMETA 4P Social responsibility enterprise in the same year.
Our enterprise is people-oriented, adhere to the law compliance, product safety and effectiveness of the development of strategic thinking road. Gathered first-class technology research and development team and management elite, with a full set of domestic and foreign advanced production lines and testing equipment, the implementation of a complete set of perfect customer service system, the products meet the domestic GMP/EU CE/USA FDA related laws and regulations, to ensure that the products are safe and effective.
The Sunkye family of TwistPin equipped Micro-D subminiature connectors to offer outstanding mating performance, durability, and minimal contact resistance. Sunkye Microminiature-D Connectors feature high-density micro TwistPin contacts set on 1.27mm centers in arrangements from 9 to 130 contacts. They are available with insulated and uninsulated wire, PCB, solder cup and flex terminations and are supplied as MIL-DTL-83513 or commercial variations. Our mil dtl 83513 connectors and COTS connectors provide a reliable solution for all high-performance interconnect requirements
Description of MIL-DTL-83513 connector
By its very design, the Micro-D type connector system meets all the requirements of robustness, durability, low contact resistance, high current, dielectric strength, shock, and vibration. With 1.27 mm (.050") contact spacing, micro d subminiature, half the size of D type connectors (D series connectors), represent an excellent solution for saving both space and weight. In addition to a complete range of micro d subminiature connectors to 83513 d sub vs micro d, Sunkye also offers Micro-D PCB connectors and cable assemblies in both metal and plastic bodied versions. With its many possible configurations, the technology of micro electrical connectors is perfectly suited to a multitude of systems where weight, miniaturization or signal transmission integrity is paramount: applications benefiting from this technology include everything from missiles and their guidance systems, through oil well drilling tools to medical devices, satellites, and scientific research. For very specific applications such as medical MRI scanners or low magnetic field detection systems, Sunkye has developed a range of non-magnetic connectors using new materials and surface treatments, avoiding ferromagnetic materials. Hermetic micro d connectors are also offered for applications where an enclosure needs to be fully sealed from the outside world.
In addition to the standard range of Micro-D connectors and assemblies, Sunkye is able to offer small electrical pin Nano-D connectors and assemblies based on the highly reliable Twist Pin contact technology.
Different types of MIL-DTL-32139 Nano D Connectors
Description of MIL DTL 32139 Nano D Connector
MIL-DTL-32139 Nano D sub connector are ideal solutions for applications including aerospace, military, industrial, medical or off-shore which require extreme miniaturization, space or weight saving and reliability. Sunkye's nanoconnectors meet the requirements of MIL-DTL-32139.
The Twist Pin contact of mini d connector by its design and performance enables the system to meet the most severe requirements of ten significantly more so than stipulated in the MIL-DTL-83513 and MIL-DTL-32139 standards. The male Micro-D contact is made up of 10 strands of beryllium-copper and copper alloy twisted together, welded then bumped. These sprung strands are in fact compressed during insertion into the turned female contact and therefore a high number of electrical contact points are permanently assured while retaining flexibility and ease of insertion/extraction. The bulged point will be compressed inside the socket during insertion. Insertion and retention performance of the twist pin and socket mated pair. Both socket contact chamfer and twist pin hemispherical radius contribute to ensuring adequate insertion even in case of misalignment. As a professional nano connector supplier, Sunkye offers top-quality nano connectors for sale. Feel free to contact us for more information.
Micro Wire Backshell Connector for Choice
Description of Micro Wire Backshell Connector
Different backshell types are available for Split EMI/RFI/filter or accommodate larger wire bundles or screw locks allowing the connectors to be fully mated before the hardware is fastened, or for wire or cable strain relief, Sunkye Mil DTL 83513 backshell electrical connectors provide perfect performance, which widely used in military area, aerospace, aviation, electricals hip-building, defense system, etc.
MICRO-D EMI BACKSHELL of Wire Backshell Connector
Micro-D aluminum backshell for EMI termination.
Supplied with stainless steel hardware.
Various entry sizes & shapes.
Available for standard and micro termination.
Shell size from 9 to 100.
Removable jackscrews according to MIL-DTL-83513/05
For pigtail crimping & solder cup connectors only.
2 sizes of hardware: one version for shell sizes from 9 to 69 ways and another version for the 100-way shell size.
1 kit consists of 2 screws and 2 e-rings.
Hex socket head or slot head.
Material: passivated 300 series stainless steel
Contact arrangements of Micro D Backshell Connector
Series * Micro D Connector
Terminal Mounting * Crimping connector
Contacts *Twist pin contacts, high density interconnection, Beryllium copper (BeCu), gold over nickel plating
The thickness of Gold plating * â?¥1.27micron
TWIST PIN * Male contact, fitted to plug connector.
Socket * Female contact, fitted to socket connector (also known as socket).
Insulator* 20% GFPPS (20% glass filled polyphenylene sulfide)
Insert * Moulded insulation housing, separating each connection.
Interfacial Seal * Fitted to socket connector only
Shell *Connector metal body plated nickel or cadmium.
Jackscrew *High or low profile, hexagonal socket or slotted head.
Jackpot* Mates with jackscrew.
LCP * Liquid Crystal Polymer.
Potting * Epoxy compound used as an encapsulant.
Cable * AFR250 (PTFE) MIL-DTL-681
Wire length * â?¤6 meters (Recommend)
Standard connector * Manufactured to the standard dimensions and specifications.
Special connector * A standard connector modified to meet specific requirements.
Custom-made connector * Designed to meet specific customer requirements.
Pigtail connector * Connector with insulated or uninsulated wires.
Harness * Multi-branched cable assembly.
Sunkye International was originally developed in the early 1950s and was one of the Twist pin/ Micro D/Nano D connector companies to license this technology and improve it.
