Mainstream Value line, ARM Cortex-M3 MCU with 32 Kbytes Flash, 24 MHz CPU, motor control and CEC functions
Mainstream Value line, ARM Cortex-M3 MCU with 128 Kbytes Flash, 24 MHz CPU, motor control and CEC functions Beijing Shouxi Zhixin Technology Co. LTD works on IC reverse analysis such as microcontroller decryption, chip crack, MCU attack, DSP reverse.
Mainstream Value line, ARM Cortex-M3 MCU with 32 Kbytes Flash, 24 MHz CPU, motor control and CEC functions Beijing Shouxi Zhixin Technology Co. LTD works on IC reverse analysis such as microcontroller decryption, chip crack, MCU attack, DSP reverse.
The 56F832X/812X, a member of the 56800E core-based family of digital signal controllers (DSCs), combines the processing power of a DSP and the functionality of a microcontroller. Inside a compact 48 or 64-pin LQFP, the device features: up to 60 MIPS performance (at 60 MHz) along with 32 KB of on-chip Flash memory and a comprehensive set of peripherals. It extends the capabilities of the 56F8322/8122 by adding additional analog-to-digital converter (ADC) inputs and timer input/output pins, among other enhancements.
Features DSP and MCU functionality in a unified,C-efficient architecture with up to 32 MIPS at 32 MHz core frequency 64 KB (32K x 16) program Flash 8 KB (4K x 16) unified data/program RAM Integrated Peripherials: Controller area network (CAN) One 6-channel pulse width modulation (PWM) module Three programmable interval timers (PITs) Up to 53 GPIO lines Two up to 8-channel 12-bit analog-to-digital converters (ADCs) Two 12-bit digital-to-analog converters (DACs) This product is included in NXP’s product longevity program, with assured supply for a minimum of 10 years after launch
Features DSP and MCU functionality in a unified, C-efficient architecture with up to 32 MIPS at 32 MHz core 32 KB of Flash memory 4 KB of RAM Integrated peripherials: One 6-channel PWM module Two 12-bit up to 4-channels ADC Two internal 12-bit DAC Up to three PIT QSCI QSPI I2C Up to 35 GPIO This product is included in NXP’s product longevity program, with assured supply for a minimum of 10 years after launch
Mainstream Value line, ARM Cortex-M3 MCU with 64 Kbytes Flash, 24 MHz CPU, motor control and CEC functions Beijing Shouxi Zhixin Technology Co. LTD works on IC reverse analysis such as microcontroller decryption, chip crack, MCU attack, DSP reverse.
The NXP MC56F800x family of digital signal controllers (DSCs) offer the functionality of a microcontroller with a flexible set of peripherals. The entry-level MC56F8006 and MCF56F8002 DSCs provide the most cost-effective solutions for mathematically intensive, power-sensitive, real-time control applications.
Features DSP and MCU functionality in a unified, C-efficient architecture with up to 32 MIPS at 32 MHz core frequency Up to 16 KB of Flash memory Up to 4 KB of RAM Integrated peripherals: Up to 6-channel PWM module Two up to 4-channel 12-bit ADCs One serial communication interface (SCI) with LIN slave functionality One serial peripheral interface (SPI) One inter-integrated circuit (I2C) port Up to 26 GPIOs This product is included in Our product longevity program, with assured supply for a minimum of 10 years after launch
1.Reliable quality as well as competitive price 2.Large volume flow and long life expectancy 3.High speed and large air flow 4.Low noise and high efficiency 5.Ball or sleeve bearing for options 6.Sample lead time:3-5 days 7.Delivery lead time:2 weeks 8. Professional service we are ac /dc fan factory , welcome oem and odm .
1.Reliable quality as well as Competitive price 2.Large volume flow and long life expectancy 3.High speed and large air flow 4.Low noise and high efficiency 5.Ball or sleeve bearing for options 6.Sample lead time:3-5 days 7.Delivery lead time:2 weeks 8. Professional service We are AC /DC fan factory , Welcome OEM and ODM .
