Vacuum pump improved by raising the intensity in order to prevent cent rotor and axis deviation from external influences. Features: 1. Lower noise:pressure pluses are the major noise source in blowers. The trundean roots blower design can efficiently reduce noise by approximately 5 db. 2. Lower energy consumption:trundean roots blower are designed to control backflow pressure to the rotor in order to reduce energy consumption. 3. Longer bearing life:less vibration transmitted through the lobe results approximately 20% longer bearing life. -
With USB1.0+audio SGCC Oem
Features: Model: 86blf01; 86blf02; 86blf03; 86blf04 Number of poles: 8 Number of phases: 3 Nominal voltage vdc: 48 Rated speed rpm: 3000 Continuous torque n-m: 0.35~1.4 Output power watts: 110~440 Peak torque1 n-m: 1.05~4.2 Peak current amps: 10.8~38.0 Line to line resistance ohms: 0.47~3.2 Line to line inductance mh: 0.71~2.1 Torque constant n-m/amps: 0.11~0.115 Back emf v/krpm: 11.5~12.0 Rotor inertia gòcm2: 350~1250 Body length (l) mm: 57~94 Mass kg: 1.1~2.75
Features: Modelú¦ 17hm201ú+ 17hm206ú+ 17hm208ú+ 17hm602ú+ 17hm604ú+ 17hm607ú+ 17hm805ú+ 17hm809ú+ 17hm810 Step angel ( íp): 0.9 Motor length l(mm): 34~48 Rate voltage (v): 2.4~11.2 Rate current (a): 0.4~2.4 Phase resistance ( ª+ ): 1~28 Phase inductance (mh): 1.8~30 Holding torque (g.Cm): 1400~4800 Lead wire (no.): 4/6 Rotor inertia (g. C¬o): 34~68 Detent torque (g.Cm): 180~260 Motor weight (kg): 0.2~0.34
Features: Modelú¦pm25s-048-01ú+pm25s-048-02ú+pm25s-048-02bú+pm25s-048-03aú+pm25s-048-09ú+pm25s-048-10ú+pm25s-048-11ú+pm25s-048-15ú+pm25s-048-17ú+pm25s-048-19ú+pm25s-024-01ú+pm25s-024-02ú+pm25s-024-03ú+pm25s-024-04ú+pm25s-024-05ú+pm25s-024-09ú+pm25s-024-12ú+pm25s-024-14 Step angel ( íp) 7.5~15 No. Of phaseú¦ 2/4 Rate voltage (v): 5~24 Rate current (a): 0.1~1.3 Phase resistance ( ª+ ): 5~120 Phase inductance (mh): 1.5~31 Holding torque (g.Cm): 100~230 Detent torque: 45~60
Introduction The d2hb882mb is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved. Features Low cost and good high-speed torque 14 selectable resolutions Supply voltage up to +80vdc Suitable for-2-phase and 4-phase motors Output current up to 5.86a Dip switch current setting 8different values Optically isolated input signals Pulse frequency up to 200khz Automatic idle-current reduction Small size (107*97*48), weight:1kg
Introduction The d2hb542ma is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved. Features Low cost and good high-speed torque Supply voltage up to +45vdc Output current up to 5.86a Optically isolated input signals Automatic idle-current reduction 14 selectable resolutions Suitable for-2-phase and 4-phase motors Dip switch current setting 8 different values Pulse frequency up to 200khz Dip switch current setting 8 different values Small size (122.2*90*33), weight:0.3kg
Main products and standards: WF/WFD series generator 6KW-1200KW; Engine brand Prime power China weichai: 20kw-150kw Cummins: 40kw-1000kw Shangchai : 50kw-300kw Volvo : 75kw-450kw Steyr: 64kw-200kw Daewoo: 24kw-500kw Mwm : 150kw-1500kw Jichai : 500kw-1000kw Nantong : 75kw-500kw Deutz: 180kw -450kw. use the containers: 20 feet and 40 HQ.