Product features: 1.Energy efficient light source with high luminous efficiency. Imported LED chip, light efficiency reaching to 100-130lm/v, saving more than 60% energy in comparison to halogen lamp. 2.Casing material using tensile aluminum, heat fast, good heat dissipation performance. 3.Compact structure, waterproof IP65, surface anodic oxidation, corrosion-proof WF2. 4.Radiator uses 6063 aluminum alloy, heat conduction coefficient is 201W/mk. 5.The design of sun fancy heat radiation, the chip consistency directly with the aluminum completely, to ensure the best thermal conductivity. 6.Environmental protection without pollution. No lead, mercury; no infrared, ultraviolet radiation 7.Light comfortable even no shadow. Good color rendering, color temperature close to the sunlight. 8.The power supply of constant current and constant voltage control. Can withstand the power fluctuations, no noise, no stroboscopic. 9.Reflector has a small angle and large angle two options to meet the needs of different heights of lighting. Specifications: Rated Voltage: AC 220V Rated Power: LED 150W(200W Can be customized) Luminous flux: 150W 15000lm Casing material: High toughed aluminum alloy Transparent part material: Special toughed glass Waterproof: IP66 Corrosion-proof: WF2 Weight: 9Kg Installation: Hanging type, chain type Reflector optional angle: 45°/120°
Product Features: 1. High efficiency and low energy consumption: imported LED chip for light source, light efficiency reaching to 100-130lm/v, saving more than 60% energy in comparison to halogen lamp. 2. One single casting aluminum case, hi-po electrostatic powder plastic spraying surface, corrosion and rust resistant. 3. High purity aluminum reflection cup proceed by chemical brightening and anodize, color never change,high reflection efficiency. 4. 4mm special anti-dazzle steel glass, heat and impact resistant 5. Radiator consists of 22 pieces of 1070 aluminum radiating sheet, the heat transmitting index of 1070 aluminum is 226W/mk. 6. Even and comfortable light, no overlapping shadow; Good color rendering, color temperature close to the sunlight 7. Environment friendly, no lead and mercury, no infrared and ultraviolet ray radiation 8. Power with constant current and constant voltage control; can endure the undulation from the grid, no noise and no stroboflash. 9. Exterior fastener uses stainless steel, dainty and endurable. 10. Built-in power supply. Main Parameters: Rated Voltage: AC 220V Rated Power: LED 50W Luminous flux: 50W 5000lm Casing material: High strength aluminum alloy Transparent part material: Special steel glass Waterproof: IP65 Corrosion-proof: WF2 Weight: 2.8Kg Dimension: 281.6*207.3*118.32mm Mounting method: wall mounted, ceiling mounted and seat mounted Product heat dissipation advantage: 1.High thermal conductivity 6063 aluminum radiating sheet: 201W/mK,it is 2.3 times higher than traditional ADC12 die-casting aluminium: 96W/mK. 2.Chip substrate using red copper,thermal conductivity: 401W/mk,capacity of heat transmission increased double times compared with aluminum ? 3.Thermally Conductive Silicone use DOW CORNING,thermal conductivity: 3.3,gray color,it makes the chip heat passed through thermal conductive silicone rapidly to the radiator fins. General lamps and lanterns manufacturers choose white thermal conductive silicone, heat conduction coefficient is 0.8~1.2 4.Lighting up half an hour,negative spot weld temperature less than 65 degree;fins in back temperature different in 5 degree;chip temperature different with chip back also in 5 degree. 5.The heat sink thickening processing, greatly increases the heat dissipation area, heat faster and more efficient. 6.Uniform light color
Product features: 1. High efficiency and energy-saving: imported integrated LED chip with high efficiency for light source, light efficiency reaching to 100-130lm/v, saving more than 60% energy in comparison to halogen lamp. 2. Highest explosion-proof level, IP66, the whole lamp has the supreme explosion-proof protection performance. 3. Diecasted hard aluminum alloy casing with pressure-casted formation, surfacing high voltage electrostatic powder coated, rust resistant and corrosion resistant. 4. Design of cavities for light source and electric makes it efficiently avoid the heat from adding together, and so it has good heat dissipation performance, lamp is more stable and reliable. 5.Transparent high boron silicon toughed glass, anti-impact, collision and corrosion resistant, resistant to rapid heat change. 