Dong guan foersheng mechanical & electrical co., ltd. Is a subsidiary company of hong kong fenglisheng international group limited. Our company is a professional manufacturer who has 9 years' experience of producing regenerative blowers, side channel blowers. Our major product is multi-series regenerative blowers/side channel blowers, which are widely used for plastic machinery blowing, extruding, laminating, coating, weaving, printing, cutting, loading, welding, drying, conveying and heating. It is also useful for agriculture machinery, environment control, sewage treatment and fishery machinery. It has the following features, low noise and vibration, high reliability, stable and high-pressure airflow. Packing
Hybrid Stepping Motor(110BYGH) Features: Model: 110BYGH99-001; 110BYGH150-001; 110BYGH202-001 Step angel ( íp) : 1.8 Motor Length L(mm): 99/150/201 Rate Voltage (V): 4.95~5.44 Rate Current (A): 5.5~8 Phase Resistance ( ª+ ): 0.67~0.9 Phase Inductance (mH): 12~15 Holding Torque (N.m): 11.2~28 Lead Wire (NO.): 4 Rotor Inertia (g. c¬O): 5.5~16.2 Detent Torque (kg.cm) 5~11.7 Motor Weight (kg): 5~11.7. 110mm,5-11.7kg,28n-m.
Cummins series adopt cummins engines .Through near ten years of cooperation with CUMMINS,Fukangsi/Cummins series with its high reliablity,low use and maintenance cost win the loyaty of many customers in Columbus ,Indiana,(USA)Cummins inc.Serves customers in more than 137 countrise and territories through its network of 680 Company-owned and independet distributor locations and more than 500 dealer locations.As the largest foreign engine investors of China,Cummins possess Chongqing Cummins Engine Co.,Ltd(product M,N,Ksweries engine)and DongFeng Cummins Engine Co.,Ltd(product B,C Lseries engine)and product CUMMINS engines with globally uniform quality standard .Fukangsi/Cummins guarantee the most convenience and shortcut service chrough their service network countrywide.
Mechanical dimension & rated power: Frames Size Rated Power 60cm X 60cm 200-600 W 80cm X 80cm 400-1,000 W 90cm X 90cm 750-1,000 W 110cm X 110cm 600-1,800 W 130cm X 130cm 1,000-3,800 W 180cm X 180cm 2,700-4,500 W For more information, please be free to contact us for detailed PDF datasheets. Standard package.
Y series motor is a kind of low-voltage three phase asynchronous motor, which is a basic series for general applications. This series can meet requirements for general application international standard with frame range 80-135. Y series has the advantages of high efficiency, energy saving, high operational performance, small vibration, low noise, long life, high reliability, etc. Installation dimension and power grade completely conform to IEC standard. It employs Grade B insulation, IP44 grade for shell protection and IC411 cooling mode. The rated voltage and frequency of Y series are 380V, 400V, 415V, 440V, and 50Hz, 60Hz. Y series asynchronous motor is widely applied for machinery and equipments without special requirements, such as agricultural machinery, food machinery, fan, agitator and air compressor, etc. For more information, please be free to conact us for detailed PDF files. Standard package.
Y2 series induction motors, developed with new technology are renewal and upgraded products of Y series. Y2 series motors are defined as totally enclosed, fan cooled, squirrel cage type and noted for ití»s design, excellent appearance, compact structure, low noise, high efficiency, large starting torque, excellent starting performance, easy maintenance, etc. The motors are adopted with F class insulation and designed with assessing method for insulation system according to international practice. Y2 series motors are widely used in various machinery and equipments, driving equipments etc. Such as machine tools, blower, pumps, compressors, transporters, agricultural and food processing machinery Work environment Ambient temperature: -15íµ~40íµ Altitude: Not exceed 1000 meters Rated voltage: 380V Rated frequency: 50Hz Connection: Y start-connection for 3 KW and below, Delta-connection for 3 KW or more Duty: S1 Insulation degree: F Cooling method: IC411 Protection: The main body of motor reach IP54; the terminal connection box reach IP55 For more information, please be free to conact us for detailed PDF files. . Standard package
Three phase electric motor.