6.With constant current & voltage control, and short-circuit & over voltage protection, driver can work even under fluctuated grid without noise or stroboflash. 7.Cavities for light source, electric parts and wiring terminals are separated from each other to ensure the system’s stability; The wiring cavity is designed to facilitate the users’ wiring. 8. Multi-mounting modes. Main parameters: Rated voltage: AC 220V Rated power: LED 50W (40/60W can be customized) Luminous flux: 50W 5000lm Casing material: High toughed aluminum alloy Transparent part material: Special toughed glass Waterproof level: IP66 Corrosion-proof level: WF2 Explosion-proof mark: Ex dIICT4 Gb/DIP Weight: 3.8Kg Mounting method: wall mounted, suspension mounted, ceiling mounted, flange mounted, banister mounted
Product features: 1.IP65, corrosion-proof WF2 2. Imported LED chip and patented integrated circuit packaging technology, light efficiency reaching to 100-130lm/v, saving more than 60% energy in comparison to halogen lamp. 3. High hardness aluminum alloy casing, corrosion resistant against rust and heat. 4.Non-screw maintenance system, easy to operate and maintenance. 5.High purity aluminum reflector, with original purity of 99.9% to be processed by anodic oxidation, anti-oxidation, anti-discoloration, good light reflection. 6. SUS304 installation fastener, corrosion resistant against air, water, acid, alkaline, salt and other chemical solutions, applicable to various dreadful environment for long time. 7. 4mm steel glass transparent part, with light transmittance reaching 93%. Mounting bracket can be rotated to the angle range of 280°, satisfying various light casting requirement. 8. No pollution, Green, and environment-friendly. ?no lead, mercury and other harmful substance inside the light source; ?no infrared or ultra-violet light, the light emitting from the light source won’t increase the air temperature; ?no noise or any other pollution to the environment. Specifications: Main parameters Units Value Power w 50 Rated voltage V 220 Luminous flux lm 5000 Waterproof / IP65 Corrosion-proof / WF2 LED chip knot temperature ° =85° Life time h 50000 Power factor % 95 Dimensions mm 310.47*220*50 Weight kg 3 Mounting method / wall mounted, ceiling mounted and seat mounted
This equipment is used to dry and mix the powder-shaped,particle-shaped and fibreshaped matter in the trade of chemical industry,medicine-manufacturing and grocery etc.,especially those heat sensitive,oxidable,volatile and polluting matter and the matter whose impregnant needs to be reclaimed.
MPPT solar charge controller with timer and battery type selection Key Features 1)MPPT with conversion efficiency up to 99% under charging mode. 2)12V/24V/48V system auto recognize. 3)Controller with Intelligent design and free lifelong online upgrade service. 4)LCD and LED show parameters and system information,like PV input voltage,battery voltage. 5)With intelligent design,the device can be upgraded online lifelong. 6)Nominal maximum solar/PV input is DC 150V . 7)Three Stages Charge mode: fast charge, constant charge, floating charge. 8) With high efficient MPPT operation scheme and adopting TI28035 chip. 9) Support kinds of batteries:Gel,Sealed lead acid,vented,NiCd,etc. 10)Extensible LAN remote control. 11)With CE, ROHS, FCC, PSE certifications. 12)7 languages. 13)2 years warranty
Mini Spray Cooli Fan with power bank Model: WY-F4 **Strong wind, Humidifying & cooling air & moist skin **Good for lady to moist skin in dry air, beauty product. **2000mA batteries 5-6 hours run with fully charged **Color: Black, blue, Pink, water tank: 30ml *. Cooling air with power bank function *. Air-condition & cooling Fan function. *. Humidifying & cooling air double function. *. Durable usage, over 3 years working life. *. Large capacity battery 2000mA ,strong wind.
Rechargeable Monkey Fan Model:WY-F5 ( To blow cool air ) 2000mA batteries 4-5 hours run with fully charged Color:Black, Pink, Blue, Yellow *. USB charging, Air-condition & cooling Fan. *. Battery Can be recharged over 1000times *. Durable usage, over 3 years working life. *. Mini design with lanyard, convenient to carry *. Battery 2000mA ,strong wind, low noise. *. Rated revolution:3500rmp; Voltage:3.7V *.Best and innovative gifts for business/personal. -
We provide following affordable services Web services Mobile services Android apps Ios apps Phonegap development Php development