Electrical specifications: Series Mode Series Model¦+a+t Step angle ( íp)+·T¦ñ Motor length (mm)¦tߘ Rated current (a)¦t+F Phase Resistance ( ª+ )¦t+ Phase Inductance (mh)¦ßª° Holding Torque (n.Cm min)¦e+ߪ° Detent Torque (n.Cm max)+¬¦»¦¯ß+ Rotor Torque (g.Co)=n¯ Lead Wire (no.)÷°ß+ Motor Weight (g) 57bygh061023hs06011.8411.05.25.5402.51506470 57bygh0406223hs04051.8410.621224552.51504470 57bygh042023hs04081.8412.01.22.5552.51504470 57bygh4406223hs44121.8450.621226802.81904520 57bygh442523hs44251.8452.51.02.2802.81904520 57bygh1406223hs54061.8510.6213281102.81904520 57bygh142523hs54251.8512.51.23.21102.81904520 57bygh160823hs56021.8510.86.89.2623.02306590 57bygh561523hs66021.8561.53.25.5903.52806590 57bygh542523hs64031.8562.51.34.21103.52804680 57bygh543023hs64301.8563.00.82.41103.52804680 57bygh544223hs64041.8564.20.41.21103.52804680 57bygh641023hs74011.8641.07.5201505.03804850 57bygh642523hs74251.8642.51.54.51505.03804850 57bygh643023hs74301.8643.00.82.31505.03804850 57bygh644223hs74041.8644.20.551.21505.03804850 57bygh761523hs86031.8761.54.57.81406.044061050 57bygh742523hs84251.8762.51.86.51806.044041050 57bygh743023hs84301.8763.01.03.51806.044041050
Hybrid stepping motor
Specifications: 1) defrosting heater: applicable to indirect-cooling refrigerator, cooler, air-conditioner, pipe heater and some home appliance. 2) material: quartz tube 3) ambient temperature: -60ípc ~ +85ípc 4) resistant voltage in water: 2, 000v/min (normal water temperature) 5) insulated resistance in water: 750mª+ 6) power error (resistance): ía7% 7) firmness of connection end: í²50n 8) heavy duty glass construction 9) protective oxide coated element wire for long-term heater life 10) high temperature molded silicone end caps 11) special hard end caps 12) can be manufactured to proper length Any
Specifications: 1) defrosting heater: applicable to indirect-cooling refrigerator, cooler, air-conditioner, pipe heater and some home appliance. 2) material: quartz tube 3) ambient temperature: -60c ~ +85c 4) resistant voltage in water: 2, 000v/min (normal water temperature) 5) insulated resistance in water: 750mª+ 6) power error (resistance): a7% 7) firmness of connection end: ²50n 8) heavy duty glass construction 9) protective oxide coated element wire for long-term heater life 10) high temperature molded silicone end caps 11) special hard end caps 12) can be manufactured to proper length Any
Drum heater: Through heating up the liquid in the barrel, the coagulation can be easy to take Out, such as the adhesive agent in the barrel, bituminous, the grease, the pitch, The paint, the paraffin wax, the oil and respectively resin raw materials. The size Can be made as per your requirements. Drum heater and pail heaters drum and pail heaters can provide practical, Efficient means of freeze protection, viscosity control and maintenance of Materials at elevated temperatures. Drum and pail heaters conduct heat Through the drum wall to the product inside. Adjust the thermostat to Automatically maintain the correct temperature. We have alll kinds of drum and Pail heaters for various sizes, from 5-gallon drum and pail up to a 55-gallon Drum and pail. Drum heaters can operate at higher temperatures and work faster On metal drums. We also have more gentle drum heaters for your plastic and fiber Drums. Heating element in durm heater is laminated between two layers of 0.6mm Fiberglass reinforced silicon rubber and has an adjustable thermostat that goes From 50íp f to 410íp f (10íp c to 210íp c). Each heater band is equipped with a Six-foot cord set (230 volt heater bands without a plug). A built-in metal Screen is grounded electrically for safety. All heaters are high potential Dielectric tested at 1500 volts at the factory. Drum heaters are available with Either a 115 or 230 volt rating. Drum and pail blanket heaters Drum blanket heaters provide more efficient, more uniform heating with better Temperature control. Rugged aluminized cloth has 1" of fiberglass insulation for Less heat loss and increased worker safety. Provides outstanding freeze Protection, as well as temperature and viscosity control. Velcro fasteners make Installation easy for a single person. Any
